#!/bin/bash
#
# /etc/rc.d/rc.sysinit - run once at boot time
#
# Taken in part from Miquel van Smoorenburg's bcheckrc.
#
HOSTNAME=$(/bin/hostname)
. /etc/init.d/functions
set -m
if [ -f /etc/sysconfig/network ]; then
. /etc/sysconfig/network
fi
# Read in config data.
if [ -f /etc/sysconfig/system ]; then
. /etc/sysconfig/system
fi
if [ -r /etc/hostname ]; then
HOSTNAME=$(cat /etc/hostname)
fi
if [ -z "$HOSTNAME" -o "$HOSTNAME" = "(none)" ]; then
HOSTNAME=localhost
fi
if [ ! -e /proc/mounts ]; then
mount -n -t proc /proc /proc
mount -n -t sysfs /sys /sys >/dev/null 2>&1
fi
PLYMOUTH=
[ -x /bin/plymouth ] && PLYMOUTH=yes
# Only read this once.
cmdline=$(cat /proc/cmdline)
for t in $cmdline; do
case $t in
-s|single|S|s) REQUESTED_RUNLEVEL="S" ;;
[1-9]) REQUESTED_RUNLEVEL="$t" ;;
esac
done
[ -z "$REQUESTED_RUNLEVEL" ] && REQUESTED_RUNLEVEL=$(/bin/awk -F ':' '$3 == "initdefault" && $1 !~ "^#" { print $2 }' /etc/inittab)
[ -z "$REQUESTED_RUNLEVEL" ] && REQUESTED_RUNLEVEL="3"
# killing splash when using single-user mode
if [ "$REQUESTED_RUNLEVEL" == "S" ]; then
[ -n "$PLYMOUTH" ] && /bin/plymouth quit 2>/dev/null
fi
uname_r=`uname -r`
# Read in config data.
if [ -f /etc/sysconfig/speedboot ]; then
. /etc/sysconfig/speedboot
fi
if strstr "$cmdline" speedboot= ; then
for arg in $cmdline ; do
if [ "${arg##speedboot=}" != "${arg}" ]; then
SPEEDBOOT=${arg##speedboot=}
fi
done
fi
if [ "$REQUESTED_RUNLEVEL" != 5 -o -f /etc/rc.d/rc5.d/S*network-auth -o -f /etc/crypttab ]; then
SPEEDBOOT=no
fi
# disable speedboot if more than one profile is found (and not selected in cmdline)
if echo /etc/netprofile/profiles/* | grep -q ' ' ; then
if ! strstr "$cmdline" PROFILE= ; then
SPEEDBOOT=no
fi
fi
if strstr "$cmdline" failsafe ; then
SPEEDBOOT=no
fi
# Check to see if systemd is used as the init system and disable speedboot as it
# generally messes things up (manifests itself as user permission problems,
# especially with autologins).
if [ "$SPEEDBOOT" != "no" ]; then
if /bin/mountpoint -q /sys/fs/cgroup/systemd; then
SPEEDBOOT=no
fi
fi
# Check if a possible DKMS display driver is queued to be built on this boot
# or an interfering driver was loaded by initrd.
if [ "$SPEEDBOOT" != "no" ] && [ -x /sbin/display_driver_helper ] && ! /sbin/display_driver_helper --check-speedboot; then
SPEEDBOOT=no
fi
if [ "$SPEEDBOOT" = "probe" ]; then
SPEEDBOOT_PROBE=yes
fi
if [ "x$SPEEDBOOT" = "xauto" ]; then
STATUS=`grep -m 1 "$uname_r" /var/lib/speedboot/status 2>/dev/null`
case "$STATUS" in
*first\ time*) SPEEDBOOT=yes ;;
*FAILED*) SPEEDBOOT=no ;;
*OK*) SPEEDBOOT=yes ;;
*STANDARD\ BOOT*) SPEEDBOOT=yes ;;
*) SPEEDBOOT=no ;;
esac
fi
if [ "$SPEEDBOOT" = "yes" ]; then
export SPEEDBOOT
PROMPT=no
else
unset SPEEDBOOT
fi
if [ "x$SPEEDBOOT" != "xyes" ]; then
if [ ! -d /proc/bus/usb ]; then
modprobe usbcore >/dev/null 2>&1 && mount -n -t usbfs -o devmode=0664,devgid=43 /proc/bus/usb /proc/bus/usb
else
mount -n -t usbfs -o devmode=0664,devgid=43 /proc/bus/usb /proc/bus/usb
fi
fi #SPEEDBOOT
if [ -f /.readahead_collect -a -r /etc/sysconfig/readahead ]; then
. /etc/sysconfig/readahead
if [ "x$READAHEAD_COLLECT" == "xyes" -a ! -f /forcefsck -a -x /sbin/readahead-collector ]; then
/sbin/readahead-collector
fi
elif [ -x /sbin/readahead_early ]; then
/sbin/readahead_early > /dev/null 2>&1
fi
if [ -x /etc/rc.early.local ]; then
. /etc/rc.early.local
fi
# Unmount the initrd, if necessary
# (pixel) do not unmount if /initrd/loopfs is mounted (happens for root loopback)
# (bluca) handle udev /dev tmpfs here since kernel will happily umount /dev after initrd end
# (blino) do it before the udev service is started so that it uses the /dev tmpfs from initrd
if LC_ALL=C grep -q /initrd /proc/mounts && ! LC_ALL=C grep -q /initrd/loopfs /proc/mounts ; then
if LC_ALL=C grep -q /initrd/dev /proc/mounts; then
mount --move /initrd/dev /dev
fi
action "Unmounting initrd: " umount -l /initrd
/sbin/blockdev --flushbufs /dev/ram0 >/dev/null 2>&1
fi
if [ "x$SPEEDBOOT" = "xyes" ]; then
/sbin/start_udev
udevadm trigger --action=add --subsystem-match=pci --attr-match=class="0x0c03*"
udevadm trigger --action=add --subsystem-match=block
udevadm settle &
UDEV_DISK_PID=$!
udevadm trigger --action=add --subsystem-match=mem --subsystem-match=input --subsystem-match=tty --subsystem-match=acpi --subsystem-match=rtc --subsystem-match=hid
udevadm trigger --action=add --subsystem-match=pci --attr-match=class="0x060000*"
udevadm trigger --action=add --subsystem-match=pci --attr-match=class="0x03*"
udevadm settle &
UDEV_PID=$!
fi
PLYMOUTH=
[ -x /bin/plymouth ] && PLYMOUTH=yes
# Check SELinux status
SELINUX_STATE=
if [ -e "/sys/fs/selinux/enforce" ] && [ "$(cat /proc/self/attr/current)" != "kernel" ]; then
if [ -r "/sys/fs/selinux/enforce" ] ; then
SELINUX_STATE=$(cat "/sys/fs/selinux/enforce")
else
# assume enforcing if you can't read it
SELINUX_STATE=1
fi
fi
if [ -n "$SELINUX_STATE" ] && [ -x /sbin/restorecon ] && __fgrep " /dev " /proc/mounts >/dev/null 2>&1 ; then
/sbin/restorecon -R /dev 2>/dev/null
fi
disable_selinux() {
gprintf "*** Warning -- SELinux is active\n"
gprintf "*** Disabling security enforcement for system recovery.\n"
gprintf "*** Run 'setenforce 1' to reenable.\n"
echo "0" > "/sys/fs/selinux/enforce"
}
relabel_selinux() {
# if /sbin/init is not labeled correctly this process is running in the
# wrong context, so a reboot will be required after relabel
AUTORELABEL=
. /etc/selinux/config
echo "0" > /sys/fs/selinux/enforce
[ -n "$PLYMOUTH" ] && plymouth --hide-splash
if [ "$AUTORELABEL" = "0" ]; then
echo
gprintf "*** Warning -- SELinux %s policy relabel is required. \n" ${SELINUXTYPE}
gprintf "*** /etc/selinux/config indicates you want to manually fix labeling\n"
gprintf "*** problems. Dropping you to a shell; the system will reboot\n"
gprintf "*** when you leave the shell.\n"
sulogin
else
echo
gprintf "*** Warning -- SELinux %s policy relabel is required.\n" ${SELINUXTYPE}
gprintf "*** Relabeling could take a very long time, depending on file\n"
gprintf "*** system size and speed of hard drives.\n"
/sbin/fixfiles -F restore > /dev/null 2>&1
fi
rm -f /.autorelabel
gprintf "Unmounting file systems\n"
umount -a
mount -n -o remount,ro /
gprintf "Automatic reboot in progress.\n"
reboot -f
}
# Print a text banner.
# C-like escape sequences don't work as 2nd and up parameters of gprintf,
# so real escap chars were written
PRODUCT=`sed "s/.*release \([0-9.]*\).*/\1/g" /etc/release 2> /dev/null`
SYSTEM=${SYSTEM="Mandriva"}
if [ -r /etc/sysconfig/oem ]; then
. /etc/sysconfig/oem
fi
if [ "$BOOTUP" != "serial" ]; then
gprintf "\t\t\tWelcome to %s" "`echo -en '\\033[1;36m'`$SYSTEM`echo -en '\\033[0;39m'` $PRODUCT"
else
gprintf "\t\t\tWelcome to %s" "$SYSTEM $PRODUCT"
fi
echo -en "\r"
echo
if [ "$PROMPT" != "no" ]; then
gprintf "\t\tPress 'I' to enter interactive startup."
echo
fi
# Fix console loglevel
if [ -n "$LOGLEVEL" ]; then
/bin/dmesg -n $LOGLEVEL
fi
initsplash 5
rc_splash start 1
# Initialize hardware
if [ -f /proc/sys/kernel/modprobe ]; then
if ! strstr "$cmdline" nomodules && [ -f /proc/modules ] ; then
sysctl -w kernel.modprobe="/sbin/modprobe" >/dev/null 2>&1
else
# We used to set this to NULL, but that causes 'failed to exec' messages"
sysctl -w kernel.modprobe="/bin/true" >/dev/null 2>&1
fi
fi
touch /dev/.in_sysinit >/dev/null 2>&1
# Set default affinity
if [ -x /bin/taskset ]; then
if strstr "$cmdline" default_affinity= ; then
for arg in $cmdline ; do
if [ "${arg##default_affinity=}" != "${arg}" ]; then
/bin/taskset -p ${arg##default_affinity=} 1
fi
done
fi
fi
nashpid=$(pidof nash 2>/dev/null)
[ -n "$nashpid" ] && kill $nashpid >/dev/null 2>&1
unset nashpid
if [ "x$SPEEDBOOT" != "xyes" ]; then
action "Starting udev: " /sbin/udevd --daemon
/sbin/udevadm trigger --type=subsystems --action=add
/sbin/udevadm trigger --type=devices --action=add
/sbin/udevadm settle
fi #SPEEDBOOT
# Load other user-defined modules
for file in /etc/sysconfig/modules/*.modules ; do
[ -x $file ] && $file
done
# Load modules (for backward compatibility with VARs)
if [ -f /etc/rc.modules ]; then
if [ "x$SPEEDBOOT" != "xyes" ]; then
/etc/rc.modules
else
ionice -c 3 /etc/rc.modules &
MODULES_PID=$!
fi
fi
mount -n -t devpts -o mode=620 none /dev/pts >/dev/null 2>&1
[ -n "$SELINUX_STATE" ] && restorecon /dev/pts >/dev/null 2>&1
mount -n -t tmpfs none /dev/shm >/dev/null 2>&1
# Configure kernel parameters
update_boot_stage RCkernelparam
apply_sysctl
if [ "x$SPEEDBOOT" != "xyes" ]; then
# If brltty exist start it (after udev so that vcsa device nodes are created)
[ -x /bin/brltty -a "$BRLTTY" != "no" ] && action "Starting braille terminal" /bin/brltty && SPEEDBOOT="DISABLED reason: braille"
fi #SPEEDBOOT
# Set the hostname.
update_boot_stage RChostname
action "Setting hostname %s: " ${HOSTNAME} hostname ${HOSTNAME}
# Set the NIS domain name
if [ -n "$NISDOMAIN" ]; then
action "Setting NIS domain name %s: " $NISDOMAIN nisdomainname $NISDOMAIN
fi
if [ "x$SPEEDBOOT" != "xyes" ]; then
# Now that we load only one scsi_hostadapter in the initrd, we
# need to load the others here
modprobe scsi_hostadapter >/dev/null 2>&1
# Now that we use modular IDE, we need to do the same for IDE controllers
modprobe ide-controller >/dev/null 2>&1
# Sync waiting for storage.
{ rmmod scsi_wait_scan ; modprobe scsi_wait_scan ; rmmod scsi_wait_scan ; } >/dev/null 2>&1
# Start any MD RAID arrays that haven't been started yet
if [ -f /etc/mdadm.conf -a -x /sbin/mdadm ]; then
MDADM_RETURN=`/sbin/mdadm -As --auto=yes --run 2>&1`
RETVAL=$?
if [ $RETVAL -gt 0 ]; then
echo $MDADM_RETURN | grep -q 'No arrays found in config file'
RETVAL=$?
# only enable speedboot if no array is configured
if [ $RETVAL -gt 0 ]; then
SPEEDBOOT="DISABLED: reason:MD RAID"
fi
else # MD RAID arrays detected, better to disable speedboot
SPEEDBOOT="DISABLED: reason:MD RAID"
fi
fi
fi #SPEEDBOOT
# Device mapper & related initialization
if ! __fgrep "device-mapper" /proc/devices >/dev/null 2>&1 ; then
modprobe dm-mod >/dev/null 2>&1
fi
if [ "x$SPEEDBOOT" != "xyes" ]; then
if [ -f /etc/crypttab ]; then
init_crypto 0
fi
if ! strstr "$cmdline" nompath && [ -f /etc/multipath.conf ] && \
[ -x /sbin/multipath ]; then
modprobe dm-multipath > /dev/null 2>&1
/sbin/multipath -v 0
if [ -x /sbin/kpartx ]; then
/sbin/dmsetup ls --target multipath --exec "/sbin/kpartx -a -p p" >/dev/null
fi
fi
if ! strstr "$cmdline" nodmraid && [ -x /sbin/dmraid ]; then
modprobe dm-mirror >/dev/null 2>&1
dmraidsets=$(LC_ALL=C /sbin/dmraid -s -c -i)
if [ "$dmraidsets" != "no raid disks" -a "$dmraidsets" != "no block devices found" ]; then
for dmname in $dmraidsets; do
if [[ "$dmname" =~ '^isw_.*' ]] && \
! strstr "$cmdline" noiswmd; then
continue
fi
/sbin/dmraid -ay -i --rm_partitions -p "$dmname" >/dev/null 2>&1
/sbin/kpartx -a -p p "/dev/mapper/$dmname"
SPEEDBOOT="DISABLED reason:dmraid"
done
fi
fi
fi #SPEEDBOOT
# Start any MD RAID arrays that haven't been started yet
[ -r /proc/mdstat ] && [ -r /dev/md/md-device-map ] && /sbin/mdadm -IRs
if [ -x /sbin/lvm ]; then
action "Setting up Logical Volume Management:" /sbin/lvm vgchange -a y --ignorelockingfailure
fi
if [ "x$SPEEDBOOT" != "xyes" ]; then
if [ -f /etc/crypttab ]; then
init_crypto 0
fi
fi #SPEEDBOOT
if strstr "$cmdline" fastboot || [ -f /fastboot ]; then
fastboot=yes
fi
if [ -f /fsckoptions ]; then
fsckoptions=$(cat /fsckoptions)
fi
# (blino) always source autofsck settings, for AUTOFSCK_CRYPTO_TIMEOUT (#16029)
[ -f /etc/sysconfig/autofsck ] && . /etc/sysconfig/autofsck
if strstr "$cmdline" forcefsck || [ -f /forcefsck ]; then
fsckoptions="-f $fsckoptions"
elif [ -f /.autofsck ]; then
if [ "$AUTOFSCK_DEF_CHECK" = "yes" ]; then
AUTOFSCK_OPT="$AUTOFSCK_OPT -f"
fi
if [ -n "$AUTOFSCK_SINGLEUSER" ]; then
[ -n "$PLYMOUTH" ] && plymouth --hide-splash
rc_splash verbose
echo
gprintf "*** Warning -- the system did not shut down cleanly. \n"
gprintf "*** Dropping you to a shell; the system will continue\n"
gprintf "*** when you leave the shell.\n"
[ -n "$SELINUX_STATE" ] && echo "0" > /sys/fs/selinux/enforce
sulogin
[ -n "$SELINUX_STATE" ] && echo "1" > /sys/fs/selinux/enforce
[ -n "$PLYMOUTH" ] && plymouth --show-splash
fi
fsckoptions="$AUTOFSCK_OPT $fsckoptions"
fi
if [ "$BOOTUP" = "color" ]; then
fsckoptions="-C $fsckoptions"
else
fsckoptions="-V $fsckoptions"
fi
READONLY=
if [ -f /etc/sysconfig/readonly-root ]; then
. /etc/sysconfig/readonly-root
fi
if strstr "$cmdline" readonlyroot ; then
READONLY=yes
[ -z "$RW_MOUNT" ] && RW_MOUNT=/var/lib/stateless/writable
[ -z "$STATE_MOUNT" ] && STATE_MOUNT=/var/lib/stateless/state
fi
if strstr "$cmdline" noreadonlyroot ; then
READONLY=no
fi
if [ "$READONLY" = "yes" -o "$TEMPORARY_STATE" = "yes" ]; then
mount_empty() {
if [ -e "$1" ]; then
echo "$1" | cpio -p -vd "$RW_MOUNT" &>/dev/null
mount -n --bind "$RW_MOUNT$1" "$1"
fi
}
mount_dirs() {
if [ -e "$1" ]; then
mkdir -p "$RW_MOUNT$1"
find "$1" -type d -print0 | cpio -p -0vd "$RW_MOUNT" &>/dev/null
mount -n --bind "$RW_MOUNT$1" "$1"
fi
}
mount_files() {
if [ -e "$1" ]; then
cp -a --parents "$1" "$RW_MOUNT"
mount -n --bind "$RW_MOUNT$1" "$1"
fi
}
# Common mount options for scratch space regardless of
# type of backing store
mountopts=
# Scan partitions for local scratch storage
rw_mount_dev=$(blkid -t LABEL="$RW_LABEL" -l -o device)
# First try to mount scratch storage from /etc/fstab, then any
# partition with the proper label. If either succeeds, be sure
# to wipe the scratch storage clean. If both fail, then mount
# scratch storage via tmpfs.
if mount $mountopts "$RW_MOUNT" > /dev/null 2>&1 ; then
rm -rf "$RW_MOUNT" > /dev/null 2>&1
elif [ x$rw_mount_dev != x ] && mount $rw_mount_dev $mountopts "$RW_MOUNT" > /dev/null 2>&1; then
rm -rf "$RW_MOUNT" > /dev/null 2>&1
else
mount -n -t tmpfs $RW_OPTIONS $mountopts none "$RW_MOUNT"
fi
for file in /etc/rwtab /etc/rwtab.d/* /dev/.initramfs/rwtab ; do
is_ignored_file "$file" && continue
[ -f $file ] && cat $file | while read type path ; do
case "$type" in
empty)
mount_empty $path
;;
files)
mount_files $path
;;
dirs)
mount_dirs $path
;;
*)
;;
esac
[ -n "$SELINUX_STATE" ] && [ -e "$path" ] && restorecon -R "$path"
done
done
# Use any state passed by initramfs
[ -d /dev/.initramfs/state ] && cp -a /dev/.initramfs/state/* $RW_MOUNT
# In theory there should be no more than one network interface active
# this early in the boot process -- the one we're booting from.
# Use the network address to set the hostname of the client. This
# must be done even if we have local storage.
ipaddr=
if [ "$HOSTNAME" = "localhost" -o "$HOSTNAME" = "localhost.localdomain" ]; then
ipaddr=$(ip addr show to 0.0.0.0/0 scope global | awk '/[[:space:]]inet / { print gensub("/.*","","g",$2) }')
for ip in $ipaddr ; do
HOSTNAME=
eval $(ipcalc -h $ip 2>/dev/null)
[ -n "$HOSTNAME" ] && { hostname ${HOSTNAME} ; break; }
done
fi
# Clients with read-only root filesystems may be provided with a
# place where they can place minimal amounts of persistent
# state. SSH keys or puppet certificates for example.
#
# Ideally we'll use puppet to manage the state directory and to
# create the bind mounts. However, until that's all ready this
# is sufficient to build a working system.
# First try to mount persistent data from /etc/fstab, then any
# partition with the proper label, then fallback to NFS
state_mount_dev=$(blkid -t LABEL="$STATE_LABEL" -l -o device)
if mount $mountopts $STATE_OPTIONS "$STATE_MOUNT" > /dev/null 2>&1 ; then
/bin/true
elif [ x$state_mount_dev != x ] && mount $state_mount_dev $mountopts "$STATE_MOUNT" > /dev/null 2>&1; then
/bin/true
elif [ ! -z "$CLIENTSTATE" ]; then
# No local storage was found. Make a final attempt to find
# state on an NFS server.
mount -t nfs $CLIENTSTATE/$HOSTNAME $STATE_MOUNT -o rw,nolock
fi
if [ -w "$STATE_MOUNT" ]; then
mount_state() {
if [ -e "$1" ]; then
[ ! -e "$STATE_MOUNT$1" ] && cp -a --parents "$1" "$STATE_MOUNT"
mount -n --bind "$STATE_MOUNT$1" "$1"
fi
}
for file in /etc/statetab /etc/statetab.d/* ; do
is_ignored_file "$file" && continue
[ ! -f "$file" ] && continue
if [ -f "$STATE_MOUNT/$file" ] ; then
mount -n --bind "$STATE_MOUNT/$file" "$file"
fi
for path in $(grep -v "^#" "$file" 2>/dev/null); do
mount_state "$path"
[ -n "$SELINUX_STATE" ] && [ -e "$path" ] && restorecon -R "$path"
done
done
if [ -f "$STATE_MOUNT/files" ] ; then
for path in $(grep -v "^#" "$STATE_MOUNT/files" 2>/dev/null); do
mount_state "$path"
[ -n "$SELINUX_STATE" ] && [ -e "$path" ] && restorecon -R "$path"
done
fi
fi
fi
if [[ " $fsckoptions" != *" -y"* ]]; then
fsckoptions="-a $fsckoptions"
fi
_RUN_QUOTACHECK=0
if strstr "$cmdline" forcequotacheck || [ -f /forcequotacheck ] ; then
_RUN_QUOTACHECK=1
fi
Fsck()
{
fsck $*
rc=$?
if [ "$rc" -eq "0" ]; then
echo_success
echo
elif [ "$rc" -eq "1" ]; then
echo_passed
echo
_RUN_QUOTACHECK=1
elif [ "$rc" -eq "2" -o "$rc" -eq "3" ]; then
gprintf "Unmounting file systems\n"
umount -a
mount -n -o remount,ro /
gprintf "Automatic reboot in progress.\n"
reboot -f
elif [ $((rc & 4)) = 4 ]; then
# Return code is a or between return codes for the filesystems
# 4 means that a filesystem remains corrupted
rc_splash verbose
echo_failure
echo
echo
gprintf "*** An error occurred during the file system check.\n"
gprintf "*** Dropping you to a shell; the system will reboot\n"
gprintf "*** when you leave the shell.\n"
str=`gprintf "(Repair filesystem)"`
PS1="$str \# # "; export PS1
[ "$SELINUX_STATE" = "1" ] && disable_selinux
sulogin
gprintf "Unmounting file systems\n"
umount -a
mount -n -o remount,ro /
gprintf "Automatic reboot in progress.\n"
reboot -f
else
echo_failure
echo
gprintf "*** A non fatal error occurred during the file system check.\n"
fi
}
remount_needed() {
local state oldifs
[ "$READONLY" = "yes" ] && return 1
state=$(LC_ALL=C awk '/ \/ / && ($3 !~ /rootfs/) { print $4 }' /proc/mounts)
oldifs=$IFS
IFS=","
for opt in $state ; do
if [ "$opt" = "rw" ]; then
IFS=$oldifs
return 1
fi
done
IFS=$oldifs
return 0
}
if [ "x$SPEEDBOOT" = "xyes" ]; then
wait $UDEV_DISK_PID
fi
# do not check / if already rw (for example with unionfs)
if [ -z "$fastboot" -a "$READONLY" != "yes" ] && remount_needed; then
gprintf "Checking root filesystem\n"
Fsck -T -a $fsckoptions /
fi
_RUN_QUOTACHECK=0
# Remount the root filesystem read-write.
update_boot_stage RCmountfs
if remount_needed ; then
action "Remounting root filesystem in read-write mode: " mount -n -o remount,rw /
fi
# wait for usb storage scanning processes to finish
if ! strstr "$cmdline" nousb; then
LC_ALL=C grep '08' /sys/bus/usb/devices/*/bInterfaceClass >/dev/null 2>&1
RETVAL=$?
if [ $RETVAL -eq 0 ]; then
countdown=20
until [ -d /sys/module/usb_storage -o $countdown -eq 0 ]; do
usleep 100000; let countdown=$countdown-1;
done
while ps -eocomm | grep -q usb-stor-scan; do
sleep 1;
done
fi
fi
if [ "x$SPEEDBOOT" != "xyes" ]; then
# Clean up SELinux labels
if [ -n "$SELINUX_STATE" ]; then
restorecon /etc/mtab /etc/ld.so.cache /etc/blkid/blkid.tab /etc/resolv.conf >/dev/null 2>&1
SPEEDBOOT="DISABLED reason: SELinux"
fi
[ -x /sbin/hibernate-cleanup.sh ] && /sbin/hibernate-cleanup.sh start
# If relabeling, relabel mount points.
if [ -n "$SELINUX_STATE" -a "$READONLY" != "yes" ]; then
if strstr "$cmdline" autorelabel || [ -f /.autorelabel ] ; then
restorecon $(awk '!/^#/ && $4 !~ /noauto/ && $2 ~ /^\// { print $2 }' /etc/fstab) >/dev/null 2>&1
fi
fi
fi
if [ "$READONLY" != "yes" ] ; then
# Clear mtab
(> /etc/mtab) &> /dev/null
# Remove stale backups
rm -f /etc/mtab~ /etc/mtab~~
# Enter mounted filesystems into /etc/mtab
mount -f /
mount -f /proc >/dev/null 2>&1
mount -f /sys >/dev/null 2>&1
mount -f /dev/pts >/dev/null 2>&1
mount -f /dev/shm >/dev/null 2>&1
mount -f /proc/bus/usb >/dev/null 2>&1
fi
# (pixel) also added /initrd/loopfs for loopback root
mount -f /initrd/loopfs 2>/dev/null
if [ -x /sbin/isapnp -a -f /etc/isapnp.conf -a ! -f /proc/isapnp ]; then
# check for arguments passed from kernel
if ! strstr "$cmdline" nopnp ; then
PNP=yes
fi
if [ -n "$PNP" ]; then
action "Setting up ISA PNP devices: " /sbin/isapnp /etc/isapnp.conf
else
action "Skipping ISA PNP configuration at users request: " /bin/true
fi
fi
# tweak isapnp settings if needed.
if [ -n "$PNP" -a -f /proc/isapnp -a -x /sbin/sndconfig ]; then
/sbin/sndconfig --mungepnp >/dev/null 2>&1
fi
# Check filesystems
# (pixel) do not check loopback files, will be done later (aren't available yet)
if [ -z "$fastboot" ]; then
gprintf "Checking filesystems\n"
Fsck -T -R -A -a -t noopts=loop $fsckoptions
fi
# Mount all other filesystems (except for network bases filesystems and /proc, which is already
# mounted). Contrary to standard usage,
# filesystems are NOT unmounted in single user mode.
# (pixel) also do not mount loopback and encrypted filesystems
# will be done later
(
# export locales (needed by mount.ntfs-3g)
export LC_ALL
export LANG
# The 'no' applies to all listed filesystem types. See mount(8).
if [ "$READONLY" != "yes" ] ; then
action "Mounting local filesystems: " mount -a -t nodevpts,nonfs,nfs4,smbfs,ncpfs,cifs,gfs,gfs2 -O no_netdev,noloop,noencrypted
else
action "Mounting local filesystems: " mount -a -n -t nodevpts,nonfs,nfs4,smbfs,ncpfs,cifs,gfs,gfs2 -O no_netdev,noloop,noencrypted
fi
)
if [ "x$SPEEDBOOT" != "xyes" ]; then
[[ -z $AUTOFSCK_CRYPTO_TIMEOUT ]] && AUTOFSCK_CRYPTO_TIMEOUT=15
#Mounting Encrypted filesystem
encrypted_swap=
if [[ ! -f /fastboot ]];then
encrypted=
while read -a entry;do
device=${entry[0]}
mountpoint=${entry[1]}
options=${entry[3]}
type=${entry[2]}
if [[ $options == *encryption=* || $options == *encrypted* ]];then
[[ $options == *noauto* ]] && continue
if [[ $type == *swap* ]];then
encrypted_swap="$encrypted_swap $device"
continue
fi
encrypted="$encrypted $mountpoint"
fi
done < /etc/fstab
if [[ -n $encrypted ]];then
modprobe cryptoloop
rc_splash verbose
echo "We have discovered Encrypted filesystems, do you want to mount them now ?"
MSG=`gprintf "Press Y within %%d seconds to mount your encrypted filesystems..."`
KEYS=`gprintf "yY"`
if /sbin/getkey -c $AUTOFSCK_CRYPTO_TIMEOUT -m "$MSG" "$KEYS"; then
echo -e '\n'
for i in ${encrypted};do
echo -n "${i} "; mount ${i}
done
else
echo -e '\n'
fi
fi
fi
# (pixel) Check loopback filesystems
if [ ! -f /fastboot ]; then
modprobe loop
gprintf "Checking loopback filesystems"
Fsck -T -R -A -a -t opts=loop $fsckoptions
fi
fi #SPEEDBOOT
# Mount loopback
action "Mounting loopback filesystems: " mount -a -O loop
# Update quotas if necessary
if [ X"$_RUN_QUOTACHECK" = X1 ] && [ -x /sbin/quotacheck ]; then
action "Checking local filesystem quotas: " /sbin/quotacheck -anug
fi
if [ -x /sbin/quotaon ]; then
action "Turning on user and group quotas for local filesystems: " /sbin/quotaon -aug
fi
if [ "x$SPEEDBOOT" != "xyes" ]; then
# Check to see if a full relabel is needed
if [ -n "$SELINUX_STATE" -a "$READONLY" != "yes" ]; then
if strstr "$cmdline" autorelabel || [ -f /.autorelabel ] ; then
relabel_selinux
fi
else
if [ "$READONLY" != "yes" ] && [ -d /etc/selinux ]; then
[ -f /.autorelabel ] || touch /.autorelabel
fi
fi
fi #SPEEDBOOT
# Initialize pseudo-random number generator
if [ -f "/var/lib/random-seed" ]; then
cat /var/lib/random-seed > /dev/urandom
else
[ "$READONLY" != "yes" ] && touch /var/lib/random-seed
fi
if [ "$READONLY" != "yes" ]; then
chmod 600 /var/lib/random-seed
dd if=/dev/urandom of=/var/lib/random-seed count=1 bs=512 2>/dev/null
fi
if [ "x$SPEEDBOOT" != "xyes" ]; then
if [ -f /etc/crypttab ]; then
init_crypto 1
SPEEDBOOT="DISABLED reason: crypto FS"
fi
# Configure machine if necessary.
if [ -f /.unconfigured ]; then
if [ -x /bin/plymouth ]; then
/bin/plymouth quit
fi
if [ -x /usr/bin/system-config-keyboard ]; then
/usr/bin/system-config-keyboard
fi
if [ -x /usr/bin/passwd ]; then
/usr/bin/passwd root
fi
if [ -x /usr/sbin/system-config-network-tui ]; then
/usr/sbin/system-config-network-tui
fi
if [ -x /usr/sbin/timeconfig ]; then
/usr/sbin/timeconfig
fi
if [ -x /usr/sbin/authconfig-tui ]; then
/usr/sbin/authconfig-tui --nostart
fi
if [ -x /usr/sbin/ntsysv ]; then
/usr/sbin/ntsysv --level 35
fi
# Reread in network configuration data.
if [ -f /etc/sysconfig/network ]; then
. /etc/sysconfig/network
# Reset the hostname.
action "Resetting hostname %s: " ${HOSTNAME} hostname ${HOSTNAME}
# Reset the NIS domain name.
if [ -n "$NISDOMAIN" ]; then
action "Resetting NIS domain name %s: " $NISDOMAIN nisdomainname $NISDOMAIN
fi
fi
rm -f /.unconfigured
fi
fi
# Clean out /.
rm -f /fastboot /fsckoptions /forcefsck /.autofsck /forcequotacheck /halt \
/poweroff /.suspended /etc/killpower &> /dev/null
# Do we need (w|u)tmpx files? We don't set them up, but the sysadmin might...
_NEED_XFILES=
[ -f /var/run/utmpx ] || [ -f /var/log/wtmpx ] && _NEED_XFILES=1
# Clean up /var.
rm -rf /var/lock/cvs/* /var/run/screen/*
find /var/lock /var/run ! -type d ! -path '/var/lock/TMP_1ST' -exec rm -f {} \;
if [ "x$SPEEDBOOT" = "xyes" ]; then
wait $MODULES_PID
wait $UDEV_PID
/etc/rc.d/rc S &
RC_PID=$!
fi
{
# Clean up utmp/wtmp
> /var/run/utmp
touch /var/log/wtmp /var/log/btmp
chgrp utmp /var/run/utmp /var/log/wtmp /var/log/btmp
chmod 0664 /var/run/utmp /var/log/wtmp
chmod 0600 /var/log/btmp
if [ -n "$_NEED_XFILES" ]; then
> /var/run/utmpx
touch /var/log/wtmpx
chgrp utmp /var/run/utmpx /var/log/wtmpx
chmod 0664 /var/run/utmpx /var/log/wtmpx
fi
[ -n "$SELINUX_STATE" ] && restorecon /var/run/utmp* /var/log/wtmp* /var/log/btmp >/dev/null 2>&1
# Clean up various /tmp bits
[ -n "$SELINUX_STATE" ] && restorecon /tmp
rm -f /tmp/.X*-lock /tmp/.lock.* /tmp/.s.PGSQL.*
rm -rf /tmp/.X*-unix /tmp/.ICE-unix /tmp/.font-unix /tmp/hsperfdata_* \
/tmp/kde-* /tmp/ksocket-* /tmp/mc-* /tmp/mcop-* /tmp/orbit-* \
/tmp/ssh-* /tmp/.fam_socket /tmp/.esd /tmp/.esd-* \
/tmp/pulse-* /tmp/.sawfish-* /tmp/esrv* /tmp/kio* \
/var/lib/gdm/core.*
# Make ICE directory
mkdir -m 1777 -p /tmp/.ICE-unix >/dev/null 2>&1
chown root:root /tmp/.ICE-unix
[ -n "$SELINUX_STATE" ] && restorecon /tmp/.ICE-unix >/dev/null 2>&1
# Start up swapping.
update_boot_stage RCswap
action "Enabling /etc/fstab swaps: " swapon -a -e 2>/dev/null
if [ "$AUTOSWAP" = "yes" ]; then
curswap=$(awk '/^\/dev/ { print $1 }' /proc/swaps | while read x; do get_numeric_dev dec $x ; echo -n " "; done)
swappartitions=$(blkid -t TYPE=swap -o device)
if [ x"$swappartitions" != x ]; then
for partition in $swappartitions ; do
[ ! -e $partition ] && continue
majmin=$(get_numeric_dev dec $partition)
echo $curswap | grep -qw "$majmin" || action "Enabling local swap partitions: " swapon $partition
done
fi
fi
# Set up binfmt_misc
/bin/mount -t binfmt_misc none /proc/sys/fs/binfmt_misc > /dev/null 2>&1
# Boot time profiles. Yes, this should be somewhere else.
if strstr "$cmdline" netprofile= && [ -x /usr/sbin/system-config-network-cmd ]; then
for arg in $cmdline ; do
if [ "${arg##netprofile=}" != "${arg}" ]; then
/usr/sbin/system-config-network-cmd --profile ${arg##netprofile=}
fi
done
fi
(
# Now turn on swap in case we swap to files.
action "Enabling swap space: " swapon -a -e
if [ "x$SPEEDBOOT" != "xyes" ]; then
# If a SCSI tape has been detected, load the st module unconditionally
# since many SCSI tapes don't deal well with st being loaded and unloaded
if [ -n "$USEMODULES" -a -f /proc/scsi/scsi ] && LC_ALL=C grep -q 'Type: Sequential-Access' /proc/scsi/scsi 2>/dev/null ; then
LC_ALL=C fgrep -q ' 9 st' /proc/devices || modprobe st >/dev/null 2>&1
SPEEDBOOT="DISABLED reason: SCSI tape"
fi
fi #SPEEDBOOT
(
# Turn on harddisk optimization
# There is only one file /etc/sysconfig/harddisks for all disks
# after installing the hdparm-RPM. If you need different hdparm parameters
# for each of your disks, copy /etc/sysconfig/harddisks to
# /etc/sysconfig/harddiskhda (hdb, hdc...) and modify it.
# Each disk which has no special parameters will use the defaults.
# Each non-disk which has no special parameters will be ignored.
#
disk[0]=s;
disk[1]=hda; disk[2]=hdb; disk[3]=hdc; disk[4]=hdd;
disk[5]=hde; disk[6]=hdf; disk[7]=hdg; disk[8]=hdh;
disk[9]=hdi; disk[10]=hdj; disk[11]=hdk; disk[12]=hdl;
disk[13]=hdm; disk[14]=hdn; disk[15]=hdo; disk[16]=hdp;
disk[17]=hdq; disk[18]=hdr; disk[19]=hds; disk[20]=hdt;
disk[21]=sda; disk[22]=sdb; disk[23]=sdc; disk[24]=sdd;
disk[25]=sde; disk[26]=sdf; disk[27]=sdg; disk[28]=sdh;
disk[29]=sr0; disk[30]=sr1; disk[31]=sr2; disk[32]=sr3;
disk[33]=scd0; disk[34]=scd1; disk[35]=scd2; disk[36]=scd3;
disk[37]=sg0; disk[38]=sg1; disk[39]=sg2; disk[40]=sg3;
# Skip hard disks optimization if software RAID arrays are currently
# resyncing and disks heavily active, because hdparm might hang and
# lock system startup in such situation
if [ ! -f /proc/mdstat ] || ! /bin/egrep -qi "re(cover|sync)|syncing" /proc/mdstat; then
if [ -x /sbin/hdparm ]; then
for device in {0..40}; do
unset MULTIPLE_IO USE_DMA EIDE_32BIT LOOKAHEAD EXTRA_PARAMS
if [ -f /etc/sysconfig/harddisk${disk[$device]} ]; then
. /etc/sysconfig/harddisk${disk[$device]}
HDFLAGS[$device]=
if [ -n "$MULTIPLE_IO" ]; then
HDFLAGS[$device]="-q -m$MULTIPLE_IO"
fi
if [ -n "$USE_DMA" ]; then
HDFLAGS[$device]="${HDFLAGS[$device]} -q -d$USE_DMA"
fi
if [ -n "$EIDE_32BIT" ]; then
HDFLAGS[$device]="${HDFLAGS[$device]} -q -c$EIDE_32BIT"
fi
if [ -n "$LOOKAHEAD" ]; then
HDFLAGS[$device]="${HDFLAGS[$device]} -q -A$LOOKAHEAD"
fi
if [ -n "$EXTRA_PARAMS" ]; then
HDFLAGS[$device]="${HDFLAGS[$device]} $EXTRA_PARAMS"
fi
else
HDFLAGS[$device]="${HDFLAGS[0]}"
fi
if [ -e "/proc/ide/${disk[$device]}/media" -o -e "/sys/block/${disk[$device]}/device/vendor" ]; then
if [ -e "/proc/ide/${disk[$device]}/media" ]; then
hdmedia=`cat /proc/ide/${disk[$device]}/media`
else
hdmedia=`cat /sys/block/${disk[$device]}/device/vendor`
fi
if [ "$hdmedia" = "disk" -o "$vendor" = "ATA" -o -f "/etc/sysconfig/harddisk${disk[$device]}" ]; then
if [ -n "${HDFLAGS[$device]}" ]; then
sleep 2
action "Setting hard drive parameters for %s: " ${disk[$device]} /sbin/hdparm ${HDFLAGS[$device]} /dev/${disk[$device]}
fi
fi
fi
done
fi
else
action "RAID Arrays are resyncing. Skipping hard drive parameters section." /bin/true
fi
) &
# Adjust symlinks as necessary in /boot to keep system services from
# spewing messages about mismatched System maps and so on.
if [ -L /boot/System.map -a -r /boot/System.map-$uname_r -a \
! /boot/System.map -ef /boot/System.map-$uname_r ] ; then
ln -s -f System.map-$uname_r /boot/System.map 2>/dev/null
fi
if [ ! -e /boot/System.map -a -r /boot/System.map-$uname_r ] ; then
ln -s -f System.map-$uname_r /boot/System.map 2>/dev/null
fi
# Adjust symlinks as necessary in /boot to have the default config
if [ -L /boot/config -a -r /boot/config-$uname_r ] ; then
ln -sf config-$uname_r /boot/config 2>/dev/null
fi
if [ ! -e /boot/config -a -r /boot/config-$uname_r ] ; then
ln -sf config-$uname_r /boot/config 2>/dev/null
fi
# Now that we have all of our basic modules loaded and the kernel going,
# let's dump the syslog ring somewhere so we can find it later
[ -f /var/log/dmesg ] && mv -f /var/log/dmesg /var/log/dmesg.old
dmesg -s 131072 > /var/log/dmesg
) &
# create the crash indicator flag to warn on crashes, offer fsck with timeout
touch /.autofsck &> /dev/null
if [ "$PROMPT" != no ]; then
while :; do
pid=$(/sbin/pidof getkey)
[ -n "$pid" -o -e /var/run/getkey_done ] && break
usleep 100000
done
[ -n "$pid" ] && kill -TERM "$pid" >/dev/null 2>&1
fi
} &
if strstr "$cmdline" confirm ; then
touch /var/run/confirm
fi
if [ "x$SPEEDBOOT" != "xyes" ]; then
if [ "$PROMPT" != "no" ]; then
/sbin/getkey i && touch /var/run/confirm
touch /var/run/getkey_done
fi
wait
[ "$PROMPT" != no ] && rm -f /var/run/getkey_done
fi
if strstr "$cmdline" failsafe; then
touch /var/run/failsafe
fi
if [ -f /var/lock/TMP_1ST ];then
if [ -f /etc/init.d/mandrake_firstime ];then
/bin/sh /etc/init.d/mandrake_firstime
fi
fi
if [ "x$SPEEDBOOT" = "xyes" ]; then
if [ ! -f /.readahead_collect -a -x /sbin/readahead_later ]; then
/sbin/readahead_later > /dev/null 2>&1
fi
wait $RC_PID
countdown=10
until [ -e /tmp/.X11-unix/X0 -o $countdown -eq 0 ]; do
sleep 1; let countdown=$countdown-1;
done
/sbin/udevadm trigger --action=add --subsystem-nomatch=tty --subsystem-nomatch=block --subsystem-nomatch=mem --subsystem-nomatch=input --subsystem-nomatch=acpi --subsystem-nomatch=rtc --subsystem-nomatch=hid
/sbin/udevadm settle --timeout=5 > /dev/null 2>&1
/sbin/udevadm control --env=STARTUP=
mount -n -t usbfs -o devmode=0664,devgid=43 /proc/bus/usb /proc/bus/usb
# (anssi) at this point plymouth should have quit, reopen descriptors to
# ensure that the output of the rest of this script is seen if the user is
# not in X11
exec 0<>/proc/self/fd/0 1<>/proc/self/fd/1 2<>/proc/self/fd/2
fi
if [ -f /etc/init.d/mandrake_everytime ]; then
/bin/sh /etc/init.d/mandrake_everytime
fi
if [ "x$SPEEDBOOT_PROBE" = "xyes" ]; then
sed -i -e "/$uname_r .*/d" /var/lib/speedboot/status 2>/dev/null
unset SPEEDBOOT_PROBE
fi
if [ "x$SPEEDBOOT" = "xyes" -a ! -e /tmp/.X11-unix/X0 ]; then
/etc/init.d/dm stop
grep -q "$uname_r" /var/lib/speedboot/status 2> /dev/null
RETVAL=$?
if [ $RETVAL -eq 0 ]; then
sed -i -e "s/^$uname_r FAILED (first time)/$uname_r FAILED/g" -e "/FAILED/!s/^$uname_r .*/$uname_r FAILED (first time)/g" /var/lib/speedboot/status
else
echo "$uname_r FAILED (first time)" >> /var/lib/speedboot/status
fi
fi
# system configuration doesn't permit speedboot or speedboot failed, disable it
if strstr "$SPEEDBOOT" DISABLED ; then
grep -q $uname_r /var/lib/speedboot/status 2> /dev/null
RETVAL=$?
if [ $RETVAL -eq 0 ]; then
sed -i -e "s/^$uname_r .*/$uname_r $SPEEDBOOT/g" /var/lib/speedboot/status
else
echo "$uname_r $SPEEDBOOT" >> /var/lib/speedboot/status
fi
fi
unset SPEEDBOOT
# (pixel) a kind of profile for XF86Config
# if no XFree=XXX given on kernel command-line, restore XF86Config.standard
for i in XF86Config XF86Config-4; do
if [ -L "/etc/X11/$i" ]; then
XFree=`sed -n 's/.*XFree=\(\w*\).*/\1/p' /proc/cmdline`
[ -n "$XFree" ] || XFree=standard
[ -r "/etc/X11/$i.$XFree" ] && ln -sf "$i.$XFree" "/etc/X11/$i"
fi
done
# Let rhgb know that we're leaving rc.sysinit
if [ -x /bin/plymouth ]; then
/bin/plymouth --sysinit
fi
# remove this file at the very end, for speedboot
rm -f /dev/.in_sysinit
