# Makefile.in generated by automake 1.10 from Makefile.am. # doc/Makefile. Generated from Makefile.in by configure. # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. # libEtPan! -- a mail stuff library # # Copyright (C) 2007 g10 Code GmbH # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # 3. Neither the name of the libEtPan! project nor the names of its # contributors may be used to endorse or promote products derived # from this software without specific prior written permission. # # THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE # ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF # SUCH DAMAGE. # libEtPan! -- a mail stuff library # # Copyright (C) 2007 g10 Code GmbH # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # 3. Neither the name of the libEtPan! project nor the names of its # contributors may be used to endorse or promote products derived # from this software without specific prior written permission. # # THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE # ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF # SUCH DAMAGE. # Description of the build system # =============================== # The build system uses automake and autoconf mostly in the usual way. # A typical work flow for working with the SVN version would be: # $ autoreconf # $ ./configure --enable-maintainer-mode # $ make # All Makefile.am files must contain: # include $(top_srcdir)/rules.mk # If BUILT_SOURCES are desired, they need to be defined *after* the # above include by a += directive, for example: # BUILT_SOURCES += foo.h # This is because rules.mk defines BUILT_SOURCES for its own purposes. # Header Link Farm # ================ # The public header files of libetpan are scattered throughout the # source tree and defined by libetpaninclude_HEADERS automake variables. # (The corresponding libetpanincludedir is defined in rules.mk). Before # building anything else in the project, we prepare a header link farm # in include/libetpan (this directory will be created). The header link # farm is generated automatically when any Makefile (or other # configure-generated file) is modified, for example by editing # Makefile.am in maintainer mode. This ensures that all modifications # to libetpaninclude_HEADERS variables are picked up properly. # The header link farm is built using the BUILT_SOURCES mechanism of # automake, which means that it will only be built by "make all", "make # check" and "make install". This means that eithr of these commands # needs to be used before targeting individual project files works. If # the header link farm should be generated or updated manually, the # following command can be used in the *top-level build directory*: # $ rm stamp-prepare; make stamp-prepare pkgdatadir = $(datadir)/libetpan pkglibdir = $(libdir)/libetpan pkgincludedir = $(includedir)/libetpan am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = x86_64-mandriva-linux-gnu host_triplet = x86_64-mandriva-linux-gnu DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ $(top_srcdir)/rules.mk subdir = doc ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = SOURCES = DIST_SOURCES = DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = ${SHELL} /home/mandrake/rpm/BUILD/libetpan-1.1/missing --run aclocal-1.10 AMTAR = ${SHELL} /home/mandrake/rpm/BUILD/libetpan-1.1/missing --run tar API_COMPATIBILITY = 16 API_CURRENT = 16 API_REVISION = 0 API_VERSION = 16:0:0 AR = ar AS = as AUTOCONF = ${SHELL} /home/mandrake/rpm/BUILD/libetpan-1.1/missing --run autoconf AUTOHEADER = ${SHELL} /home/mandrake/rpm/BUILD/libetpan-1.1/missing --run autoheader AUTOMAKE = ${SHELL} /home/mandrake/rpm/BUILD/libetpan-1.1/missing --run automake-1.10 AWK = gawk BUILD_FILEVERSION = 1,1,0,0 BUILD_REVISION = 0 BUILD_TIMESTAMP = 2012-07-19T06:26+0000 CC = gcc CCDEPMODE = depmode=gcc3 CFLAGS = -O2 -Wa,--compress-debug-sections -gdwarf-4 -fvar-tracking-assignments -frecord-gcc-switches -Wstrict-aliasing=2 -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fPIC -O2 -ffast-math -funroll-loops -g0 -W -Wall CPP = gcc -E CPPFLAGS = -D_REENTRANT CXX = g++ CXXCPP = g++ -E CXXDEPMODE = depmode=gcc3 CXXFLAGS = -O2 -Wa,--compress-debug-sections -gdwarf-4 -fvar-tracking-assignments -frecord-gcc-switches -Wstrict-aliasing=2 -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fPIC CYGPATH_W = echo DBLIB = -ldb DEFS = -DHAVE_CONFIG_H DEPDIR = .deps DLLTOOL = dlltool ECHO = @ECHO@ ECHO_C = ECHO_N = -n ECHO_T = EGREP = /bin/grep -E EXEEXT = F77 = @F77@ FFLAGS = @FFLAGS@ GNUTLSLIB = -lgnutls -lgcrypt -lgpg-error -lz GREP = /bin/grep INSTALL = $(SHELL) $(top_srcdir)/install-sh -c INSTALL_DATA = ${INSTALL} -m 644 INSTALL_PROGRAM = ${INSTALL} INSTALL_SCRIPT = ${INSTALL} INSTALL_STRIP_PROGRAM = $(install_sh) -c -s LDFLAGS = -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags -Wl,--hash-style=gnu -s -lcurl -lexpat LIBICONV = LIBOBJS = LIBS = -pthread LIBSUFFIX = LIBTOOL = $(SHELL) $(top_builddir)/libtool LN_S = ln -s LTLIBOBJS = MAINT = # MAKEINFO = ${SHELL} /home/mandrake/rpm/BUILD/libetpan-1.1/missing --run makeinfo MKDIR_P = /bin/mkdir -p OBJDUMP = objdump OBJEXT = o PACKAGE = libetpan PACKAGE_BUGREPORT = libetpan-devel@lists.sourceforge.net PACKAGE_NAME = libetpan PACKAGE_STRING = libetpan 1.1 PACKAGE_TARNAME = libetpan PACKAGE_VERSION = 1.1 PATH_SEPARATOR = : RANLIB = ranlib RC = @RC@ REENTRANT = 1 SASLLIBS = -lsasl2 SED = /bin/sed SET_MAKE = SHELL = /bin/sh SSLLIBS = STRIP = strip VERSION = 1.1 VERSION_MAJOR = 1 VERSION_MINOR = 1 abs_builddir = /home/mandrake/rpm/BUILD/libetpan-1.1/doc abs_srcdir = /home/mandrake/rpm/BUILD/libetpan-1.1/doc abs_top_builddir = /home/mandrake/rpm/BUILD/libetpan-1.1 abs_top_srcdir = /home/mandrake/rpm/BUILD/libetpan-1.1 ac_ct_CC = gcc ac_ct_CXX = g++ ac_ct_F77 = @ac_ct_F77@ am__include = include am__leading_dot = . am__quote = am__tar = ${AMTAR} chof - "$$tardir" am__untar = ${AMTAR} xf - bindir = /usr/bin build = x86_64-mandriva-linux-gnu build_alias = x86_64-mandriva-linux-gnu build_cpu = x86_64 build_os = linux-gnu build_vendor = mandriva builddir = . cfg_files = /home/mandrake/rpm/BUILD/libetpan-1.1/libetpan-config /home/mandrake/rpm/BUILD/libetpan-1.1/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/build-windows/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/include/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/src/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/src/bsd/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/src/windows/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/src/data-types/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/src/low-level/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/src/low-level/feed/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/src/low-level/imap/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/src/low-level/imf/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/src/low-level/maildir/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/src/low-level/mbox/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/src/low-level/mh/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/src/low-level/mime/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/src/low-level/nntp/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/src/low-level/pop3/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/src/low-level/smtp/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/src/driver/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/src/driver/implementation/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/src/driver/implementation/data-message/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/src/driver/implementation/db/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/src/driver/implementation/feed/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/src/driver/implementation/hotmail/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/src/driver/implementation/imap/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/src/driver/implementation/maildir/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/src/driver/implementation/mbox/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/src/driver/implementation/mh/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/src/driver/implementation/mime-message/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/src/driver/implementation/nntp/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/src/driver/implementation/pop3/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/src/driver/interface/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/src/driver/tools/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/src/main/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/src/main/libetpan_version.h /home/mandrake/rpm/BUILD/libetpan-1.1/src/engine/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/src/versioninfo.rc /home/mandrake/rpm/BUILD/libetpan-1.1/doc/Makefile /home/mandrake/rpm/BUILD/libetpan-1.1/tests/Makefile datadir = /usr/share datarootdir = ${prefix}/share docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} dvidir = ${docdir} exec_prefix = /usr host = x86_64-mandriva-linux-gnu host_alias = host_cpu = x86_64 host_os = linux-gnu host_vendor = mandriva htmldir = ${docdir} includedir = /usr/include infodir = /usr/share/info install_sh = $(SHELL) /home/mandrake/rpm/BUILD/libetpan-1.1/install-sh libcurlconfig = /usr/bin/curl-config libdir = /usr/lib64 libexecdir = /usr/lib64 localedir = ${datarootdir}/locale localstatedir = /var mandir = /usr/share/man mkdir_p = /bin/mkdir -p oldincludedir = /usr/include pdfdir = ${docdir} prefix = /usr program_transform_name = s,x,x, psdir = ${docdir} sbindir = /usr/sbin sharedstatedir = /usr/com srcdir = . sysconfdir = /etc target_alias = top_builddir = .. top_srcdir = .. # Public header files are defined by libetpaninclude_HEADERS variables. etpanincludedir = $(includedir)/libetpan # We add a recursive target "prepare" which creates the desired links # in include/libetpan from libetpan include files scattered throughout # the source. See also README.rules. # We hook into the BUILT_SOURCES mechanism of automake, see Section # "Built sources" in the automake manual for details. BUILT_SOURCES = $(top_builddir)/stamp-prepare EXTRA_DIST = API.sgml depend.dot DOCUMENTATION layer.fig README.sgml # DSL = /usr/lib/sgml/stylesheet/dsssl/docbook/nwalsh/html/docbook.dsl DSL = /usr/share/sgml/docbook/stylesheet/dsssl/modular/html/docbook.dsl JADE = jade HTML_RENDER = lynx -force_html -nolist -dump # FIXME: This needs more work. CLEANFILES/DISTCLEANFILES need to be # defined. Maybe some documentation should be maintainer-generated # and distributed. The rules below could be more fine-grained. SRC = API README all: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) all-am .SUFFIXES: $(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(top_srcdir)/rules.mk $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --foreign doc/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: # $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): # $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done check-am: all-am check: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) check-am all-am: Makefile installdirs: install: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-exec-am: install-html: install-html-am install-info: install-info-am install-man: install-pdf: install-pdf-am install-ps: install-ps-am installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic clean-libtool \ distclean distclean-generic distclean-libtool distdir dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-info install-info-am install-man install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am # The stamp file depends on all files generated by configure. This # naturally includes all Makefiles which define # libetpaninclude_HEADERS variables for public header files, which are # the files we want. There are some more files in this list, but we # don't mind regenerating the header link farm a bit more often than # necessary. Usually you won't notice a difference as # configure-generated files are updated very rarely. $(top_builddir)/stamp-prepare: $(cfg_files) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) stamp-prepare-target touch $(top_builddir)/stamp-prepare # This target should only be invoked in the top level directory (ie # indirectly through $(top_builddir)/stamp-prepare). It is # responsible for updating the header link farm. First, the header # link farm is deleted by invoking the clean target in the include # directory. Then the header link farm is (re-)generated by # exploiting the recursive targets mechanism provided by automake. # Note that this is exploiting automake internals (automake currently # provides no official hooks for recursive targets). stamp-prepare-target: $(cfg_files) cd include && $(MAKE) $(AM_MAKEFLAGS) clean $(MAKE) $(AM_MAKEFLAGS) RECURSIVE_TARGETS=prepare-recursive prepare touch stamp-prepare # Leaf directories (without SUBDIRS) do not have a target # $(RECURSIVE_TARGETS), so we need to terminate prepare-recursive for # them here. prepare-recursive: # The standard prepare target first recurses, and then calls the # individual rules. prepare: prepare-recursive prepare-am # The local prepare rules are first rules internal to this file # rules.mk, and second rules local to a single Makefile.am file. The # internal rules here create symbolic links for each installed public # header file of libetpan under $(top_builddir)/include/libetpan/. prepare-am: prepare-local @if test "$(etpaninclude_HEADERS)" != ""; then \ echo "$(mkinstalldirs) $(top_builddir)/include/libetpan/"; \ $(mkinstalldirs) $(top_builddir)/include/libetpan/;\ echo "cd $(top_builddir)/include/libetpan/"; \ cd $(top_builddir)/include/libetpan/ \ && for hdr in $(etpaninclude_HEADERS) list_end; do \ if test $${hdr} != list_end; then \ if test -e ../../$(subdir)/$${hdr}; then \ echo "$(LN_S) -f ../../$(subdir)/$${hdr}"; \ $(LN_S) -f ../../$(subdir)/$${hdr}; \ else \ echo "$(LN_S) -f ../../$(subdir)/$(srcdir)/$${hdr}"; \ $(LN_S) -f ../../$(subdir)/$(srcdir)/$${hdr}; \ fi; \ fi; \ done; \ fi # Use this target to extend the prepare rules in a single Makefile.am. prepare-local: # Copyright 2007 g10 Code GmbH # This file is free software; as a special exception the author gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # This file is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY, to the extent permitted by law; without even the # implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. doc: @for i in $(SRC); do \ echo $$i - building html; \ $(JADE) -t sgml -V nochunks -d $(DSL) $$i.sgml > $$i.html; \ \ echo $$i - building txt; \ $(HTML_RENDER) $$i.html > $$i.txt; \ \ echo $$i - building multipage HTML; \ mkdir -p $$i; \ cd $$i; \ $(JADE) -t sgml -d $(DSL) ../$$i.sgml; \ cd ..; \ done # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: