Root over nfs clients & server Howto.
Hans de Goede hans@highrise.nl
v1.0 30 March 1999
Howto setup a server and configure clients for diskless operation from
a network.
______________________________________________________________________
Table of Contents
1. Introduction
1.1 Copyright
1.2 Changelog
2. Basic principle
2.1 Things can't be that simple
2.1.1 Each ws needs its own writable copy of a number of dirs
2.1.2 Write access to /home might be needed
2.1.3 How does a ws find out it's ip so that it can communicate with the server?
2.1.4 What about ws sepecific configuration
2.1.5 Miscelancious problems
3. Preparing the server
3.1 Building a kernel
3.2 Creating and populating /tftpboot, making symlinks for /tmp etc.
3.2.1 The automagic part
3.2.2 Manual adjustments to some files
3.3 Exporting the appropriate file systems and setting up bootp
3.3.1 Exporting the appropriate file systems
3.3.2 Setting up bootp
4. Adding workstations
4.1 Creating a boot disk or bootrom
4.1.1 Creating a bootdisk
4.1.2 Creating a bootrom
4.2 Creating a ws dir
4.3 Add entries to /etc/bootptab and /etc/hosts
4.4 Booting the ws for the first time
4.5 Set the ws specific configuration.
5. Added bonus: booting from cdrom
5.1 Basic Principle
5.1.1 Things can't be that simple
5.2 Creating a test setup.
5.3 Creating the cd
5.3.1 Creating a boot image
5.3.2 Creating the iso image
5.3.3 Verifying the iso image
5.3.4 Writing the actual cd
5.4 Boot the cd and test it
6. Thanks
7. Comments
______________________________________________________________________
1. Introduction
This howto is also available at - <http://xmame.retrogames.com/hans>.
This document describes a setup for nfs over root. This document
differs from the other root over nfs howto's in 2 ways:
1. It describes both the server and the client side offering a
complete solution, it doesn't desribe the generic principles off
root over nfs although they will become clear. Instead it offers a
working setup for root over nfs. One of the many possible setup's I
might add.
2. This solution is unique in that it shares the root of the server
with the workstations (ws). Instead of having a mini-root per ws.
This has a number of advantages:
· low diskspace usage
· any changes on the serverside are also automagicly made at the
client side, all configuration has only to be done once!
· Very easy adding of new clients
· only one system to maintain
This document is heavily based on a RedHat-5.2 system. Quite a bit of
prior linux sysadmin experience is assumed in this howto, if you have
that it shouldn't be a problem to addept this solutions to other
distributions.
1.1. Copyright
Well here's the standard howto legal stuff:
This manual may be reproduced and distributed in whole or in part,
without fee, subject to the following conditions:
· The copyright notice above and this permission notice must be
preserved complete on all complete or partial copies.
· Any translation or derived work must be approved by the author in
writing before distribution.
· If you distribute this work in part, instructions for obtaining the
complete version of this manual must be included, and a means for
obtaining a complete version provided.
· Small portions may be reproduced as illustrations for reviews or
quotes in other works without this permission notice if proper
citation is given.
Exceptions to these rules may be granted for academic purposes: Write
to the author and ask. These restrictions are here to protect us as
authors, not to restrict you as learners and educators.
1.2. Changelog
· v0.1, 20 January 1999: First draft written at the HHS, where the
setup was originally developed.
· v1.0, 30 March 1999: First released version partially written in
time of ISM
2. Basic principle
As already said with this setup the clients share basicly the entire
root-fs with the server. But the clients ofcourse only get read access
to it. This is basicly how things work.
2.1. Things can't be that simple
Unfortunatly things aren't that simple, there are a couple of problems
the overcome with this simple setup.
2.1.1. Each ws needs its own writable copy of a number of dirs
A normal linux setup needs to have write access to the following dirs:
1. /dev
2. /var
3. /tmp
There are 3 solutions for this, of which one will only work for /dev:
1. mount a ramdisk and populate it by untarring a tarball, or by
copying a template dir.
· Advantages:
a. It's cleaned up every reboot, which removes tmp files and logs.
Thus it needs no maintaince unlike server sided dirs.
b. It doesn't take up any space on the server, and that it doesn't
generate any network traffic. A ramdisk takes less server and
network resources, and is faster.
· Disadvantages:
a. It takes memory.
b. The logs aren't kept after a reboot, if you really want logging
of all your clients tell syslog to redirect the logging to your
server.
2. create a dir for each ws on the server and mount it rw over nfs.
· Advantages & disadvantages:
a. The above arguments work in reverse for serversided dirs.
3. With kernel 2.2 devfs can be used for /dev, this is a virtual
filesystem ala /proc for /dev.
· Advantages:
a. Devfs takes very little memory when compared to a ramdisk / no
diskspace on the server and is very fast. A normal /dev takes at
least 1.5 mb since the minimal size for a file (and thus for a
device) is 1k, and there are somewhere around 1200 devices. You
can offcourse use a template of a stripped /dev with only the
entries you need to save some space. 1.5 Mb is a lott for a
ramdisk and also isn't nice on a server.
b. Devfs automagicly creates entries for newly added & detected
devices, so no maintainance is needed.
· Disadvantages:
a. Any changes to /dev like creating symlinks for the mouse and
cdrom are lost. Devfs comes with a script called rc.devfs to
save these chances. The script's provided in this howto will
automagicly restore these symlinks settings by calling rc.devfs
If you make any changes to /dev you need to call the rc.devfs
yourself to save them by typing:
/etc/rc.d/rc.devfs save /etc/sysconfig
As you can see, there are a number of ways to solve this problem. For
the rest of this Howto the following choices are assumed:
· For /dev we'll use Devfs
· For /var and /tmp we'll use a shared ramdisk of 1mb. It's shared to
use the space as effeciently as possible. /tmp is replaced by a
symlink to /var/tmp to make the sharing possible.
· Populating the ramdisk with tarballs or template dirs, works
equally well. But with template dirs it's much easier to make
changes, thus we'll use template dirs.
2.1.2. Write access to /home might be needed
Not really a problem in every unix client/server setup /home is
mounted rw from the server so we'll just do that ;)
2.1.3. How does a ws find out it's ip so that it can communicate with
the server?
Luckily for us, this problem has already been solved and the linux
kernel has support for 2 ways of autoconfiguration of the ip-address:
1. RARP
2. Bootp
Rarp is the easiest to setup, bootp is the most flexible. Since most
bootroms only support bootp that's what we'll use.
2.1.4. What about ws sepecific configuration
On redhat most system dependent config files are already in
/etc/sysconfig We'll just move those which aren't there and add
symlinks. Then we mount a seperate /etc/sysconfig on a per ws basis.
This is really the only distribution dependent part on other
distributions you can just create a sysconfig dir, move all config
files which can't be shared there and create symlinks. Also
/etc/rc.d/rc3.d, or symilar on other dists, might need to be different
for the server resp the workstations. Assuming that all ws run the
same services in runlevel 3, we'll just create a seperate 3th runlevel
for the workstations and the server:
1. Create both a /etc/rc.d/rc3.ws and a /etc/rc.d/rc3.server
2. make /etc/rc.d/rc3.d a symlink to /etc/sysconfig/rc3.d
3. make /etc/sysconfig/rc3.d a symlink to the apropiate
/etc/rc.d/rc3.xxx
4. replace S99local in rc3.ws by a link to /etc/sysconfig/rc.local so
that each ws can have it's own rc.local
2.1.5. Miscelancious problems
There are a few problems left:
1. /etc/rc.d/rc.sysinit needs /var, so /var needs to be mounted or
created before /etc/rc.d/rc.sysinit is run. It would also be nice
if the ws-specific /etc/sysconfig is mounted before any initscripts
are run.
· We'll just source a bootup script for the ws in the very top of
/etc/rc.d/rc.sysinit. Note this script will then ofcourse also be
sourced by the server itself on boot, so the script has to detect
this and do nothing on the server.
2. /etc/mtab needs to be writable:
· This is a tricky one, just create a link to /proc/mounts and create
an empty file mounts in /proc so that fsck and mount don't complain
during the initscripts when /proc isn't mounted yet. One note
smb(u)mount doesn't respect mtab being a link and overwrites it.
Thus if you want to use smb(u)mount create wrapper scripts that
restore the symlink.
3. Preparing the server
Now it's time to prepare the server to serve diskless clients.
3.1. Building a kernel
The first thing todo is build a kernel with the nescesarry stuff in to
support root over nfs. Take the following steps to build your kernel:
1. Since we'll be using redhat-5.2 with kernel-2.2 you should asure
yourself that your redhat-5.2 is kernel-2.2 ready. RedHat has got
an excellent howto on this.
2. I use the same kernel for both server and ws, to avoid module
conflicts since they share the same /lib/modules. If this is not
possible in your situation, fake different kernel versions by
editing the version number in the kernel's top makefile. These
different versionsnumbers will avoid any conflicts.
3. Besides the usual stuff the kernel should have the following:
· ext2 compiled in (if used on server, or for both)
· nfs and root-over-nfs compiled in (if used on client or both), to
get the nfs over root option in 2.2 enable ip-autoconfig in the
network options. We'll use bootp as configuration method.
· ws networkcard support compiled in (if used on client or both)
· compile devfs in (required for client, also nice for server)
· anything else you normally use, modules for all other devices used
on either the server or all / some ws etc.
4. The kernel-src needs to be edited to make the default root-over-nfs
mount: /tftpboot/<ip>/root instead of just /tftpboot/<ip>. This is
to get a clean tree in /tftpboot with one dir per ws containing
both the root for it (a link to the actual server root) and any ws
specific dirs.
· For 2.0 This is a define in: "include/linux/nfs_fs.h" called
"NFS_ROOT"
· For 2.2 This is a define in: "fs/nfs/nfsroot.c"
5. Now just compile the kernel as usual, see the kernel-howto.
6. If you don't have /dev/nfsroot yet, create it by typing:
mknod /dev/nfsroot b 0 255.
7. After compiling the kernel set the root to nfsroot by typing:
rdev <path-to-zImage>/zImage /dev/nfsroot
8. Before booting with devfs you need to make a few changes to
/etc/conf.modules, append the contents of the conf.modules in the
devfs documentation to it.
9. Since this new kernel is compiled for autoconfig of ip's it will
try to autoconf the ip of the server during bootup. Which ofcourse
will fail since it gives out the ip's. To avoid a long timeout add:
append="ip=off" To the linux section of /etc/lilo.conf.
10.
Run lilo and boot the new kernel.
11.
Due to devfs you'll have lost all symlinks on the server. With
redhat this is usually /dev/mouse and /dev/cdrom. Recreate these.
If you also used to use special ownerships, chown to appropiate
files in /dev. Now save the /dev settings (in /etc/sysconfig, since
they might be ws specific):
· Copy rc.devfs from the devfs documentation in the kernel source to
/etc/rc.d/rc.devfs and make it executable
· Save the settings by typing:
/etc/rc.d/rc.devfs save /etc/sysconfig
3.2. Creating and populating /tftpboot, making symlinks for /tmp etc.
The next step is to create and populate /tftpboot
3.2.1. The automagic part
This is all handled by a big script since putting a long list of
commands into this howto seemed pretty useless to me. If you want todo
this manual just read the script and type it in as you go ;)
This setup script thus some nasty things like nuke /tmp, temporary
kill syslog, umount /proc. So make sure that noone is using the
machine during this, and that X isn't running. Just making sure your
the only one logged in on a text-console is enough, no need to change
runlevels.
DISCLAIMER: this script has been tested but nevertheless if it messes
up your server your on your own. I can take no responsibility what so
ever. Lett me repeat this howto is only for experienced linux
sysadmins. Also this is script is designed to be run once and I really
mean once. Running it twice will nuke: /etc/fstab,
/etc/X11/XF86Config, /etc/X11/X and /etc/conf.modules.
Now with that said, just cut and paste the script make it executable,
execute it and pray to the holy penguin that it works ;)
______________________________________________________________________
#!/bin/sh
SERVER_NAME=`hostname -s`
###
echo creating /etc/rc.d/rc.ws
#this basicly just echos the entire script ;)
echo "#root on nfs stuff
SERVER=$SERVER_NAME
#we need proc for mtab, route etc
mount -t proc /proc /proc
IP=\`ifconfig eth0|grep inet|cut --field 2 -d ':'|cut --field 1 -d ' '\`
#if the first mount fails we're probably the server, or atleast something is
#pretty wrong, so only do the other stuff if the first mount succeeds
mount \$SERVER:/tftpboot/\$IP/sysconfig /etc/sysconfig -o nolock &&
{
#other mounts
mount \$SERVER:/home /home -o nolock
mount \$SERVER:/ /\$SERVER -o ro,nolock
#/var
echo Creating /var ...
mke2fs -q -i 1024 /dev/ram1 1024
mount /dev/ram1 /var -o defaults,rw
cp -a /tftpboot/var /
#network stuff
. /etc/sysconfig/network
HOSTNAME=\`cat /etc/hosts|grep \$IP|cut --field 2\`
route add default gw \$GATEWAY
ifup lo
}
#restore devfs settings
/etc/rc.d/rc.devfs restore /etc/sysconfig
umount /proc" > /etc/rc.d/rc.ws
###
echo splitting runlevel 3 for the client and server
mv /etc/rc.d/rc3.d /etc/rc.d/rc3.server
cp -a /etc/rc.d/rc3.server /etc/rc.d/rc3.ws
rm /etc/rc.d/rc3.ws/*network
rm /etc/rc.d/rc3.ws/*nfs
rm /etc/rc.d/rc3.ws/*nfsfs
rm /etc/rc.d/rc3.ws/S99local
ln -s /etc/sysconfig/rc.local /etc/rc.d/rc3.ws/S99local
ln -s /etc/rc.d/rc3.server /etc/sysconfig/rc3.d
ln -s /etc/sysconfig/rc3.d /etc/rc.d/rc3.d
###
echo making tmp a link to /var/tmp
rm -fR /tmp
ln -s var/tmp /tmp
###
echo moving various files around and create symlinks for them
echo mtab
/etc/rc.d/init.d/syslog stop
umount /proc
touch /proc/mounts
mount /proc
/etc/rc.d/init.d/syslog start
rm /etc/mtab
ln -s /proc/mounts /etc/mtab
echo fstab
mv /etc/fstab /etc/sysconfig
ln -s sysconfig/fstab /etc/fstab
echo X-config files
mkdir /etc/sysconfig/X11
mv /etc/X11/X /etc/sysconfig/X11
ln -s ../sysconfig/X11/X /etc/X11/X
mv /etc/X11/XF86Config /etc/sysconfig/X11
ln -s ../sysconfig/X11/XF86Config /etc/X11/XF86Config
echo conf.modules
mv /etc/conf.modules /etc/sysconfig
ln -s sysconfig/conf.modules /etc/conf.modules
echo isapnp.conf
mv /etc/isapnp.conf /etc/sysconfig
ln -s sysconfig/isapnp.conf /etc/isapnp.conf
###
echo creating a template dir for the ws directories
echo /tftpboot/template
mkdir /home/tftpboot
ln -s home/tftpboot /tftpboot
mkdir /tftpboot/template
mkdir /$SERVER_NAME
echo root
ln -s / /tftpboot/template/root
echo sysconfig
cp -a /etc/sysconfig /tftpboot/template/sysconfig
rm -fR /tftpboot/template/sysconfig/network-scripts
ln -s /$SERVER_NAME/etc/sysconfig/network-scripts \
/tftpboot/template/sysconfig/network-scripts
echo NETWORKING=yes > /tftpboot/template/sysconfig/network
echo `grep "GATEWAY=" /etc/sysconfig/network` >> /tftpboot/template/sysconfig/network
echo "/dev/nfsroot / nfs defaults 1 1" > /tftpboot/template/sysconfig/fstab
echo "none /proc proc defaults 0 0" >> /tftpboot/template/sysconfig/fstab
echo "#!/bin/sh" > /tftpboot/template/sysconfig/rc.local
chmod 755 /tftpboot/template/sysconfig/rc.local
rm /tftpboot/template/sysconfig/rc3.d
ln -s /etc/rc.d/rc3.ws /tftpboot/template/sysconfig/rc3.d
rm /tftpboot/template/sysconfig/isapnp.conf
echo var
cp -a /var /tftpboot/var
rm -fR /tftpboot/var/lib
ln -s /$SERVER_NAME/var/lib /tftpboot/var/lib
rm -fR /tftpboot/var/catman
ln -s /$SERVER_NAME/var/catman /tftpboot/var/catman
rm -fR /tftpboot/var/log/httpd
rm -f /tftpboot/var/log/samba/*
for i in `find /tftpboot/var/log -type f`; do cat /dev/null > $i; done
rm `find /tftpboot/var/lock -type f`
rm `find /tftpboot/var/run -type f`
echo /sbin/fsck.nfs
echo "#!/bin/sh
exit 0" > /sbin/fsck.nfs
chmod 755 /sbin/fsck.nfs
echo all done
______________________________________________________________________
3.2.2. Manual adjustments to some files
Now we need to make a few manual adjustments to the server:
1. The ws setup script has to be sourced at the very beginning of
rc.sysinit, so add the following lines directly after setting the
PATH:
___________________________________________________________________
#for root over nfs workstations.
/etc/rc.d/rc.ws
___________________________________________________________________
2. Strip /etc/rc.d/rc3.ws to a bare minimum. It might be useful to
create something like rc.local.ws but I'll leave that up to you.
Network and nfsfs are already setup.The following have been already
removed / updated by the automagic script:
· network
· nfsfs
· nfs
· rc.local
3.3. Exporting the appropriate file systems and setting up bootp
The server must ofcourse export the appropriate filesystems and asign
the ip addresses to the clients.
3.3.1. Exporting the appropriate file systems
We need to export some dir's for the workstations so for the situation
here at the university I would add the following to /etc/exports:
______________________________________________________________________
/ *.st.hhs.nl(ro,no_root_squash)
/home *.st.hhs.nl(rw,no_root_squash)
______________________________________________________________________
Ofcourse use the apropriate domain ;) and restart nfs by typing:
/etc/rc.d/init.d/nfs restart
Note for knfsd users: knfsd doesn't allow you to have multiple exports
on one partition with different permissions. Also knfsd doesn't allow
clients to go past partition boundaries for example if a client mounts
/ and /usr is a different partition it won't have access to /usr. Thus
if you use knfsd, at least /home should be on a different partition,
the server prepare script already puts /tftpboot in /home so that
doesn't need a seperate partition. If you've got any other partitions
your clients should have access to export them seperatly and add mount
commands for them to /etc/rc.d/rc.ws.
3.3.2. Setting up bootp
1. If bootp isn't installed yet install it. It comes with RedHat.
2. Edit /etc/inetd.conf and uncomment the line beginning with bootps,
if you want to use a bootprom uncomment tftp while your at it.
3. Restart inetd by typing:
/etc/rc.d/init.d/inetd restart
4. Adding workstations
Now that the server is all done, we can start adding workstations.
4.1. Creating a boot disk or bootrom
You'll need ot create a bootrom and / or a bootdisk to boot your
workstation.
4.1.1. Creating a bootdisk
Even if you wish to use a bootrom its wise to first test with a
bootdisk, to create a boot disk just type:
dd if=/<path-to-zImage>/zImage of=/dev/fd0
4.1.2. Creating a bootrom
There are a few free package's out there to create bootroms:
1. netboot, this is IMHO the most complete free package out there. It
uses standard dos packet drivers so allmost all cards are
supported. One very usefull hint I got on there mailing list was to
pklite the packetdrivers since some commercial drivers are to big
to fit into the bootrom. Netboot's documentation is complete
enough, so I won't waste any time reproducing it here, it should be
more then sufficient to create a bootrom and boot a ws with it.
Netboot's webpage is: http://www.han.de/~gero/netboot/
2. etherboot, this is the other free package out there it has got a
few nice features like dhcp support, but has limited driver support
as it uses its own driver format. I haven't used this so I really
can't give anymore usefull info. Etherboot's webpage is:
http://www.slug.org.au/etherboot/
About the roms themselves. Most cards take ordinary eproms with an 28
pins dip housing. These eproms come in size upto 64kB. For most cards
you'll need 32kB eproms with netboot. Some cards drivers will fit into
16kB but the price difference of the eproms is minimal. These eproms
can be burned with any ordinairy eprom burner.
4.2. Creating a ws dir
Just copy over the template by typing:
cd /tftpbootcp -a template <ip>
You could of course also copy over the dir of a workstation with
identical mouse, graphicscard and monitor and ommit the configuration
in step 5.4.
4.3. Add entries to /etc/bootptab and /etc/hosts
Edit /etc/bootptab and add an entry for your test ws, an example entry
is:
______________________________________________________________________
nfsroot1:hd=/tftpboot:vm=auto:ip=10.0.0.237:\
:ht=ethernet:ha=00201889EE78:\
:bf=bootImage:rp=/tftpboot/10.0.0.237/root
______________________________________________________________________
Replace nfsroot1 by the hostname you want your ws to have. Replace
10.0.0.237 by the ip you want your ws to have (do this twice) and
replace 00201889EE78 by the MAC-ADDRESS of your ws. If you don't know
the MAC-ADDRESS of the ws, just boot it with the just created boot
disk and look for the MAC-ADDRESS in the boot messages. There's a
chance bootpd is already running so just to make sure try to restart
it by typing:
killall -HUP bootpd
Don't worry if it fails, that just means it wasn't running, inetd will
start it when asked too.
4.4. Booting the ws for the first time
Just boot the ws from the bootdisk. This should get you a working ws
in textmode, with the exact same setup as your server except for the
ip-nr and the running services. Even if you want to use a bootprom
it's wise to first test with the bootdisk, if that works you can try
to boot with the bootrom see the bootroms documentation for more info.
4.5. Set the ws specific configuration.
Now it's time to configure any ws specific settings:
1. First off all to get the mouse working, just run mouseconfig. To
apply the changes, and check that the mouse works type:
/etc/rc.d/init.d restart
2. Run Xconfigurator, when Xconfigurator has probed the card and you
can press ok don't! Since we have moved the symlink for the Xserver
from /etc/X11/X to /etc/sysconfig/X11/X Xconfigurator will fail to
create the proper link. Thus to make sure the rest of Xconfigurator
goes well, switch to another console and create the link in
/etc/sysconfig/X11 to the advised server. Now just finish
Xconfigurator and test X.
3. Configure anything else which is different then the server /
template:
· sound: You probaly need to modify isapnp.conf and conf.modules,
both are already made links to /etc/sysconfig by the server setup
script.
· cdrom: Link in /dev, entry in /etc/fstab? etc.
· rc.local: Make any nescesarry changes.
4. Save the links and any other changes to /dev type:
/etc/rc.d/rc.devfs save /etc/sysconfig
5. All done.
5. Added bonus: booting from cdrom
Much of the above also goes for booting from cdrom. Since I wanted to
document howto boot from cdrom anyway, I document it in here to avoid
typing a lott of the same twice.
Why would one want to boot a machine from cd-rom? Booting from cdrom
is interesting everywhere where one wants to run a very specific
application, like a kiosk, a library database program or an intenet
cafe, and one doesn't have a network or a server to use a root over
nfs setup.
5.1. Basic Principle
The basic principle is wants again simple, boot with a cdrom as root.
To make this possible we'll use the rockridge extension to put a unix
like filesystem on a cd and the Eltorito extension to make cd's
bootable.
5.1.1. Things can't be that simple
Ofcourse this setup also has a few problems. most are the same as
above:
1. We'll need write access to: /dev, /var & /tmp.
· We'll just use the same solutions as with root over nfs (see
above):
· For /dev we'll use Devfs
· For /var and /tmp we'll use a shared ramdisk of 1mb. It's shared to
use the space as effeciently as possible. /tmp is replaced by a
symlink to /var/tmp to make the sharing possible.
· Populating the ramdisk with tarballs or template dirs, works
equally well. But with template dirs it's much easier to make
changes, thus we'll use template dirs.
2. Some apps need write access to /home.
· Put the homedir of the user's who will be running the application
in /var, and populate it wiht the rest of /var every boot.
3. /etc/mtab needs to be writable:
· Create a link to /proc/mounts and create an empty file mounts in
/proc, see above.
5.2. Creating a test setup.
Now that we know what we want todo and how, it's time to create a test
setup:
1. For starters just take one of the machines which you want to use
and put in a big disk and a cd-burner.
2. Install your linux of choice on this machine, and leave a 650mb
partition free for the test setup. This install will be used to
make the iso-image and to burn the cd's from, so install the
nescesarry tools. It will also be used to restore any booboo's
which leave the test setup unbootable.
3. On the 650 mb partition install your linux of choice with the setup
you want to have on the cd, this will be the test setup
4. Boot the test setup.
5. Compile a kernel as described in Section 3.1, follow all the steps,
the changes need for devfs are still needed! At step 3 of Section
3.1 put in the following:
· isofs compiled in
· devfs compiled in
· cdrom support compiled in
· everything else you need either compiled in or as module.
6. Configure the test setup:
· Create the user which we'll be running the application.
· Put it's homedir in /var.
· Install the application if needed.
· Configure the application if needed.
· Configure the user so that the application is automagicly run after
login.
· Configure linux so that it automaigcly logs in the user.
· Configure anything else which needs configuring.
7. Test that the test setup automagicly boots into the apllication and
everything works.
8. Boot the main install and mount the 650 mb partition on /test of
the main install.
9. Put the following in a file called /test/etc/rc.d/rc.iso, this file
we'll be sourced at the begining of rc.sysinit to create /var
___________________________________________________________________
#/var
echo Creating /var ...
mke2fs -q -i 1024 /dev/ram1 1024
mount /dev/ram1 /var -o defaults,rw
cp -a /lib/var /
#restore devfs settings, needs proc
mount -t proc /proc /proc
/etc/rc.d/rc.devfs restore /etc/sysconfig
umount /proc
___________________________________________________________________
10.
Edit /test/etc/rc.sysinit comment the lines we're the root is
remounted rw and add the following 2 lines directly afer setting
the PATH:
___________________________________________________________________
#to boot from cdrom
. /etc/rc.d/rc.iso
___________________________________________________________________
11.
Copying the following to a script and executing it, this wil create
a template for /var and make /tmp and /etc/mtab links.
___________________________________________________________________
#!/bin/sh
echo tmp
rm -fR /test/tmp
ln -s var/tmp /test/tmp
###
echo mtab
touch /test/proc/mounts
rm /test/etc/mtab
ln -s /proc/mounts /test/etc/mtab
###
echo var
mv /test/var/lib /test/lib/var-lib
mv /test/var /test/lib
mkdir /test/var
ln -s /lib/var-lib /test/lib/var/lib
rm -fR /test/lib/var/catman
rm -fR /test/lib/var/log/httpd
rm -f /test/lib/var/log/samba/*
for i in `find /test/lib/var/log -type f`; do cat /dev/null > $i; done
rm `find /test/lib/var/lock -type f`
rm `find /test/lib/var/run -type f`
___________________________________________________________________
12.
Remove the creation of /etc/issue* from /test/etc/rc.local it will
only fail.
13.
Now boot the test partition again, it will be read only just like a
cdrom. If something doesn't work reboot to the working partition
fix it, try again etc. Or you could remount / rw ,fix it then
reboot straight into to test partition again. To remount / rw type:
mount -o remount,rw /
5.3. Creating the cd
5.3.1. Creating a boot image
First of all boot into the workign partition. To create a bootable cd
we'll need an image of a bootable floppy. Just dd-ing a zimage doesn't
work since the loader at the beginning of the zimage doesn't seem to
like the fake floppydrive a bootable cd creates. So we'll use syslinux
instead.
1. Get boot.img from a redhat cd
2. Mount boot.img somewhere through loopback by typing:
mount boot.img somewhere -o loop -t vfat
3. Remove everything from boot.img except for:
· ldlinux.sys
· syslinux.cfg
4. Cp the kernel-image from the test partition to boot.img.
5. Edit syslinux.cfg so that it contains the following, ofcourse
replace zImage by the appropiote image name:
___________________________________________________________________
default linux
label linux
kernel zImage
append root=/dev/<insert your cdrom device here>
___________________________________________________________________
6. Umount boot.img:
umount somewhere
7. If your /etc/mtab is a link to /proc/mounts umount won't
automagicly free /dev/loop0 so free it by typing:
losetup -d /dev/loop0
5.3.2. Creating the iso image
Now that we have the boot image and an install that can boot from a
readonly mount it's time to create an iso image of the cd:
1. Copy boot.img to /test
2. Cd to the directory where you want to store the image make sure
it's on a partition with enough free space.
3. Now generate the image by typing:
mkisofs -R -b boot.img -c boot.catalog -o boot.iso /test
5.3.3. Verifying the iso image
1. Mounting the image throug the loopbackdevice by typing:
mount boot.iso somewhere -o loop -t iso9660
2. Now verify that the contents is ok.
3. Umount boot.iso:
umount somewhere
4. If your /etc/mtab is a link to /proc/mounts umount won't
automagicly free /dev/loop0 so free it by typing:
losetup -d /dev/loop0
5.3.4. Writing the actual cd
Assuming that you've got cdrecord installed and configured for your
cd-writer type:
cdrecord -v speed=<desired writing speed> dev=<path to your
writers generic scsi device> boot.iso
5.4. Boot the cd and test it
Well the title of this paragraph says it all ;)
6. Thanks
· The HHS (Haagse Hoge School) a dutch college where I first
developed and tested this setup for use in a couple of labs. And
where the initial version of this HOWTO was written.
· ISM a dutch company where I'm doing my final project. Part of the
project involves diskless machines, so I got to develop this setup
further and had the time to update this HOWTO.
· All the users who will give me usefull input once this first
version is out ;)
7. Comments
Comments suggestions and such are welcome. They can be send to Hans de
Goede at: j.w.r.degoede@et.tudelft.nl
