VCR-HOWTO - Using your GNU/Linux computer as a VCR
Brian Hayward, twivel@slothmud.org
0.04, 2001-07-30
This is a guide to setting up your GNU/Linux workstation as a digital
VCR using the video4linux driver and a supported tuner card. A sec
tion has been added for creating VCD's that can be played in any
DVD/VCD player as well.
______________________________________________________________________
Table of Contents
1. Introduction
1.1 Copyright
1.2 Disclaimer
1.3 News
1.4 Credits
1.5 Translations
2. Technologies
2.1 Tuner or Capture Card
2.2 Kernel video4linux driver
2.3 Frame Capture Software
3. Implementation
3.1 Install and Configure Tuner Card
3.2 Configure xawtv to function properly.
3.2.1 Sample .xawtv configuration file.
3.3 Install the avifile library
3.3.1 Compiling and installing avifile-0.53-5
3.4 Installing the VCR frame-grabber program
3.4.1 Compiling and installing vcr-1.07
3.4.2 Sample .vcrrc configuration file
3.5 Using cron to record your favorite program.
3.5.1 Sample cron shell script
3.5.2 Calling the script from cron
3.5.3 Calling the script from at
4. Alternate Recorder - Creating VCD's for playback on DVD/VCD Players
4.1 Introduction to VCD Creation
4.2 Required Hardware for VCD Creation and Playing
4.3 Required Software for VCD Creation
4.4 Procedure for creating a VCD
5. Further Information
5.1 MyVCR Wrapper Program proposal
5.2 Alternate Recorders
5.3 Recording Results
5.4 Other Suggested Ideas
6. Getting Help
7. Concluding Remarks
8. Questions and Answers
______________________________________________________________________
1. Introduction
This is a guide to setting up your GNU/Linux computer as a VCR.
Setting up my VCR took a little research, but it didn't turn out to be
as difficult as I thought. I decided to publish my results so others
may benefit from what I've done. This is by no means the only method
to achieve the same results as there are several applications out
there that may perform similar tasks. Hopefully any unique procedures
for configuring other software or devices may be incorporated into
this document.
1.1. Copyright
Copyright (c) 2001 by Brian Hayward (Twivel)
Please freely copy and distribute (sell or give away) this document in
any format. It's requested that corrections and/or comments be
forwarded to the document maintainer. You may create a derivative work
and distribute it provided that you:
· Send your derivative work (in the most suitable format such as
sgml) to the LDP (Linux Documentation Project) or the like for
posting on the Internet. If not the LDP, then let the LDP know
where it is available.
· License the derivative work with this same license or use GPL.
Include a copyright notice and at least a pointer to the license
used.
· Give due credit to previous authors and major contributors.
If you're considering making a derived work other than a translation,
it's requested that you discuss your plans with the current
maintainer.
1.2. Disclaimer
Use the information in this document at your own risk. I disavow any
potential liability for the contents of this document. Use of the
concepts, examples, and/or other content of this document is entirely
at your own risk.
All copyrights are owned by their owners, unless specifically noted
otherwise. Use of a term in this document should not be regarded as
affecting the validity of any trademark or service mark.
Naming of particular products or brands should not be seen as
endorsements.
You are strongly recommended to take a backup of your system before
major installation and backups at regular intervals.
1.3. News
This is the first release. No news yet.
The latest version of this document can be found at Here
<http://www.slothmud.org/~hayward/vcr-howto>.
1.4. Credits
The following individuals either helped me directly or indirectly
during the process of developing this HOWTO. Several tips that were
suggested by these people have not been added to this document yet,
don't worry - all in good time.
david (at) lupercalia.net -- For talking me into learning SGML
sjgoen (at) nyx.net -- The template for this HOWTO
knordberg (at) oru.edu -- Help with design and proof reading of this HOWTO
serge (at) tux.org -- Lots of Tips for expanding the document
gferg (at) hoop.timonium.sgi.com -- Help with SGML
remenyi (at) ace-net.com.au -- Suggestions for expanding this document
nando (at) antunes.eti.br -- Working on Portuguese Translation.
linuxpe (at) uol.com.br -- Working on Portuguese Translation.
sam (at) daemoninc.com -- Tips for expanding this document.
HeikoL77 (at) web.de -- Links to more information.
Henry.Kingman (at) zdnet.com -- Links to more information on supported video cards.
aoe (at) mars.tuwien.ac.at -- Alexander provided the section on creating VCD's.
1.5. Translations
Marcio Montenegro was kind enough to translate this document to
Portuguese. His translation is available at this site
<http://sites.uol.com.br/linuxpe>. Feel free to translate this
document to other languages. If you send me a link, I will credit you
and include it in this document. Please note that for it to be
included in the Linux Documentation Project, you will have to provide
it in sgml format.
2. Technologies
This section describes the different technologies used to build your
own Linux VCR.
2.1. Tuner or Capture Card
You will need to install a supported video4linux capture card in your
computer. I currently use the Hauppauge WinTV tuner card which I
purchased from Best Buy, but many other cards should work just as
well. I don't have a suggestion for which is best, I can only comment
that the one I own works for me.
2.2. Kernel video4linux driver
Many GNU/Linux distributions already provide a Linux kernel that is
configured to support video4linux devices. The Hauppauge WinTV card
is supported by the 'bttv' driver. I have to load two modules into
the linux kernel to support my card, namely the 'tuner' and 'bttv'
modules. Check out the V4L homepage
<http://roadrunner.swansea.linux.org.uk/v4l.shtml> for details on
supported tuner cards. Also check out ZDnet Linux Hardware
<http://lhd.zdnet.com/db/searchproduct.cgi?_catid=17> for information
about Linux tuner cards.
2.3. Frame Capture Software
Recording with your digital VCR of course requires frame capture
software. As I become aware of available software for capturing
audio/video to mpeg/avi formats, I will place it in this list. If you
have any suggestions for good software please let me know and I'll add
it here.
3. Implementation
Now lets go through the steps of actually configuring your computer as
a VCR.
3.1. Install and Configure Tuner Card
My particular tuner card required special parameters to the 'tuner'
and If you can watch TV through your card via xawtv, then you have
correctly configured your card. Here are the configuration lines from
my /etc/modules.conf (or /etc/conf.modules for older distributions).
options -k bttv radio=1 card=2
options -k tuner debug=0 type=6
These parameters will vary depending on the model of your card, see
the documentation found in the linux source (linux/Documenta
tion/video4linux) to figure out exactly how to configure your card. I
added these modules to /etc/modules so they would automatically load
on bootup. You can also manually load them with 'modprobe modulename'
as root. I'm currently using the 2.4.2 kernel, but I have had success
with this card with all of the 2.2.x kernels as well. Hint: the user
may need to have ownership of the /dev/video /dev/video0 files (and
maybe other devices as well) before the tuner card will function. As
always, I suggest not running any apps as root.
3.2. Configure xawtv to function properly.
You can either use xawtv from a reasonably current distribution, or
download the source code from the xawtv Homepage
<http://www.strusel007.de/linux/xawtv/> Make sure xawtv functions for
your tuner card before proceeding.
3.2.1. Sample .xawtv configuration file.
Here is a sample ".xawtv" configuration file. This should be placed
within the home directory for the user who will be doing the VCR
recording. I suggest adding presets to your .xawtv file for all
channels(0-NNN) (even non-existing ones) because you will use the
"v4lctl" command to switch channels later. This command makes use of
'preset number' rather than 'channel number', so it's convenient to
have preset numbers be the same as actual channel numbers. The
following configuration file was designed for US-cable, your mileage
may vary.
[global]
freqtab = us-cable
pixsize = 128 x 96
pixcols = 1
jpeg-quality = 75
mjpeg-quality = 75
toggle-mouse = 0
keypad-ntsc = no
osd = yes
# [Station name]
# capture = overlay | grabdisplay | on | off
# input = Television | Composite1 | S-Video | ...
# norm = PAL | NTSC | SECAM | ...
# channel = #
# fine = # (-128..+127)
# key = keysym | modifier+keysym
# color = #
# bright = #
# hue = #
# contrast = #
[defaults]
norm = NTSC
capture = over
input = Television
[CH0 0]
channel = 0
fine = 0
[CH1 1]
channel = 1
fine = 0
[CH2 2]
channel = 2
fine = 0
[CH3 3]
channel = 3
fine = 0
[CH4 4]
channel = 4
fine = 0
[CH5 5]
channel = 5
fine = 0
[CH6 6]
channel = 6
fine = 0
[CH7 7]
channel = 7
fine = 0
[CH8 8]
channel = 8
fine = 0
[CH9 9]
channel = 9
fine = 0
[CH10 10]
channel = 10
fine = 0
[CH11 11]
channel = 11
fine = 0
[CH12 12]
channel = 12
fine = 0
[CH13 13]
channel = 13
fine = 0
[CH14 14]
channel = 14
fine = 0
[CH15 15]
channel = 15
fine = 0
[CH16 16]
channel = 16
fine = 0
[CH17 17]
channel = 17
fine = 0
[CH18 18]
channel = 18
fine = 0
[CH19 19]
channel = 19
fine = 0
[CH20 20]
channel = 20
fine = 0
[CH21 21]
channel = 21
fine = 0
[CH22 22]
channel = 22
fine = 0
[CH23 23]
channel = 23
fine = 0
[CH24 24]
channel = 24
fine = 0
[CH25 25]
channel = 25
fine = 0
[CH26 26]
channel = 26
fine = 0
[CH27 27]
channel = 27
fine = 0
[CH28 28]
channel = 28
fine = 0
[CH29 29]
channel = 29
fine = 0
[CH30 30]
channel = 30
fine = 0
[CH31 31]
channel = 31
fine = 0
[CH32 32]
channel = 32
fine = 0
[CH33 33]
channel = 33
fine = 0
[CH34 34]
channel = 34
fine = 0
[CH35 35]
channel = 35
fine = 0
[CH36 36]
channel = 36
fine = 0
[CH37 37]
channel = 37
fine = 0
[CH38 38]
channel = 38
fine = 0
[CH39 39]
channel = 39
fine = 0
[CH40 40]
channel = 40
fine = 0
[CH41 41]
channel = 41
fine = 0
[CH42 42]
channel = 42
fine = 0
[CH43 43]
channel = 43
fine = 0
[CH44 44]
channel = 44
fine = 0
[CH45 45]
channel = 45
fine = 0
[CH46 46]
channel = 46
fine = 0
[CH47 47]
channel = 47
fine = 0
[CH48 48]
channel = 48
fine = 0
[CH49 49]
channel = 49
fine = 0
[CH50 50]
channel = 50
fine = 0
[CH51 51]
channel = 51
fine = 0
[CH52 52]
channel = 52
fine = 0
[CH53 53]
channel = 53
fine = 0
[CH54 54]
channel = 54
fine = 0
[CH55 55]
channel = 55
fine = 0
[CH56 56]
channel = 56
fine = 0
[CH57 57]
channel = 57
fine = 0
[CH58 58]
channel = 58
fine = 0
[CH59 59]
channel = 59
fine = 0
3.3. Install the avifile library
Download the latest avifile package from DiVX :-) Homepage
<http://divx.euro.ru>. You will need avifile-0.5x and binaries-
xxxxxx.zip. You should extract the binaries to /usr/lib/win32. The
next section describes compiling and installing avifile-0.53-5.
3.3.1. Compiling and installing avifile-0.53-5
# tar xvfz avifile-0.53-5.tar.gz
# cd avifile-0.53-5
# ./configure
# make
# make install
# mkdir /usr/lib/win32
# cd /usr/lib/win32
# unzip /path/to/binaries-010122.zip
You will need to be root for the make install step to work. If you
receive any errors, they were probably due to a missing dependency
during the configure step. Resolve any dependencies and try again.
This should work smoothly on any recent distribution that was
installed with 'development' tools.
3.4. Installing the VCR frame-grabber program
You can get the latest vcr program (vcr-1.07 at the time I wrote this)
from The VCR Homepage <http://www.stack.nl/~brama/vcr/>.
3.4.1. Compiling and installing vcr-1.07
You will need to be root for the make install step to work.
# tar xvfz vcr-1.07.tar.gz
# cd vcr-1.07
# ./configure
# make
# make install
3.4.2. Sample .vcrrc configuration file
By default, vcr installs everything into /usr/local (unless you
changed the prefix on the ./configure line). You can now read the man
page for vcr with: 'man -M/usr/local/man vcr'. This is where I got
the initial .vcrrc file. I configured this one for my needs and added
the same presets to this file as I did with the .xawtv file. If you
think these files look similar, it's because vcr was originally based
on the xawtv code base. Here is the .vcrrc I use: (note that the new
'audiobitrate' parameter means record audio in mp3 format at the
specified bitrate. mp3 audio is MUCH! smaller than PCM audio that vcr
records by default. 30 minutes = 113 megs for mp3 instead of 240megs
for PCM!).
[defaults]
quality = 95
keyframes = 15
codec = DivX ;-) low-motion
attributes = BitRate=1600
source = Television
norm = ntsc
verbose = 1
freqtab = us-cable
audiofrequency=44
audiobitrate=64
resolution=384
framerate = 29.97
grabdevice=/dev/video0
[CH0 0]
channel = 0
fine = 0
[CH1 1]
channel = 1
fine = 0
[CH2 2]
channel = 2
fine = 0
[CH3 3]
channel = 3
fine = 0
[CH4 4]
channel = 4
fine = 0
[CH5 5]
channel = 5
fine = 0
[CH6 6]
channel = 6
fine = 0
[CH7 7]
channel = 7
fine = 0
[CH8 8]
channel = 8
fine = 0
[CH9 9]
channel = 9
fine = 0
[CH10 10]
channel = 10
fine = 0
[CH11 11]
channel = 11
fine = 0
[CH12 12]
channel = 12
fine = 0
[CH13 13]
channel = 13
fine = 0
[CH14 14]
channel = 14
fine = 0
[CH15 15]
channel = 15
fine = 0
[CH16 16]
channel = 16
fine = 0
[CH17 17]
channel = 17
fine = 0
[CH18 18]
channel = 18
fine = 0
[CH19 19]
channel = 19
fine = 0
[CH20 20]
channel = 20
fine = 0
[CH21 21]
channel = 21
fine = 0
[CH22 22]
channel = 22
fine = 0
[CH23 23]
channel = 23
fine = 0
[CH24 24]
channel = 24
fine = 0
[CH25 25]
channel = 25
fine = 0
[CH26 26]
channel = 26
fine = 0
[CH27 27]
channel = 27
fine = 0
[CH28 28]
channel = 28
fine = 0
[CH29 29]
channel = 29
fine = 0
[CH30 30]
channel = 30
fine = 0
[CH31 31]
channel = 31
fine = 0
[CH32 32]
channel = 32
fine = 0
[CH33 33]
channel = 33
fine = 0
[CH34 34]
channel = 34
fine = 0
[CH35 35]
channel = 35
fine = 0
[CH36 36]
channel = 36
fine = 0
[CH37 37]
channel = 37
fine = 0
[CH38 38]
channel = 38
fine = 0
[CH39 39]
channel = 39
fine = 0
[CH40 40]
channel = 40
fine = 0
[CH41 41]
channel = 41
fine = 0
[CH42 42]
channel = 42
fine = 0
[CH43 43]
channel = 43
fine = 0
[CH44 44]
channel = 44
fine = 0
[CH45 45]
channel = 45
fine = 0
[CH46 46]
channel = 46
fine = 0
[CH47 47]
channel = 47
fine = 0
[CH48 48]
channel = 48
fine = 0
[CH49 49]
channel = 49
fine = 0
[CH50 50]
channel = 50
fine = 0
[CH51 51]
channel = 51
fine = 0
[CH52 52]
channel = 52
fine = 0
[CH53 53]
channel = 53
fine = 0
[CH54 54]
channel = 54
fine = 0
[CH55 55]
channel = 55
fine = 0
[CH56 56]
channel = 56
fine = 0
[CH57 57]
channel = 57
fine = 0
[CH58 58]
channel = 58
fine = 0
[CH59 59]
channel = 59
fine = 0
3.5. Using cron to record your favorite program.
You may want to verify vcr will record your program before setting up
cron to record your programs. You can test this by doing "vcr -t 2m
test.avi", then try to play back that two-minute sample using aviplay.
Note that you will need to add to work properly. It was also
suggested that you can use 'at' to record your program as well, this
may be useful for times when you just want to record a program once at
a specific time, but not regularly. Here is a sample shell script
that can be called from cron:
3.5.1. Sample cron shell script
This is a very simple script that merely switches to a channel and
records sixty minutes of a program to a date oriented filename. Place
this in $HOME/bin of the user who will actually do the recording -
since I am going to run it at 6pm, I'll call it recordshow6pm.sh.
#!/bin/sh
LD_LIBRARY_PATH=/usr/local/lib
export LD_LIBRARY_PATH
PATH=/usr/local/bin:$PATH
export PATH
DATE=`date +%m%d%y`
FILENAME=/path/to/myshow-6pm-$DATE.avi
v4lctl setstation 3
vcr -t 60m $FILENAME
3.5.2. Calling the script from cron
Now it's time to call it from cron, monday through friday at 6pm. To
do this, run the crontab -e command as the correct user and enter the
following line:
00 18 * * 1-5 /home/username/bin/recordshow6pm.sh
3.5.3. Calling the script from at
If you'd rather call the script from at, for one-time execution, you
may instead do this:
at -f /home/username/bin/recordshow6pm.sh 18:00
4. Alternate Recorder - Creating VCD's for playback on DVD/VCD Play
ers
4.1. Introduction to VCD Creation
I must thank Alexander Oelzant for creating this portion of the VCR-
HOWTO. His original version is located at: README.bttv2mpeg
<http://131.130.199.155/~aoe/mystuff/mpeg2_movie-
avipatch/README.bttv2mpeg>.
After recording shows on my computer for a while, I realized it was
much nicer to watch the shows on my full-sized television set than to
watch them on my computer monitor. There are two options for doing
this: 1) Purchase a video card with TV-OUT and run a cable to my
television. or 2) Create a VCD and play it in my DVD Player. Since
CD-R and CD-RW media is really cheap I decided to go this route.
This section could theoretically be done in a different HOWTO because
it uses a different method for recording/converting than the other
sections of the VCR-HOWTO use. This is primarily because I haven't
figured out how to create VCD compatible mpeg's using vcr. If your
goal is to create VCD's, use this section of the HOWTO. If you don't
care about VCD's, completely ignore this section of the howto because
these procedures require MUCH MORE disk space than using vcr to record
for playing under linux.
4.2. Required Hardware for VCD Creation and Playing
1)A linux supported CD writer.
2)A bttv compatible TV Tuner Card (WinTV is one good example)
3)A VCD player or DVD Player
4.3. Required Software for VCD Creation
This is one method for creating VCD's under linux. If you have a
better method, please let me know. The following list of software
contains the versions I found to work well for me under Red Hat 7.1.
1)NuppelVideo 0.52a (nuvrec must be setuid root)
2)exportvideo 7e-pre4 (must be this version or later)
3)mjpegtools 1.4.1 (installed rpm found on rpmfind.net)
4)toolame 02h
5)mplex 1.1
6)vcdimager 0.6.2 (installed rpm found on rpmfind.net)
7)cdrdao 1.1.4 (rpm from redhat 7.1)
4.4. Procedure for creating a VCD
1)nuvrec -t _NUM_m _filename_
_NUM_m = size. E.g. 30m = 30 minutes.
2)nuvplay -e _filename_.nuv | toolame -b 224 -m s /dev/stdin _filename_.mp2
3)exportvideo _filename_.nuv "|mpeg2enc -o _filename_.m1v"_
4)mplex -f 1 -s 2324 -p 1 -o _filename_.mpg _filename_.m1v _filename_.mp2_
5)vcdimager -l "Movie Title" -c _filename_.cue -b _filename_.bin _filename_.mpg_
6)cdrdao write --device _your_device_ _filename_.cue_
7)Eject the cd-r, stick it in the vcd player, press play and enjoy._
8)File Sizes From each step for 30 minutes of data._
Bytes Filename Created from step? Can Delete after Step?
=====================================================================
1391756119 finefilm.nuv 1) nuvrec 2) toolame and 3) mpeg2enc
50401280 finefilm.mp2 2) toolame 4) mplex
259097824 finefilm.m1v 3) mpeg2enc 4) mplex
313793452 finefilm.mpg 4) mplex 5) vcdimager
120 finefilm.cue 5) vcdimager 6) cdrdao
318808896 finefilm.bin 5) vcdimager 6) cdrdao
---------------------------------------------------------------------
Total approx 2.3g for 30 minutes of sample data.
If you delete previous files after the appropriate steps, max used space
for 30 minutes of data was 1.7gb.
5. Further Information
In this section, you'll find more information on additional utilities
or ideas for making a VCR work under Linux.
5.1. MyVCR Wrapper Program proposal
We need a wrapper program that provides us with the ability to do the
following things (from a main menu)
· Archive recorded shows to CDR/CDRW/DVDRAM
· Play Recorded shows (From hard disk or prompt for the media!)
· Set record times for recording shows - use tvguide.com as a source
for showtimes. A program that accesses tvguide.com for showtimes
is: tvguide.com perl program
<http://http://www.cherrynebula.net/projects/tvguide/tvguide.php>
· Be fully configurable to used preferred recorder/player.
· See Kvdr <http://www.s.netic.de/gfiala/> as a possible place to
start.
5.2. Alternate Recorders
· Slow-CPU Capture Program
<http://mars.tuwien.ac.at/~roman/nuppelvideo>
· Vstream <http://www.ee.up.ac.za/~justin/bttv>
· Qdvt <http://www.ee.up.ac.za/~justin/videostuff>
5.3. Recording Results
· Serge Wroclawski - 200mhz CPU is not fast enough.
· Brian Hayward - 900mhz Duron is fast enough.
· Brian Hayward - 875mhz Duron is fast enough.
· Stephen Moore - 500mhz Celeron CPU is not fast enough.
5.4. Other Suggested Ideas
· Describe recording from FM Tuner (radio) card and piping it to
oggvorbiz or mp3encoder.
· Cable Descramblers: fscktv <http://fscktv.fortyoz.org/> and CableTV
<http://linux.davecentral.com/cgi-bin/homepage.pl?6158>.
· Figure out how to implement VCR+
<http://www.righto.com/papers/vcr.html>
· Check out the Video Disk Recorder Project
<http://www.cadsoft.de/people/kls/vdr/index.htm> - build your own
digital satellite receiver.
· Check out the LinuxTV project <http://linuxtv.org/>.
· A Menu Driven Video Recorder: Kvdr <http://www.s.netic.de/gfiala/>
6. Getting Help
Feel free to contact me if you have any questions. For product
specific questions, you may also make use of resources for the
specific application. As always, read the documentation for each
product before contacting someone. I may be contacted at
twivel@slothmud.org <mailto:twivel@slothmud.org>.
7. Concluding Remarks
I hope this document has been helpful. If you have any ideas or
improvements to this document, please feel free to contact me.
8. Questions and Answers
This is just a collection of what I believe are the most common
questions people might have. Give me more feedback and I will turn
this section into a proper FAQ.
· Q:Why don't I get audio when playing back recorded programs?
A: This could be due to several things. In order for audio
recording to work, you must have the tuner card send output to the
'line-in' on your sound card. You must also use the mixer to
enable the line-in on the sound card (if you hear sound while
recording the show, it is probably enabled). I used to have my
tuner card sound sent to my stereo receiver instead of the sound
card, which was why I didn't get sound. Finally, it may be that
the sound was record properly, but your sound device is in use by
another program (esd, licq, xmms, etc).
· Q: Why is my video very jumpy?
A: This may be due to a slow CPU. I currently haven't determined
the exact requirements for recording with this method, I'm hoping
user feedback will help me figure out what CPU is indeed required.
I have a Duron 700 that seems to work fine, but I've heard that
people with a 200-500mhz processor are unable to get smooth video.
· Q: Why is the audio/video out of sync?
A: This may be due to an incorrect FPS setting for your video type.
For NTSC you will want to use 29.97. For PAL you will want to use
25. I still don't get perfect audio/video synchronization - but I
can live with it. Hopefully this will improve over time.
