FBB Packet-radio BBS mini-HOWTO
  Miroslav "Misko" Skoric, YT7MPB, skoric at eunet dot yu
  v1.36, 2005-10-09

  This mini-HOWTO covers the installation and use of the most popular
  amateur packet-radio BBS server software "FBB". That software works
  under Linux, DOS and Windows operating systems. It serves as a bul-
  letin board system (BBS), a mailbox for personal messages, a database
  for various texts, documents and binary files, a server for small use-
  ful calculations etc. Packet radio is a way of connecting computers
  via amateur radio stations.

  1.  Introduction

  I have been using FBB amateur radio software since early nineties. It
  was the time of DOS operating system, so most of us, system
  administrators (or, so called system operators - sysop's), used
  various packet radio server software for DOS.  Versions of FBB packet
  radio BBS server software for DOS, today are known as "DosFBB".


  I still administer one DosFBB database in the SRV (Amateur Radio Union
  of Vojvodina, a part of SRJ).  It is DosFBB v7.00g23 that runs on a
  486DX computer with 16 MB of RAM and Hercules b/w graphics. Since
  December 1999, it runs without any re-boot (excepting some power
  failures). Before that, it was a bit tricky to set up all memory
  management properly, in order to avoid "frozen" system. Although this
  server runs under DOS, its "radio clients" don't depend on that. In
  fact, users of that DosFBB might run their client software under DOS,
  Windows, Linux or any other operating system that offer amateur packet
  radio abilities.


  I have also used DosFBB v5.15c on a 286/12 box at home.  Five years
  ago, when I got better box, Pentium I at 166 MHz with 32 MB of RAM and
  VGA color graphics, I switched to a Windows version of FBB ("WinFBB").
  Author of the software, a radio amateur from France, Jean-Paul F6FBB,
  has made many versions of WinFBB, including 16 bit variant for Windows
  3.x and Windows 9x as well as 32 bit variant for Windows NT. I have
  run both variants until now (at the moment it is 16 bit WinFBB
  v7.00g25 that runs great under Windows NT 4.0).


  Update: In late 1999, I upgraded my system to Celeron 400 MHz, added
  more 64 MB of RAM and switched to bigger hard disk that will have
  enough room to install Linux and try LinFBB ...


  Update: Since Spring 2001, I run WinFBB v7.00i (17 March 2001) under
  Windows 2000 Professional.


  The main difference between DosFBB and WinFBB is that the second one
  offers you to do other jobs with your computer, while FBB is running
  as just any other application. Besides that, it is always nice to copy
  some text from another application (for example, from an Internet
  email) and to paste it into a packet radio message, or vice versa.


  Update: In July 2001, I added  more 128 MB of RAM so my home system is
  very confortable now.


  Finally, you should be aware what I want to have here:


        1. WinFBB when I run Windows.

        2. LinFBB when I run Linux. It should be an
           Xwindow application that may be
           started/stopped similarly to WinFBB.
           That's why X11 LinFBB package is used.

        3. LinFBB when I run Linux, but as a daemon
           that runs in the background. In addition,
           an interface for a local user (myself)
           is needed, as well as an interface to
           monitor the radio channel.

        4. All three versions must be capable to
           share the same configuration files, i.e.
           to be able, for example, to begin a new
           session from the exact position where the
           other version has finished its own last
           session.

        5. I am not an expert in Linux, so I am
           only able to install "factory-made"
           packages for Linux (just like to install
           self executing software packages under
           Windows). I mean of RPM packages. So, there
           are no source (re)compilations here at the
           moment, but in the future we will see  :-)



  2.  How to install X11 (Xwindow) version of LinFBB


  ·  First of all, you should have running Linux with a GUI installed. I
     am fully satisfied with Gnome GUI but I suppose that KDE will be OK
     too (or any other GUI available).



  ·  Download or copy LinFBB (the main ftp site is ftp.f6fbb.org
     <http://ftp.f6fbb.org/> but there are many mirror sites too). For
     example, if you get a file like


       x700e_full.tgz



  it means that it is X11 version 7.00e and it contains all you need in
  tgz archive to install the BBS. On the other hand, a name like


       xd700g_full.tgz



  means that it is not X11 but daemon version 7.00g and it is also com-
  plete to unpack. Further,


  x700f01.tgz



  and


       x700g.tgz



  are "upgrades" to any previous "full" package.  For example, after I
  have upgraded to x700g.tgz I started to run X11 LinFBB 7.00g (04
  August 1998).  BTW, X11 versions are not maintained anymore, but I
  still run it here. It has some bugs but I like it.



  ·  Copy the archive file in /tmp directory.



  ·  You have to make a "base" directory where your FBB will be
     installed. For example you may type: mkdir /usr/local/fbb if you
     want FBB to be there. You have to be logged as



  ·  Then, you should locate yourself in that directory: cd
     /usr/local/fbb.



  ·  Now, you should unpack the archive: tar xvzf /tmp/x700b25.tgz (<--
     use the right name of the archive here).



  ·  When you finished unpacking the archive, you may continue
     installing the software: ./install.sh is the command for that. The
     setup will ask you for the 'base' directory where FBB will be
     installed. If you chose /usr/local/fbb again, you will be told that
     such directory already exists and all files will be overwritten. It
     is OK, so you should answer yes. If everything is fine, you should
     see on the screen that fbb system directories are created. At the
     beginning of that procedure, program will ask you for BBS's
     callsign, name of the city, QTH locator, your name etc. That
     details will become a part of /usr/local/fbb/init.srv file.



  ·  After that, you MUST check this file again manually in order to fix
     some other details needed (because installation script does not fix
     all parts within that file).



  ·  Well, so far - so good. After you have checked all configuration
     files, you may start the software: ./xfbb.sh (<-- type this within
     an xterm or something similar). When you start your BBS for the
     first time, it will ask you to create some files it needs, so you
     should answer "yes" to the questions.


  3.  How to install LinFBB in addition to existing WinFBB

  Notice: Folks, you see, at my place, I have a dual-boot system,
  consisting of Windows NT and Linux (each of them having their own
  partition(s) and file system). I wanted to have 'independent'
  operating systems that won't see each other. So I made two NT's
  partitions as NTFS partitions and rest of the space used Linux as ext2
  & swap partitions.  Well, at first I have installed WinFBB under NT
  and X11 LinFBB under Linux. Both of them worked, but there was a big
  "problem": I could not share their system files. You might say: So,
  what a big deal.  But, my FBB's should serve as packet-radio
  forwarding stations (regardless of which one I boot at the moment), so
  it was really needed for new LinFBB to "know", for example, the
  position where WinFBB has stopped the mail exchange last time (and
  vice- versa, of course).



  ·  Well, in order to allow both WinFBB under Windows NT and LinFBB
     under Linux to use the same system files, it is needed to put these
     files in a place that both operating systems are able to "see". So
     I do that by re-installing WinFBB onto a FAT (FAT16) partition that
     is recognized by NT and Linux too. The best way to do that is to
     install a "fresh" copy of WinFBB on a FAT partition and to copy
     complete "old" WinFBB from NTFS partition over the fresh
     installation (whenever you are asked to rewrite existing files, you
     should answer "yes").



  ·  When that is finished, you should have a "clone" of the existing
     old WinFBB, but this time on the FAT partition that is visible from
     under Linux. Anyway, you should check if the "new" one installation
     is able to run properly as the "old" one.



  ·  I could also recommend you to check the file tree of WinFBB in
     order to become more familiar with it. The file tree of LinFBB is a
     bit different so it is advisable to note various details here and
     there.



  ·  Some files can't be used as they are under both operating systems
     (without some necessary changes). That's why some file names should
     be renamed (or, at least, you should make appropriate copies of
     some files):



             init.srv    ->  init_w.srv
             forward.sys ->  forw_w.sys
             port.sys    ->  port_w.sys
             protect.sys ->  prot_w.sys



  FBB is able to recognize and accept those renamed files.



  ·  Make a backup of the actual WinFBB (I do that by copying the whole
     WinFBB file structure into the other Windows partition that won't
     be shared with Linux, like NTFS one). You'll never know when a
     catastrophe may happen, so as a result, you won't be able to start
     neither of the "old" WinFBB or the "new" LinFBB. As a precaution,
     the backup might be the easiest way to recover at least the old
     WinFBB for a while (until you configure your new LinFBB, OK?).



  ·  Now, you should restart your machine and boot into Linux. Log on as
     'root' or make 'su' from a user's account.



  ·  Mount a shared FAT directory (where FBB files are): mount -t vfat
     /dev/hda2 /mnt/win (for example). If that works, later you may
     adopt that change within your /etc/fstab configuration.



  ·  Copy LinFBB archive to /tmp directory.



  ·  Position yourself to the 'base' directory: cd /usr/local/fbb (for
     example).



  ·  Unpack the archive: tar xvzf /tmp/filename.



  ·  Start the installation script ./install.sh and, after asked for the
     'base' installation directory, chose /usr/local/fbb. It doesn't
     matter if the program warns you that such directory already exists
     so existing files will be overwritten (by the way, if you choose a
     mounted directory shared with NT, many original WinFBB files,
     located there, would be over-written by LinFBB files, so after
     returning to Windows, WinFBB might not be as functional as before
     this installation).



  ·  Copy /usr/local/fbb to /mnt/win/fbb but do *not* rewrite existing
     files with the new files having the same names.



  ·  Copy /mnt/win/fbb/init_w.srv to /mnt/win/fbb/init_l.srv file.



  ·  Edit /mnt/win/fbb/init_l.srv to what is needed for Linux. You may
     use the existing file /mnt/win/fbb/init.srv as an example.



  ·  Copy newly edited /mnt/win/fbb/init_l.srv over the
     /mnt/win/fbb/init.srv (if you do not do that, maybe you wouldn't be
     able to start LinFBB using ./xfbb.sh, like me at the first time).



  ·  Copy /mnt/win/fbb/system/port_w.sys to
     /mnt/win/fbb/system/port_l.sys file.



  ·  Edit /mnt/win/fbb/system/port_l.sys to what is needed for Linux and
     LinFBB. You may use the existing file /mnt/win/fbb/system/port.sys
     as an example.



  ·  Edit /mnt/win/fbb/xfbb.sh in order to fix the right path.



  ·  Ensure that you are in FBB's main directory: cd /mnt/win/fbb (for
     example).



  ·  Start the script ./xfbb.sh to run LinFBB.  If everything is OK,
     your LinFBB under Linux should run with the same configuration as
     your "old" WinFBB under Windows. From this point, both FBB's should
     behave very similar (actually, I must admit that WinFBB has much
     better visual quality than X11 LinFBB, but probably the reasons for
     that you may find in Windows-vs.-Linux-GUI quality "battle field").
     FYI, my actual WinFBB is v7.00g25 (05 January 2000) and X11 LinFBB
     is v7.00g (04 August 1998).



  ·  Although this combination WinFBB/X11 LinFBB works fine, I have
     noticed some problems. For example, LinFBB was not able to use
     amsat forward_to_file routine (located in /mnt/win/fbb/system/fwd
     directory), because that file was composed like this (for example):



         A AMSAT
         *
         P @
         *
         C D:\FBB\SYSTEM\SAT\AMSAT.TXT     <-- looks familiar to DOS/Windows only
         *
         G AMSAT
         *
         --------



  On the other side, LinFBB's amsat.sys (located in /etc/ax25/fbb/fwd
  directory) has suggested something like this:



    A AMSAT
    *
    P @
    *
    C /var/ax25/fbb/sat/amsat.txt     <-- looks familiar to Linux only
    *
    G AMSAT
    *
    --------



  Well, then I copied LinFBB's amsat.sys into /mnt/win/fbb/system/fwd
  directory so it could become functional. As a result, I got two
  amsat.txt files, one of them for each of WinFBB/LinFBB, and of course,
  both files appeared on different locations: the first one was
  /mnt/win/fbb/system/sat/amsat.txt and it was filled by WinFBB; the
  other one was in /var/ax25/fbb/sat/amsat.txt and was filled by LinFBB.
  I didn't like it that way.


  In order to have only one result, regardless of FBB version, the newly
  copied amsat.sys had to be slightly changed:



         A AMSAT
         *
         P @
         *
         *C /var/ax25/fbb/sat/amsat.txt
         C /mnt/win/fbb/system/sat/amsat.txt
         *
         G AMSAT
         *
         --------



  As you can see now, when LinFBB is active, its amsat.sys will not
  forward into its "native" location of amsat.txt.  Instead of that, it
  will go to the location of the WinFBB's amsat.txt and just add some
  new materials into it, OK?


  Well now it's up to you to decide what to do with your growing
  amsat.txt. An old DosFBB manual says that the 'batch' file (I suppose,
  the old good APPEL.BAT) should be adopted in order for SATUPDAT.EXE
  can update sat tracking data and, after that, to erase AMSAT.TXT
  because it is not needed anymore. Well, I haven't found a way to
  manage that in both WinFBB and LinFBB. Actually, whenever I perform
  housekeeping from either of them, it seems that AMSAT.TXT remains
  intact. Happily, it doesn't grow too much, so it's not a big problem.
  Any suggestion here?



  4.  How to install Protus password utility

  Notice: Well, I have been using Protus connection filters for a long
  time now.  At first, it was the version 3.1/1.2 for DosFBB515c and,
  later, version 3.3 for Dos/WinFBB700. I have found Protus as very
  useful utility because of its implementation of automated BBS-to-BBS
  forwarding protection, using MD2 algorithm.  One of the reasons to
  cover Protus in this document is the fact that its author haven't made
  a manual in English yet. I keep trying to translate original manuals
  from Spanish into English, but it is a hard work.  Any good 'Spanish-
  to-English' translator is welcomed to contact me: skoric at eunet dot
  yu


  Protus offers several interesting features:



  ·  It can send a presentation message to all users, informing about
     possibility to make users' access more safe,



  ·  It can send messages to users who have usual, non-restricted
     access, informing about utility's existence,



  ·  It can send messages to users who have no valid access (before
     disconnecting them),



  ·  It can send messages to new users who have connected the BBS for
     the first time, informing them about the password utility.



  ·  It can send messages to users who have entered wrong password
     (before disconnecting them),



  ·  It can inform sysop about almost everything related to users'
     connections (new user on the system, unsuccessful connections etc),



  ·  Messages mentioned above could be translated into various languages
     and used similarly as various language files that FBB system use,



  ·  Messages mentioned above could be different for different BBS
     ports,



  ·  Protus could be activated/deactivated at various intervals of time
     using CRON.SYS system file,



  ·  Passwords could be managed remotely, using an external server,
     developed by Jose EB5IVB,

  ·  ...



  Well, let's see what should be done in order to implement secure
  access to the FBB packet radio BBS, using Protus type of, so called,
  c_filter:



  ·  Users of Dos/WinFBB versions of Protus already know that it is
     needed to create a new directory \FBB\PROTUS where several *.PRT
     files should be placed. In addition, the main C_FILT*.DLL files
     should be copied into \FBB\BIN directory, as well as a couple of
     "system", (i.e. config) *.PRT files that are going to be within
     \FBB\SYSTEM directory.



  ·  After the sysop has copied all files into their proper locations,
     it is needed to make some configuration. The most important files
     are two "system" ones: CONFIG.PRT and USERS.PRT that should be
     carefully adopted to any particular situation. Other *.PRT files
     will work as they are in original, but they may be translated
     because they are originated in Spanish (those files are just the
     parts of information that are sent to users who connect to the
     BBS). For your information, I usually don't care much about,
     because my BBS's are so called "open systems". It means they work
     quite normal for all users in the same way as they worked before
     implementing Protus. Only a couple of callsigns have password
     installed and, when connecting, they know what they are doing, so,
     they don't need any additional info. Your mileage may vary.



  ·  So far - so good. After everything mentioned has been done, you
     have to restart your FBB in order for Protus utility to be
     activated. In all connections to your BBS (including console), you
     should see a line like this: {PROTUS-4.0} just after the well known
     line [FBB-7.00-AB1FHMRX$]. It only gives an information that Protus
     is active on the system. Users of your BBS who don't have their
     passwords, connect just normally as before.  Users who's callsigns
     have password implemented, are prompted for password just after
     their connections.  roman }


  ·  The author of Protus, Jesus EB5AGF, has made several working
     "modes" of its utility. It is possible for users to have various
     kinds of passwords: a fixed phrase (similar as those you are used
     to when connect to the Internet via telephone line, but this way
     the phrase can be masqueraded within the longer answer); a
     changeable answer to the 5 random numbers (just like usual FBB
     sysop's password); a mode that uses automatic answer from user's
     client packet programs; implementation of MD2 and MD5 algorithms;
     FBB-to-FBB automatic protection etc. FYI, my WinFBB is equipped
     with 16-bit Protus 4.0 (13 August 1999).  There is also a 32-bit
     module of the same date that would be called from within 32-bit
     WinFBB (I haven't tested those 32-bit applications).



  ·  Well, the situation regarding working location of Protus files
     under LinFBB is somewhat different.  I have become familiar to the
     directory structure that DosFBB and WinFBB versions of Protus have
     been using, so I considered that it was enough to implement the
     same directory structure when I started the installation of Protus
     under LinFBB.  It was wrong. After having pulled out the remaining
     hair, the things started to work, so, now I am going to tell you
     what to do.



  ·  I have already told you that I have been running here both WinFBB
     under Windows NT and LinFBB under Linux (see also Linux+WinNT mini-
     HOWTO and Lilo mini-HOWTO). That means all Protus stuff has already
     been installed in a way WinFBB has required, except Linux
     executable of c_filter file. I put that one file into /fbb/bin
     directory and, after the next restart of LinFBB, I got the info
     mentioned above: {PROTUS-4.0}. But the password protection was not
     likely to work.  I was told by the author to make a new directory
     /var/ax25/fbb/protus and put *.PRT files there.  I didn't move
     files from \FBB\PROTUS but rather copied them into the new
     location, because I wanted Protus to continue working under WinFBB
     as before. The utility still didn't want to run, unless I also
     copied additional two *.PRT files from \FBB\SYSTEM to the same new
     location (/var/ax25/fbb/protus). After I did that, Protus became
     functional.



  ·  Well, I suppose, the above info would be useful for those of you
     who intend to run *both* Windows and Linux FBB's on the same
     machine.  For the majority of LinFBB-only users, it is just
     important to make /var/ax25/fbb/protus where all *.prt files should
     be placed.  Only c_filter executable should go to /fbb/bin and
     that's it.



  ·  About FBB-to-FBB protection: *both* partners have to install
     Protus. Password for the forwarding partner's callsign must be the
     same at *both* sides of the link. The versions of Protus don't need
     to be the same (neither the versions of FBB, neither the operating
     systems, HI!). Anyway, MD5 algorithm will only work if both parties
     have Protus 4.x and above (I still don't use that, but it is not a
     problem, because my two boxes, DosFBB-Protus3.3 and WinFBB/LinFBB-
     Protus4.0, make all things OK with MD2).



  ·  One of the interesting features of Protus is to log unsuccessful
     connections. Due to the different locations of *.prt files here, I
     have separate logs for WinFBB and LinFBB "c_filtering".  Those of
     you who are going to run only one operating system and appropriate
     version of FBB, will have one complete log of connection errors,
     users make when try to connect your BBS.



  ·  As it was told earlier, if you implemented password protection for
     only some of your users (but not for all of them who connect
     normally) - your system is considered as the "open" one. It means
     that will be logged only unsuccessful tries to enter the system by
     "protected" callsigns. But, if you decided that your BBS can be
     accessed by only those callsigns who have Protus password, that
     means your system is the "closed" one.  Then, there is no way a
     user could enter your FBB unless its callsign has given a password
     within your Protus. Any unauthorized try to connect your BBS is
     also logged.



  ·  In addition, you may decide to have a "guest" access or a "read-
     only" as default for some BBS's access ports and/or for users who
     enter the wrong password. Many combinations are possible.  You
     could even password protect your own FBB console!



  ·  To finish with this topic for now, just to inform you that my X11
     LinFBB is equipped with Protus v4.1b7 (15 February 2000). It has
     some minor bugs, for example, it logs incoming connections with a
     SSID of -48 if a user doesn't have a SSID at all (of course, in
     such case a SSID of -0 would be expected).

     }



  5.  How to install "xfbbd", a daemon version of LinFBB

  Notice: You see, folks, that I keep trying to get as many as possible
  versions of this great software (Jean-Paul, F6FBB, must be very proud
  after reading these words now). What I think when mention "as many as
  possible versions" means that we have learned how to get both WinFBB
  and X11 LinFBB on the same computer. But, that's not all. There is a
  variety of daemon versions of LinFBB. In this section we are going to
  discuss how to *add* a daemon LinFBB to the existing two: X11 LinFBB
  and WinFBB!



  ·  Well, many amateurs have suggested me to install a couple of
     packages that weren't look to me as really requested for LinFBB
     daemon to work.  Anyway, I installed those packages before the
     installation of LinFBB itself:



             libax25.rpm
             ax25apps.rpm
             ax25tool.rpm



  ·  Now it is the right time to install fbbsrv.rpm package. The archive
     was composed to make its own directories, as "base" directories.
     The last new version to start with, that I have managed to find as
     a .rpm package, was 7.01f Release 4 (09 December 1999).



  ·  A file called fbb.conf, serving as the replacement for init.srv, is
     placed in the location: /etc/ax25/fbb.conf



  ·  Unless you are going to install daemon-only system, you should make
     a backup of the following existing files:



        dirmes.sys
        etat.sys
        heard.bin
        inf.sys
        statis.dat
        tpstat.sys



  ·  Now you have to edit /etc/ax25/fbb.conf and change some paths in
     case you already have X11 LinFBB installed on a different path.
     Here you have some examples that cover my particular situation...



  ·  Directory of data files, instead of /var/ax25/fbb, should be
     /mnt/win/fbb/system



  ·  Directory of config files, instead of /etc/ax25/fbb, should be
     /mnt/win/fbb/system



  ·  Directory of message files, instead of /var/ax25/fbb/mail, should
     be /mnt/win/fbb/mail



  ·  Directory of compressed files, instead of /var/ax25/fbb/binmail,
     should be /mnt/win/fbb/binmail



  ·  Directory of users, instead of .../home/fbbdos/..., should be
     .../mnt/win/fbb/users... (case you don't mind that both your WinFBB
     and LinFBB users handle the same location for users' files)



  ·  Directory of YAPP files, instead of /home/fbbdos/yapp, should be
     /mnt/win/fbb/users/yapp (the same reason as above)



  ·  Directory of documentation files, instead of /var/ax25/fbb/docs,
     should be /mnt/win/fbb/docs



  ·  Directory of pg programs, instead of /usr/local/pg, should be
     /mnt/win/fbb/pg



  ·  Path and filename for import file, instead of C:\FBB\MAIL.IN should
     be /mnt/win/fbb/mail.in



  ·  Now you have to edit /usr/sbin/xfbb.sh and change some paths in
     case you already have running X11 version of LinFBB on a different
     path. Here you have an example that cover my particular
     situation...



  ·  Base directory of XFBB software, instead of /var/ax25/fbb, should
     be /mnt/win/fbb



  ·  So far - so good. Now it is the time to start LinFBB daemon. The
     command for that is in the location: /usr/sbin/xfbb.sh and it may
     be executed within an xterm. If everything is OK, you should get
     several system messages on your screen, ending with something like:



             xfbbC/X server running ...
             xfbbd ready and running ...



  ·  Well, daemon itself can't be used to access the BBS so it is needed
     to activate a client that is /usr/sbin/xfbbC. It has a couple of
     parameters (a callsign/password pairs that are stored in
     /fbb/passwd.sys). Note that xfbbC can also be activated within
     another xterm.



  ·  If you are like me, you would like to activate one more xterm with
     xfbbC in a way to monitor your radio frequency. If you have enough
     room on your screen, you may place all three xterm windows side by
     side.



  ·  When you finish your xfbbC console session, it is suitable to use
     the same xterm to eventually stop the daemon. First of all, with
     the command ps ax you should locate PIDs of xfbb.sh shell and
     daemon itself, that you may kill after that.



  6.  How to install an upgrade  to a daemon version of LinFBB


  6.1.  LinFBB v7.02g

  Notice: Well, the main trouble I have discovered with 7.01f daemon was
  the absence of Protus c_filter protection. As I told you before,
  Protus is a "third-party" product, so it might have some problems with
  the compatibility to LinFBB itself. Anyway, it is also possible that a
  daemon version of LinFBB has some special requirements over some
  "third-party" software.



  ·  I also noticed that my version of Protus was newer than the version
     of daemon LinFBB I had at first. Besides that, some hams, including
     F6FBB himself, have suggested me to upgrade LinFBB. I have also
     found a "problem" that I am still new in compiling Linux software,
     so, I'd rather look for pre-compiled packages for easy
     installation.



  ·  Jose, HI8GN, has offered daemon LinFBB v7.02g as a .rpm package (18
     September 2000). I got it from his site:
     http://hi8gn.dynip.com/indice.html
     <http://hi8gn.dynip.com/indice.html>. But, when I tried to install
     it over the previous version 7.01f, it complained about some
     existing LinFBB files.



  ·  Then I had to uninstall the old package, after what some config
     files remained in their locations, but with new .rpmsave
     extensions. It was nice, so I could use them later to update my
     new-installed config files.



  ·  BTW, the installation of Jose's package was performed without
     problems, but the new daemon was not likely to run as I expected,
     although I tried to configure it as best as I could. Not quite
     sure, but it looked to me that F6FBB is likely to implement some
     changes not only to the main executables but to shell files too.
     So, I have decided to save copies of these new xfbbd and xfbbC
     executables from 7.02g package (I have made it with adding
     extensions like .702 to the files). After that, I *uninstalled* the
     rest of that 7.02 .rpm, in order to install the previous version of
     LinFBB once again - the version that I was satisfied with.



  ·  So far - so good. The "old" 7.01f version was installed again and
     tested one more time to be sure it was OK. Then, I just copied the
     previously saved executables from the new package, over the "old"
     executables. In a couple of minutes, the new daemon LinFBB v7.02g
     has come in place and function. Comments...?



  ·  Well, the new daemon is likely to check for some more directories
     than the older version (mostly related to 7plus operations). Next,
     its xfbbC console client looks better than the previous version.
     But, I still miss graphical xfbbX client, that I have found not
     able to become activated. I hope it will be fixed soon. Finally,
     Protus c_filter utility is active too.



  ·  An interesting question might be: is that now a really upgraded
     LinFBB daemon or not? Actually, I haven't changed the "old" script
     xfbbd.sh with the new one, because during the first tests with the
     new 7.02 I was getting lots of error messages.  Looks that the
     directory structure was a bit complicated for me to set properly
     within the new version of xfbbd.sh.  After I returned to xfbbd.sh
     from 7.01 package, the BBS finally started to be run, though
     without some functions like over-night maintaining (that one
     problem I solve in a way to boot the BBS as WinFBB under Windows NT
     where that task is OK).  In addition, there are still some
     mysterious messages telling that m_filter has not been found or
     something like that.  The next tasks are to solve these issues.


  6.2.  LinFBB v7.03

  Notice: As I have said in the previous section, I haven't found an
  easy way to upgrade FBB's (its main executables), without temporary
  uninstalling an older version, then to install the new version - in
  order to get new executables. After that is done, a reverse procedure
  must be put in place.



  ·  Well, it was needed to get 7.03 package (09 December 2000) as an
     .rpm package from www.f6fbb.org/versions.html
     <http://www.f6fbb.org/versions.html>, that was suggested by Jean-
     Paul, F6FBB. Anyway, soon after there appeared several mirror
     sites, offering 7.03 too.



  ·  If you use GnomeRPM, it is easy to uninstall your actual LinFBB (If
     you just try to install new .rpm over the existing LinFBB you will
     get some error messages complaining that you already have FBB
     installed on the computer). Anyway, after the uninstallation, there
     you will find some config files as .rpmsave files, so you could use
     them later again.



  ·  Installation of 7.03 package will give you new executables in
     /usr/sbin directory.  Those new executables should be temporary
     given extensions like .703 (for example).



  ·  So far - so good. Now you should *uninstall* the 7.03 package (of
     course, .703 files won't be unistalled automatically). Uninstall?
     Why? You will find out soon, read on ...



  ·  Once again, you should *install* the last one version of LinFBB
     daemon, that works OK with its own xfbb.sh (in my case, that is
     7.01f).



  ·  For sure, many of you might find it odd, but now it is the right
     time for the executables from /usr/sbin (I mean of all fbb
     executables, except those who were renamed to .703) to get their
     new extensions (in my case, that is .701).



  ·  Well, after that is performed, .703 files should *lose* their
     previously attached extensions, in order to become usable.



  ·  Folks, on that point I usually hold my breath, cd to /usr/sbin and
     type: xfbb.sh following with an Enter. If everything is fine,
     several lines should scroll on the screen, ending with something
     like:



        xfbbC/X server running ...
        xfbbd ready and running ...



  ·  If you don't get something similar on your xterm utility), you're
     out of luck, so you might go through the procedure once again in
     order to be sure you did all what was needed to be done :->



  ·  /usr/sbin/xfbbC is the easiest way to check if your new 7.03 is in
     the game or not. When I mention xfbbC it is good to let you know,
     that I kept living in a belief that xfbbC is also useful for
     regular telnet users (who are also supposed to 'connect' to the BBS
     via the same computer's console, where LinFBB is running from).
     But, I have discovered that my users, who were not declared as
     sysops, are allowed to read all messages (including all private
     messages), as well as to have some other sysop's abilities. I did
     think it was a matter of probably wrong declared security flags.
     But, it was not.



  ·  Recently, I was informed that xfbbC is suitable mostly for sysops,
     so the other users (who might also have access to the local
     keyboard) should rather try something less dangerous, like this:



             telnet localhost 6300



  ·  ... where 'localhost' and '6300' may vary from BBS to BBS. I was
     pleasantly surprised when discovered that telnet is much more
     suitable for ordinary BBS users than sysops' client xfbbC.



  ·  Folks, I also think of writing a chapter about FBB's system
     configuration. Until something like that appears in this howto, you
     should know that all of those callsigns who are going to use xfbbC
     have to be added into your passwd.sys file. In addition, all of
     these folks who are going to telnet the BBS, have to be declared as
     users with the 'M' flag (modem users). It is up to your security
     precautions, if either of them would eventually have 'root'
     capabilities to that one Linux machine itself.


  ·  My next task is to use an old i286/12 MHz box, having only 1 MB of
     RAM, running DOS 5.0, as a card so I would like to 'connect' to the
     BBS from that one 'telnet client' box. If that succeeds, it would
     be a good preparation for installing another LinFBB (in the local
     school club), where several old 286 computers will be also
     available. It would be nice to offer more than one student-amateur
     the opportunity to 'connect' the BBS simultaneously, using a bunch
     of vintage

  6.3.  LinFBB v7.04

  Notice: Maybe I have already explained that I use Red Hat 6.2 at home.
  That's why I usually look for .rpm packages that have been made for
  that particular Linux distribution, but not only that. I have also
  tried to use Red Hat 7.1 but it seemed not to support an older Xwindow
  application, LinFBB 7.00g (04 August 1998).  When I noticed that
  issue, I returned back to Red Hat 6.2.



  ·  Well, I started by downloading the package xfbb-7.04-2.i386.rpm (07
     August 2001) from www.f6fbb.org/versions.html
     <http://www.f6fbb.org/versions.html>



  ·  Folks, this time I finally decided to install version 7.04 as a
     completely "fresh" installation, i.e.  without some parts of any
     previously used "daemon" on the disk. It means that I have
     uninstalled the last daemon version I was using before, and, in
     addition, I also removed the old executables. Of course, before the
     uninstalation, I made the backup of some config files that are not
     version depending (like /etc/fbb.conf), in order to avoid editing
     the same "defaults" once again and again :-)



  ·  The setup procedure has reported some dependency issues. I didn't
     want to get bored with them so I repeated the installation once
     again with "--force" and "--nodeps" options.



  ·  So far - so good. Then, I replaced a couple of "default" files with
     the saved ones.  After that being accomplished, I mounted a FAT
     partition with WinFBB's system files, made a pray and started
     LinFBB's daemon. It was also an interesting new experience to try
     HI8GN's script /usr/sbin/fbb start (activated in an xterm) to start
     the server. Although there were no usual lines:



             xfbbC/X server running ...
             xfbbd ready and running ...



  on my screen, TNC's PTT lamp confirmed that a beacon was really
  transmitted.



  ·  Then I wanted to try HI8GN's script /usr/sbin/monitor to see what's
     going on the frequency. Although I got something like:



             Connecting localhost ... Ok
             Authentication in progress ... Ok
             Monitoring channel 0 ...



  there appeared no traffic on the screen. In order to really monitor
  the channel, I had to start another xterm and type:



             telnet localhost 6300



  Bingo! From the usual FBB's prompt I entered the gateway and typed the
  familiar "M" ("Monitor") command.  Interestingly, as soon as I
  "telnet-ed" to the BBS, /usr/sbin/monitor window, mentioned above,
  started to copy whatever was going on the telnet xterm as long as that
  telnet session was closed. I was in doubt if that was OK or not,
  because there I expected to see the traffic from the radio channel -
  regardless being connected to the system or not. Any suggestion here?



  ·  Well, then I wanted to use /usr/sbin/bbs, in order to connect to
     the client's (or better to say: sysop's) console (xfbbC). Looks
     that there was a line in HI8GN's script:



             xfbbC -c -f -h localhost -i [callsign] -w [password]



  with missing ./ (dot slash) before xfbbC, so the script was not likely
  to be executed. Instead of that it reported that command couldn't be
  found. Anyway, xfbbC v3.01 itself appeared to work nice. It is still
  possible to monitor the working channel too (using the "M" command
  from within the gateway), but this is not a valuable solution because
  while "Monitor ON", it is not confortable to do anything else within
  the gateway. Once again, solutions are welcomed!



  ·  Although the active xfbbC session can be easily terminated using
     "B" ("Bye") command, a fooled /usr/sbin/monitor can not. The user
     has to find its process number, (PID), using ps ax command and then
     kill that process.



  ·  At the end of the game, daemon itself should be stopped. HI8GN's
     script /usr/sbin/fbb stop returns:



             Shutting down xfbbd:          [OK]



  but /usr/sbin/fbb status reports:


             Checking, the FBB daemon
             xfbbd (pid) is running...



  Looks that /usr/sbin/fbb stop does not terminate daemon *every* time
  the command is executed, but re-start it (the only difference is the
  new PID of the process and ps ax can show that new PID). So, there is
  a question why it returns that   [OK] when it is obvious that daemon
  is not stopped, but rather re-started.



  ·  Well, if you are like me, you may also want to experiment with some
     special sysop's commands, from within an xfbbC session. For
     example, "/R" command ("Re-boot PC") shuts down xfbbC and
     /usr/sbin/fbb status reports:



             Checking, the FBB daemon
             xfbbd dead but subsys locked



  while "/A" command ("Stop BBS") returns:



             Stop-request accepted, no connection.



  before shutting down xfbbC client itself.


  Further attempts to re-start either xfbbC client or xfbbd server
  (using /usr/sbin/fbb start) are not successful, unless an additional
  /usr/sbin/fbb stop is executed. The result is:



             Shutting down xfbbd:          [FAILED]



  Now another /usr/sbin/fbb status reports:



             Checking, the FBB daemon
             xfbbd is stopped



  so finally, daemon might be re-started again. Here it is also a
  mystery why it returns that   [FAILED] when it is obvious that daemon
  is really stopped (maybe it is a "failure" when we try to stop the
  same thing twice).


  There are some other commands: "/K" (Re-boot BBS with housekeeping),
  "/M" (Re-boot BBS immediately) and "/L" (Re-boot BBS, waiting users to
  disconnect) - all of them with slight different behavior. Anyway,
  those three commands have something in common: they all re-start the
  daemon (with different PIDs, of course).



  ·  Finally, what I would like to have is to manage housekeeping and
     other maintaining tasks. Until now, that is not accomplished.  I
     suppose that I should make some more fine customization in system
     paths. Any suggestion about is welcomed.



  7.  How to use LinFBB's "xfbbX", a GUI client for Linux

  2002-10-20


  Well, soon after the installation of LinFBB v7.04 .rpm package, I
  noticed a new "kid on the block", i.e. a new item within the Start
  menu (under Gnome environment). That was a "HamRadio" group, having
  several "Xfbb version 7.04" sub-items and one of them was "xfbbd X
  Client".


  It seemed that a mouse click on that "xfbbd X Client" icon was not
  likely to return any response, although xfbbd daemon has been
  successfully running before invoking the client. That's why I have
  been asking for help (related to that issue) from other LinFBB users,
  but it seemed there was no one capable to solve that problem. Anyway,
  it looks to me that there is a "dead" link from this "xfbbd X Client"
  icon to an existing executable.


  Trying to find a solution, the other day I was browsing the /usr/sbin
  directory. I have noticed something that I have already seen for
  several times. That was xfbbX file. Well, I am sure that I tried to
  use this executable earlier, but without much success. This time, I
  have entered the full path, like this:



            /usr/sbin/xfbbX



  and, finally, the GUI client appeared on the screen.


  So far - so good. Soon after, I realized that 'Monitoring' window was
  capable to monitor the actual traffic on the radio frequency, but not
  only that. Headers of all packets appear in green and the actual
  information is in blue, so it is easy to distinguish what is the
  header and what is the text info (comparing to my old X11 LinFBB
  application where everything came in black).  What I could describe as
  a disadvantage of the 'Monitoring' window, is that the scroll bar does
  not give you much of the previous, already scrolled traffic.


  The 'All channels' screen was even better, so the system user
  correspondents' traffic appeared in green, the local user's traffic
  was in black and the port information was in yellow. Unfortunately,
  there's no easy way (if any) to change colors (and that's the standard
  feature in WinFBB) for both 'Monitoring' and 'All channels' windows.
  Maybe I haven't managed yet to find a switch for that, so any useful
  info about is appreciated.


  What I have also found a bit annoying, was that both windows mentioned
  above, appear not arranged side-by-side, a form that would be more
  suitable. Besides that, the third window, 'Console', has to be
  activated with another mouse click (instead of being activated
  automatically with the other two windows). Actually, the whole thing
  of xfbbX client seems to be primarily useful for sysops looking only
  for BBS's command line, in order to execute some server's commands
  etc. That's why I have found a bit strange why the console window must
  be activated separately (OK, I know that's the same with WinFBB's
  windows, but why not to add some additional feature?)


  Anyway, the 'Console' connection window has almost the same
  functionality as WinFBB's 'Console' window. Here I think of the
  commands given at the BBS's command prompt, because they are invoked
  from the usual language *.TXT files.


  But, the big disadvantage of today's version of xfbbX client, I've
  found here, is the absence of several useful icons, that I was very
  fond of within the WinFBB's user interface. For example, there are no
  icons for pending mail, users information, disconnect a user, edit a
  message text or a header etc. It looks to me that xfbbX developers are
  not likely to offer the full comfort that we have within WinFBB's GUI.
  It makes me wonder why? There are lots of commands that can not be
  easily activated without the proper icons. It drives me crazy whenever
  I have to re-boot to Windows to start WinFBB, in order to perform some
  simple tasks mentioned, using the mouse.


  Besides that, there is no way to activate that nice message editor
  screen, very useful in WinFBB (also existed in an old Xwindow LinFBB
  application v7.00g from 1998!) The same goes for replying a message,
  where a sender does not get the text of a message to be replied to,
  within the new message body. In short, I don't like absence of all
  those earlier implemented, but now abandoned features.


  Well, I can't imagine what Jean-Paul, F6FBB, and other developers
  would do in the future, but I am not satisfied with the idea to only
  keep further development of LinFBB server side, but, in the same time,
  to abandon the development of LinFBB's graphical client side. And not
  only that: It looks that MS Windows client for LinFBB server, xfbbW
  has been reported to be much more functional that described xfbbX,
  while, in the same time, WinFBB server development has been also
  stopped. A bit confusing situation, isn't it?


  Some amateurs think that it is just a result of "global" IT situation:
  Linux (as well as other Unix-type platforms) is better suited for
  servers, but Windows is better for clients. If so, it looks that
  LinFBB packet-radio system operators, "sysop's", seem to be forced to
  run at least two computers, in order to get the same functionality
  they always had with WinFBB.  I'd rather suggest to Jean-Paul, F6FBB,
  and other developers to transfer all known WinFBB's GUI features to
  xfbbX GUI environment, in order to avoid using two computers.


  2002-10-30


  A couple of paragraphs ago, I said that "xfbbd X Client" icon didn't
  work under Gnome environment. It did make me wonder if it would work
  under KDE graphical user interface. So, this time I started KDE (and I
  did it as "root" so, in addition, I also got a mailbox icon on the
  desktop, named "fbb X11". When I located the mouse pointer over that
  icon, there appeared some more description: "F6FBB bbs Server for
  Packet Radio").


  Well, when I tried to click on that icon, I got a KFM Warning message
  box explaining that program /root/.xfbbX could not be executed.
  Fortunately, a "right click" on the icon allowed to enter file's
  Properties.  The Execute card gave me a possibility to change the path
  for a program to be used. So, I did some browsing and located the new
  path: /usr/sbin/xfbbX. After that, another click resulted in running
  the GUI client.


  Interestingly, there is some slight difference between xfbbX
  appearance under KDE and Gnome. Actually, each KDE's xfbbX window has
  "FBB" logo in the upper left corner (Gnome's windows haven't that).
  That may indicate that xfbbX client was produced primarily for KDE
  environment. Besides that, it seems that other features are almost the
  same, regardless being within KDE or Gnome environment.


  On the other side, the already mentioned "xfbbd X Client" item (within
  the Start menu, under the "HamRadio" group), still does not work. I
  suppose that there should also be some modifications, related to
  program executable paths, but I do not know how to manage that.
  Anyway, it does not matter because xfbbX is running here this or that
  way.


  2003-06-30


  A recent email from Jose, HI8GN, related to the xfbbX GUI client,
  about the RPM package:


  "The reason of the why not the xfbbd X Client didn't give you any
  answer is for several causes. 1) if the xfbbd daemon is not running
  the xfbbd X client won't run. 2) if the xfbbd is dead in its process.
  3) if the xfbbd was not shutoff correctly, but delete the xfbbd lock
  file as this:


  . /etc/init.d/rc.fbb stop or service rc.fbb stop, and then it was run
  and didn't create the xfbbd lock file, the shell script looks for the
  existence the /var/lock/subsys/xfbbd or /var/lock/subsys/xfbbX lock
  file and 4) if the xfbb X11 Server it is running it create a xfbbX
  lock file by that the xfbbd X client won't neither run


  the same thing makes the X11 Client the one it verifies that the xfbbd
  is not running
  if you make a click on the Icon that says fbb X11 Client and it
  doesn't run it is because the one is seeing that there is a process of
  the xfbbd running like as daemon.  the script rc.fbb I have also
  modified it so that it can not be executed twice.


  if exist xfbbX lock file the xfbbd X client won't run if exist xfbbd
  lock file the fbb X11 won't run.


  Lastly if you execute the command fbb in the console or in xterminal
  in the desktop, you will see what I mean that simple."


  Thanks Jose!



  8.  How to use LinFBB's "xfbbW", a GUI client for Windows

  2002-11-17


  Notice: Well, folks, I couldn't try to install and use LinFBB client
  for Windows, because I have not had a second computer for that
  purpose. The only way to check how this client works, was to borrow a
  laptop machine and give it a try.


  The first task was to link that Windows laptop to a Linux desktop. I
  had some difficulties with the network card on the desktop box,
  because it seemed not to be likely to start the appropriate eth0
  interface. I'll give you some more details about the equipment here:
  Linux is Red Hat 6.2 and my ISA network card has UMC UM9008 chip. Long
  ago, I used some utilities that should "recognize" ISA cards (if I
  remember their names, that were isapnptools, pnpdump etc).


  What I do know, is that such tools should have add some new lines into
  the existing files, like /etc/conf.modules or, to create some new
  files, like /etc/isapnp*.  Well, I have forgotten what exactly should
  be done, so I went to look for the right tools. The one that was
  looking suitable was /sbin/isapnp. Although I got its response on the
  screen, telling that the UM9008 chip was recognized, there was nothing
  added to the system files, nor new files seemed to be created.


  What I also tried to use, was the old good Linuxconf tool, that was
  already installed per default within RH 6.2 Linux. I found the right
  place to add the information related to NIC's IRQ and I/O address.
  There I seemed to make a little mistake, so I put the value of 220
  (for the I/O address), instead of 0x220 that would better fit. The
  result was as one may expect: the interface eth0 continued to report
  that a ne module had not found a card at that one address. Then I
  checked the actual I/O address the card uses under Windows OS (was the
  same) and tried to fix the parameters (Thanks goes to a UK ham who
  advised me to have to let Linux know the proper IRQ and I/O
  addresses).


  Interestingly, Linuxconf added a couple of new lines into
  /etc/conf.modules too. In short, the next time during the system boot,
  the interface eth0 reported a green [OK], so I could establish the
  link. So far - so good.

  The next task was to download the client package from the FBB's main
  site. I did it from the "Newest version" web page and the number of
  the version was 1.12 (it seems that was not a pretty much new version,
  or maybe the content on that "newest" page has not been updated
  recently - another task for Jean-Paul?). Anyway, I installed it
  without any problem, configured its part related to the LinFBB server
  it was about to access, changed the console font to my favorite one
  (Tahoma) and started the utility.


  At the first sight, the client looked great, because Linux clients
  still prefer so small letters, that are hard to read (compared to
  characters on a Windows screen).  Now I tried the most used commands
  like List, Read, Send Reply etc. All of them worked great. What I have
  found a bit strange, was that the message justification did not work
  in its message editor window. You see, I like my messages to be
  justified on both sides. I hope a solution for that problem will be
  found soon.


  Another issue with xfbbW client is that seems not to allow a multiple
  click onto more than one BBS callsign within pending forward list,
  comparing to WinFBB's behavior. You know, I am not very fond of
  opening the same pending forward window repeatedly again and again, in
  order to start (or to stop) more than one forwarding action.


  In general, I like xfbbW client. I hope to install some newer
  version(s) soon, and I hope some of its features will be upgraded and
  some new ones will be added in the future. What I would also like to
  have, is to activate the maintenance of the BBS (a "housekeeping"
  task) from that client's menu. Another thing I miss at the moment, is
  the absence of the xfbbW's help system. I mean of a real Windows help,
  because there's not much use of a Help menu, having only Copyright and
  About information :-))



  9.  How to compile LinFBB's executable  files


  9.1.  fbbsrc.704h (using Red Hat 7.1)

  2003-01-01


  Notice: Until recently, I preferred to download "factory-made"
  executables in RPM format (something like ZIP in MS Windows world).
  After getting a RPM package, a click on it activates the program that
  unpack and install its content. Well, it is great whenever your RPM
  has been "manufactured" for the very similar distribution of Linux you
  have. If not ...



  ·  Well, I have already had the package xfbb-7.04-2.i386.rpm (07
     August 2001), that was running OK under RH 6.2 distro. And not only
     that. Its "packer", Jose HI8GN, has explained that this package was
     actually compiled and linked with utilities that came with RH 6.2 -
     so under that distribution should be no problems at all.



  ·  One day I finally decided to abandon another 4-5 year old version
     of an X11 LinFBB application that I knew it would not run under Red
     Hat Linux newer than 6.2 distribution.  I decided to stay with
     LinFBB's daemon only, so it was also the right time to upgrade the
     Linux system itself. Another handy installation that I had, was RH
     7.1 and I used it. After finishing that task, I rushed to re-
     install the RPM package mentioned above (just to test if it would
     eventually work), but as expected it didn't want to run.



  ·  I had no choice but to browse web sites in order to find a RPM
     package that would fit my RH 7.1 distribution. Unfortunately, it
     looked that there was no one recompiled LinFBB RPM for 7.1 RedHat
     version. The only solution was to try with tarballs.  So, what I
     have downloaded from www.f6fbb.org/versions.html
     <http://www.f6fbb.org/versions.html>, was xd704h-src.tgz archive.



  ·  So far - so good. Well, folks, I am not very good of "deepest"
     secrets of Linux, so I was not sure where might be the best place
     to unpack the archive. According the readme file, it might be a
     "fbbsrc" directory, so I considered that /usr/src would be the best
     location to copy archive's fbbsrc.704h directory tree.



  ·  Well, the fbbsrc.704h directory consists of 12 files and 7
     subdirectories, one of which is src subdirectory. As the readme
     suggested a user to "goto fbbsrc/src" directory, I concluded that
     /usr/src/fbbsrc.704h/src was the right place.



  ·  The readme also suggested to "update the variables" at the
     beginning of Makefile files, but I did not do that because I was
     not sure what exactly should be put in there. So I have just left
     the file(s) intact.



  ·  The next task was to run make command from the shell and it took
     half a minute to be finished. The results were several xfbb
     executable files that I quickly moved to /usr/sbin directory. BTW,
     some people rather suggest to run make install (instead of make),
     in order to avoid multiple copying of compiled executables, but I
     found that way as not functional.



  ·  Soon after, I tried to activate xfbbd - the new LinFBB's daemon and
     it seemed to work without visible difficulties.  Using a home LAN
     including a Windows laptop, I also started fbbW - a LinFBB Windows
     client. It recognized the daemon in a second and I've only noticed
     that there was no Protus password utility running.



  ·  According the readme, the next task should be to "compile the xfbbC
     client". That operation should be done from a place called
     "fbbsrc/client" but the only available directory under
     /usr/src/fbbsrc.704h/src was X11.



  ·  After clicking on its icon, I recognized the second one file named
     Makefile (they have mentioned "updating" of both Makefile files, so
     I hoped to reach the proper place once again, regardless of two
     unfamiliar paths). Besides that, they have also suggested to use
     "at least the version 2.1.37b of ax25-utils" and I found not to
     have something like that installed (in the case they have possibly
     meant of a suit of libax25, ax25apps and ax25tool - than it should
     be OK). Anyway, then I activated make command from the shell one
     more time and the result was in getting xfbbC executable.



  ·  As usual, xfbbC client is to be invoked from within an xterm (or
     similar) command line environment. It also seemed that it was fully
     functional. So far - so good.



  ·  The next issue was to "compile the xfbbX client", but this time a
     user was requested to have a version of Motif installed. Well, what
     I already knew was that I haven't had any Motif software in the
     box, but a couple of Lesstif RPM packages were somewhere around. I
     installed them using --force and --nodeps options in order to avoid
     various dependency 'obstacles'. In sum, Lestiff stuff has come to
     its place on the hard disk.



  ·  This one time, I did make some "updates" related to Makefile paths
     and tried to run make command from the shell (for the 3rd time
     now). At the first sight, it seemed that I got no answer, because
     there appeared neither xfbbX nor xfbbX_cl executables. In order to
     "make" missing files, I just copied the appropriate executables
     from an earlier LinFBB version (which I backup-ed before).



  ·  Finally, I managed to activate xfbbX client without visible
     problems, although I knew it was not an up-to-date version
     (compared to the daemon itself). Regardless of that detail, the GUI
     client worked properly.



  ·  As I just mentioned, I also noticed that the first console
     connection was without familiar {PROTUS-4.1b7} designation (that
     means there was no c_filter utility running). So, I had to check
     and double-check all the paths and system directories, described in
     the Protus section of this mini-HOWTO. At the first sight, it
     looked to me that everything was fine, but the utility was not
     likely to start. Finally, I copied its main executable into yet
     another system location: /usr/lib/fbb/filter, re-started the system
     once again and Protus returned back to its function.



  ·  That was all. I am satisfied with what I have done for the first
     time.  What I have to do in the future, will be to check if the
     procedure described in this section was the right one, although
     most of the BBS's main features seemed to be active (just like as
     if they were running under RH 6.2 distribution using LinFBB
     packages in RPM format mentioned earlier). The only "mystery" was
     how to activate some system administering tasks: maintenance (a
     "housekeeping"), get user's data and other tasks easily accessed
     from under WinFBB main console (for example). Until now I haven't
     solved that, but that is not a real problem because I can also run
     WinFBB whenever my Windows is active, and from there I can perform
     sysop's tasks, using a mouse click or like.
  9.2.  fbbsrc.704j (using Red Hat 7.1)

  2004-01-03


  Notice: The other day I tried to upgrade my Red Hat 7.1 distribution
  to Red Hat 9.0 - in order to get more up-to-date system, being also
  capable to be upgraded from its original Netscape 4.76 browser to
  Netscape 7.1 (In fact, the more newer Netscape I need for other
  purposes - not related to FBB stuff at all - but I have not succeeded
  to perform a kind of a 'browser-only' upgrade (In fact, Netscape 7.1
  needs newer Glibc and some other things not easily being upgraded
  within under Red Hat 7.1). That's why I decided to upgrade the
  complete Linux system - i.e. not just reinstalling it Netscape
  Messenger email directory tree etc). So, at first, I made cca.  450 MB
  of free space on my / partition, hoping that would be enough to
  upgrade. But, RH 9.0's setup asked for even more 400 MB - that I
  couldn't made. Then I tried to make a 'fresh' installation of RH 9.0
  and it also looked that I had better supply a larger hard disk
  (besides that, it seemed that RH 9.0 performed a bit slower on my
  system than the old RH 7.1). Finally, I made a decision to re-install
  RH 7.1 again.


  After I did it, one of the first tasks to do was to install LinFBB. I
  took some browsing in order to find something newer than that
  fbbsrc.704h and I've got fbbsrc.704j tarball from
  ftp://www.f6fbb.org/pub/f6fbb/distrib/linux/src
  <ftp://www.f6fbb.org/pub/f6fbb/distrib/linux/src>



  ·  At first, I extracted .tgz package to the /usr/src directory.
     fbbsrc.704j consists of 7 subdirs and 12 files.  According to its
     readme, at the beginning I should 'goto fbbsrc/src directory' so I
     went to /usr/src/fbbsrc.704j/src



  ·  The readme also suggested to "update the variables" at the
     beginning of Makefile files, but I just left the file(s) intact.



  ·  The next task was to run make command from the shell and it took
     almost two minutes to be finished. The result was new xfbb
     executables (clr_user, epurmess, epurwp, fbbgetconf, maintinf,
     reqdir, xfbbC and xfbbd) that I quickly moved to /usr/sbin
     directory.



  ·  Then I copied fbb.conf (previously backup-ed) as well as other
     config stuff that should go to /etc/ax25/fbb directory.  I have not
     created new directories LinFBB should use as a and a 'data tree' -
     all of which suggested by /usr/src/fbbsrc.704j/FBBTREE file. If I
     haven't copied my backup-ed fbb.conf (that, in turn, has been
     configured to share config files with my WinFBB on a spare FAT16
     partition) and if I wanted to activate LinFBB's daemon before
     copying my particular fbb.conf - then I had to create those FBB-
     trees. In opposite, LinFBB couldn't run.



  ·  Soon after, I tried to activate LinFBB's daemon and it seemed to
     work without visible difficulties (using a temporary home LAN with
     a laptop, I performed telnet xfbbd_IP_address 6300, from Windows'
     utility Command Prompt. It recognized the daemon in a second and
     I've only noticed that there was no Protus password utility
     running). The latter I solved by copying
     /var/ax25/fbb/protus/c_filter file to a location
     /usr/lib/fbb/filter and re-starting LinFBB. To make more tests, I
     have also installed xfbbW (Windows client for LinFBB). It also
     worked fine.



  ·  According the readme, the next task should be to "compile the xfbbX
     client". That operation is to be performed from a place called
     "fbbsrc/client" but the only sub-directory available under
     /usr/src/fbbsrc.704j/src was X11 subdir.  I went there, but before
     trying to activate make again, I also installed a couple of LessTif
     RPM packages of version 0.93.18-1 (lesstif, lesstif-mwm, lesstif-
     devel and lesstif- clients). In fact, I haven't had a version of
     Motif to be installed.



  ·  Once again, I did not make "updates" related to Makefile paths and
     just tried to run make from the shell (for the 2nd time now). In a
     half a minute, I got two new executables: xfbb and xfbbX_cl. I also
     copied them to /usr/sbin directory, accompanied with xfbbX shell
     script. The difference to the older version 704h was that this time
     I haven't had to apply the GUI client executables from an earlier
     version I have backup-ed previously. That means, I could be sure
     now that both server and client parts of LinFBB are of the very
     same version.



  ·  Then I entered /usr/sbin/xfbbX and soon after XFBB Setup screen
     appeared, asking to enter the Callsign and Password. From the Help
     menu, I checked for About and Copyright and I was satisfied when
     noticed that it was 7.04j version of the Linux GUI client.



  9.3.  fbbsrc.704j (using Red Hat 9.0)

  2004-01-05


  Notice: Although I managed to compile all parts of the newest LinFBB
  version, I was not so happy because my Linux platform was still the
  old one: Red Hat 7.1 and I wanted to have 9.0 version.  That's why I
  started planning what to do with the things intended to be backup-ed
  before the another fresh installation of Linux. The main trouble were
  the existing Netscape 4.76 email folders, because it was obvious that
  the 4.76 directory structure greatly differ from Netscape 7.1 folder
  tree. In fact, a user of Netscape 4.76 email only has to make a backup
  copy of the hidden .nsmail directory that, in turn, has to be restored
  into the same location after the eventual next re-installation of the
  Red Hat 7.1 distribution. That is a simple task to do. But, the
  problem with newer Netscape 7.1 was that it has the different
  directory tree when compared to its predecessor, in addition to a
  slightly changed email structure. In fact, I tried to use Netscape
  4.76's .nsmail directory with the fresh Netscape 7.1 installation and
  that just didn't want to run properly. Than I looked for another way
  to accomplish that task and here is how I did it.



  I already knew that Netscape and Mozilla software (in particular the
  newer one versions of them) converge in a way they seem to use a
  similar or the very same "engine" as well as the directory structure.
  Having in mind that the newer Red Hat 9.0 distribution have not
  offered any version of Netscape software at all and that Mozilla
  packages remained in the newer Red Hat's - I decided to perform the
  following steps:


  1. to make a simple upgrade from Red Hat 7.1 to Red Hat 9.0 (in order
  to keep the original Netscape's 4.76 .nsmail directory structure
  intact, but to get an up-to-dated version of Mozilla which comes with
  this particular Red Hat upgrade and that is the same as Mozilla after
  the 'fresh' installation of RH 9.0);


  2. to make an import of the existing email from Netscape 4.76 to
  Mozilla (interestingly, the new Mozilla only supports an import from a
  "Netscape 4.x");


  3. to make a backup copy of the new Mozilla's directory structure;


  4. to make a 'fresh' installation of Red Hat 9.0 (in order to ensure
  the stable environment that, in turn, will also have the same new
  Mozilla);


  5. to make a 'restore' of Mozilla's directory structure (previously
  backup-ed);


  6. to install the new Netscape 7.1 that, as mentioned, will use the
  same directory structure as the new Mozilla;


  7. to have a choice: to run either Netscape or Mozilla (if you get
  bored from either of them :-)).


  Well, these steps were the nice mental exercise, but finally I got
  them all running as I wanted. After I got sure that the Internet email
  and browsing capabilities of my new Red Hat 9.0 became OK, I got to
  the beginning of LinFBB installation procedure. Now I am not going to
  repeat the items from the previous LinFBB sub-section, but what I
  would like to say is that the step 4. (a couple of paragraphs above)
  have not brought some X Window development packages, needed for
  compiling of xfbbX. I mean, once again I managed to compile xfbbd and
  xfbbC without problems, but a make of xfbbX haven't produced the
  result I expected. In fact, it returned something like this:



  [root@localhost X11]# make
  gcc -Wall -Wstrict-prototypes -O2 -g -funsigned-char  ...
  In file included from ../../include/xfbb.h:34,

  ...
  ...

  xfbbabtd.c: In function `DisplayInfoDialog':
  xfbbabtd.c:428: warning: comparison between pointer and integer
  make: *** [xfbbabtd.o] Error 1
  [root@localhost X11]#



  I was advised by the friendly FBB-hams that obviously something of the
  X Window development stuff have been missing, so I started to explore
  the RPM's I already have installed:



       [root@localhost root]# rpm -qa *lesst*
       lesstif-devel-0.93.18-1
       lesstif-clients-0.93.18-1
       lesstif-mwm-0.93.18-1
       lesstif-0.93.18-1
       [root@localhost root]#



  ·  As long as I know, all these lesstif packages don't belong to
     either Red Hat 7.1 nor 9.0 distribution.  I have probably
     downloaded them as a '3rd party' software.  Besides that, I also
     noticed that Red Hat 9.0 installation CD's do include the
     following:



             lesstif-0.93.36-3.i386.rpm
             lesstif-devel-0.93.36-3.i386.rpm
             openmotif21-2.1.30-8.i386.rpm
             openmotif-devel-2.2.2-14.i386.rpm



  ·  Well, a nice try to 'upgrade' to lesstif-0.93.36-3.i386.rpm ended
     up with an error report on the conflicts with the existing
     lesstif-0.93.18-1 - so I gave up;



  ·  Then I entered a 'loop' of failed dependencies as follows:



        lesstif-devel-0.93.36-3.i386.rpm required
        XFree86-devel and lesstif = 0.93.36

        XFree86-devel-4.3.0-2.i386.rpm required
        fontconfig-devel and pkgconfig

        fontconfig-devel-2.1-9.i386.rpm required
        freetype-devel >= 2.1.2-7



  ·  Then the following stuff got installed without complaints:



       [root@localhost root]# rpm -i freetype-devel-2.1.3-6.i386.rpm
       [root@localhost root]# rpm -i fontconfig-devel-2.1-9.i386.rpm
       [root@localhost root]# rpm -i pkgconfig-0.14.0-3.i386.rpm
       [root@localhost root]# rpm -i XFree86-devel-4.3.0-2.i386.rpm



  ·  Well, at this point I tried to recursively install
     lesstif-0.93.36-3.i386.rpm once again but it conflicted with the
     existing lesstif-0.93.18-1 - so I gave up once again;



  ·  While pulling out the remaining hair, I just tried another make
     within the X11 directory and ...  Bingo! ... xfbbX finally got
     compiled! Only God knows which one of the packages above was/were
     the missing part(s). Case some of you knows, please let me know.



  ·  And, as they said: ... and after all that had happened, what
     remained has just gone to a legend ... :-)



  What remains to be explored (at least for me) is to see how to
  maintain various sysop's tasks (ex. how to execute 'housekeeping'
  mechanism by a mouse click or like) - from within xfbbX.  Any
  suggestion is welcomed (it may also be a contribution for the next
  release of this mini-HOWTO, hams!).



  10.  How to access the "xfbbd" server from a DOS client?

  Notice: In some of the previous chapters, I announced my plans to use
  an old i286/12 MHz box, having only 1 MB of RAM, running DOS 5.0, as a
  card so I would like to 'connect' to the BBS from that one 'telnet
  client' box. If that succeeds, it would be a good preparation for
  installing another LinFBB (in the local school club), where several
  old 286 computers will be also available. It would be nice to offer
  more than one student-amateur the opportunity to 'connect' the BBS
  simultaneously, using a bunch of vintage


  10.1.  NCSA Telbin DOS client

  2003-06-30


  First of all, I have been looking for networking software that does
  not require much of hardware resources. Several hams keep advising me
  to try this or that way, but Jose, CO2JA, sent me his distribution
  copy of NCSA Telnet utility.  According to its own howto document,
  that is actually a "NCSA Telbin DOS client", being "used at The
  University of Port Elizabeth  (Sep '94)". So far about software's
  earlier "official" usage.


  Well, it seems that NCSA TCP/IP kernel only runs on packet drivers
  now. That's why I looked for appropriate packet drivers for my old ISA
  network card, equipped with the UMC's UM9003AF chip. CZ20000.COM
  packet driver seemed to be the most suitable one.


  Before implementing the driver I also needed the proper diagnostic
  utility to check and/or modify NIC's IRQ and I/O address in order to
  avoid possible hardware conflicts (you know, under DOS it is less
  easier to resolve interrupt hardware conflicts case a user has several
  ISA cards that are not of P'n'P type /as PCI cards are/). It seemed
  that DIAG.EXE ("The Ethernet Adapter Diagnostic Program, Ver. 2.13" -
  that comes with E1000 and E2000 series Ethernet cards) was fully
  capable to handle my card's parameters, so I choose the values of IRQ
  5 and I/O 320 that weren't occupied by other resources.


  Then I could execute the following DOS command:



            cz2000 0x60 5 0x320



  in order to activate the NIC.


  Now the configuration file CONFIG.TEL should be modified in order to
  satisfy my particular needs, including local (DOS client) and remote
  (Linux server) IP addresses etc. In a couple of minutes that was
  finished so the main executable TELBIN.EXE successfully started
  running on my old 286 DOS box.


  If you want, you may put cz2000 0x60 5 0x320 and telbin commands into
  a dedicated TELNET.BAT file in order to make your telnet utility
  easier to activate. Should you plan to use your old DOS box for only
  accessing the Linux FBB server, both lines may be added to the
  AUTOEXEC.BAT start up file.


  10.2.  Xrouter 176b

  2003-07-20

  A "YL" (the amateur "young lady") from the UK, Paula Dowie G8PZT, has
  suggested me to try her own product, XROUTER MULTI-PROTOCOL ROUTER,
  that is "an AX25 and IP packet router for the amateur packet radio
  network, using a standard PC and DOS". Actually, it seems that Xrouter
  has much more functions that I need now, but anyway it was intriguing
  to test its features, in order to connect LinFBB via LAN. Paula said
  that "Xrouter http://pzt.org.uk/software/software.htm
  <http://pzt.org.uk/software/software.htm> will run on a 286 DOS
  machine, and will act as a telnet client". She added that, Xrouter's
  "outgoing text is composed in a one line buffer, so the receive window
  is only 22 lines".

  According to Paula's email signature, seems she's very active in
  helping to the amateur digital radio activities:



       > Packet:   G8PZT @ GB7PZT.#24.GBR.EU  (44.131.91.2) [Kidderminster]
       > Email:    g8pzt@blueyonder.co.uk                                   _/\_
       > GB7PZT:   01562-745527 24h 300-33,600 8,n,1                        ()
       > Software: XServ BBS, Xrouter, PEARL off-line-reader.                />
       > Web Site: www.pzt.org.uk   (also www.qsl.net/g8pzt)          ===>--->>\----
       > Telnet:   (BBS): gb7pzt.dyndns.org:88  and 44.131.91.2:23
       > Telnet:   (KIDDER): g8pzt.ath.cx and 44.131.91.245
       > HTTP:     http://g8pzt.ath.cx/ and http://44.131.91.245



  So, I went to visit the site to see what it was about and to download
  the package. There were two compressed files, rout172.zip and
  rout176c.zip so I decided to get both of them (the latter is the newer
  one, 28/7/02 but the other one is also not so old, 15/11/01).


  According to sysop's manual XROUTER.TXT the ethernet driver allows
  connection with Windows, Linux, NOS and BPQ. At the moment I am
  primarily interested in connections to LinFBB (and maybe to WinFBB
  too).  Xrouter's hardware requirements include at least one COM port
  or Ethernet card and I used only the Ethernet card for the first time
  because I am not going to use Xrouter for anything else but for
  accessing LinFBB over my home network.

  As described in the previous section, related to "NCSA Telbin DOS
  client", I have managed to activate my NIC using the command:



            cz2000 0x60 5 0x320



  After doing that, there was a requirement to use the software
  component ETHDRV.EXE (supplied with Xrouter), like this:



            ethdrv 125



  where "125" stands for a software interrupt in the range 60 - 127 (125
  is used as an example that, BTW, works here without any problem). On
  the other side, the same software interrupt must be defined as the
  INTNUM parameter, that is a part of the INTERFACE block within
  XROUTER.CFG configuration file.


  And, finally, there was a command:



            xrouter



  to activate the main executable. As mentioned before, all three lines
  above may be incorporated into an XROUTER.BAT (or whatever similar)
  batch file to make user's life easier.


  Well, although in my case the first two lines responded in positive
  manner, the last one rather suggested that I had some errors in the
  configuration.  The nice thing is that errors are reported with a
  detail such the exact line of XROUTER.CFG where an error is made. In
  fact, Xrouter is able to support lots of various "ports" and has a
  plenty of other features, so it was not easy to solve the config
  issues I faced to. With some help from other hams I managed to adapt
  the following configuring blocks:



       INTERFACE=8
           TYPE=EXTERNAL
           PROTOCOL=ETHER
           MTU=1600
           INTNUM=125
       ENDINTERFACE



  and



       PORT=6
           ID=Ethernet LAN
           INTERFACENUM=8
           CHANNEL=A
           FRACK=1000
           RESPTIME=200
           MAXFRAME=7
           PACLEN=240
       ENDPORT



  So far, so good. Now I got Xrouter's main screen from where I could
  enter telnet and other commands. But I was still not able to connect
  to the LinFBB.  Finally, I got the suggestion to reconfigure another
  Xrouter's system file, IPROUTE.SYS. It seemed that the missing part
  was to change the default route, as follows:
       route default 6 * d



  Then I became capable to access my LinFBB server.



  11.  How to communicate with LinFBB in Serbian?

  2003-08-01


  Gentle folks, I am a Serb and I live in Serbia.  My language is
  Serbian and I communicate with FBB in that language. If you like to
  expand the language capabilities of your LinFBB (and-or WinFBB too), I
  include two system language files: SRPSKI.HLP and SRPSKI.TXT for your
  convenience. As you can see, the files are in the Latin alphabet
  although I would like to have them in the Cyrillic too. Case some of
  you have ideas or links on how to manage that, you are welcome to
  help.



  11.1.  SRPSKI.HLP

  =====BOF=====



  ##############################
  # SRPSKI.HLP for FBB 7.00g   #
  #    (Serbian help file)     #
  # by Misko,YT7MPB   02Jul99  #
  ##############################


  #################
  # -1 za goste   #
  #################


  @@ -1 ?

  Imate ograniceni izbor naredbi:

  B  : bye-diskonekt
  H  : ovaj tekst
  KM : brise sve PROCITANE poruke za vas
  LM : ispis naslova SVIH poruka za vas
  O  : izbor opcija (jezik,stranice..)
  RM : cita sve poruke za vas
  RN : cita sve NOVE poruke za vas
  S  : upucuje poruku (SEND)
  T  : poziva SysOp-a

  ###################
  # 0 je za SERVER  #
  ###################

  @@ 0 ?

  *** nema takve naredbe !!!

  C : statistika konektovanja
  D : dokumentacija i informacije
  Q : QTH lokatori
  N : adresar stanica (CALLBOOK)
  T : sateliti i njihove putanje
  F : povratak u BBS mod
  B : diskonekt iz bbs-a

  Upisite: ? <slovo> za detaljniju pomoc  (na pr.. ? T )

  @@ 0 C

  Konekt-statistika
  -----------------
  Razne statistike o upotrebi servera, liste i slicno.

  @@ 0 D

  Informacije
  -----------

  U ovom delu mozete pronaci razne informacije i dokumentaciju ako postoje.
  Naredbe su brojcane.


  @@ 0 N

  Adresar
  -------

  Ovde se nalaze informacije koje su korisnici bbs-a ostavili o sebi.
  (ime, adresa, telefoni, ...).
  Mozete upisati i svoje podatke ....(preporucujemo).

  @@ 0 Q

  Lokatori
  --------
  Razni proracuni vezani uz lokator (iz koordinata u LOC, iz LOC u koordinate,
  QRB, sumirajuci QRB vise lokatora, azimuti...).

  @@ 0 T

  Putanje satelita
  ----------------
  Proracun putanja, orbitalnih parametara, karakteristike raznih satelita
  (ukoliko za njih postoje podaci).

  @@ 0 F

  Povratak u BBS
  --------------

  Naredbom: F <enter> se mozete vratiti nazad u BBS mod.

  @@ 0 B

  Bye - diskonekt
  ----------------

  Naredbom: B <enter> prekidate QSO sa bbs-om.

  ###########################
  # QRA-locator server is 2 #
  ###########################


  @@ 2 ?

  *** nema takve naredbe !!!

  Q : proracun koordinata iz lokatora,
  L : proracun lokatora iz koordinata,
  D : proracun QRB i azimuta izmedju dva lokatora,
  C : sabiranje QRB izmedju pocetnog LOC i vise drugih lokatora,
  F : povratak u server meni,
  B : diskonekt iz bbs-a.

  Ukucajte: ? <slovo> za detaljniju pomoc (na pr.. ? L).

  @@ 2 Q

  naredba Q
  ---------

  Izracunava koordinate iz lokatora. Rezultat je u stepenima/min. i gradima.
  Gradijani nam bas i nisu zanimljivi pa zavisno od jezika se nece ni ispisati.

  @@ 2 L

  naredba L
  ---------

  Izracunava lokator iz koordinata. Koordinate se mogu uneti u decimalnim
  stepenima, stepen./min. i gradijanima.

  Primer unosa u stepenima i minutima:   1:45:00 (smer)

  Ovaj smer zamenite sa Sever, Jug, Istok, Zapad prema potrebi. Pazite da
  prvo slovo bude VELIKO, na pr.. 1:45:00 Sever

  @@ 2 D

  naredba D
  ---------

  Izracunava QRB i azimut izmedju dva lokatora. QRB je u km, azimut u stepenima.

  @@ 2 C

  naredba C
  ---------

  Sabira izracunate QRB. Nakon unosa polaznog LOC svi sledeci QRB se nakon
  proracuna dodaju ukupnoj sumi km.

  Ako nemate digitron ili racunar mozete ovde izracunati rezultate contesta :))

  @@ 2 F

  naredba F
  ---------

  Vraca vas nazad u SERVER mod pa mozete probati neki drugi modul servera.
  Ako ponovo posaljete F <enter> vracate se u BBS mod.

  @@ 2 B

  naredba B
  ---------

  Prekidate vezu bez vracanja u BBS mod.

  ###################
  # STATISTICS is 3 #
  ###################


  @@ 3 ?

  *** nema takve naredbe !!!

  O : zauzeca na bbs-u u %,
  G : opsta statistika bbs-a,
  L : spisak konektovanih stanica,
  H : graficki prikaz dnevne upotrebe bbs-a,
  J : graficki prikaz nedeljne upotrebe bbs-a,
  I : spisak svih stanica koje su do sada bile u bbs-u,
  F : povratak u SERVER-MENI,
  B : diskonekt iz bbs-a,

  Ukucajte: ? <slovo> za detalje o nekoj naredbi ( na pr..  ? L).

  @@ 3 O

  naredba O
  ---------

  Procenat upotrebe raznih resursa servera, mailbox-a i DOS modula.

  @@ 3 G

  naredba G
  ---------
  Opsta statistika servera (broj poruka, konekta, vremena...)

  @@ 3 L

  naredba L
  ---------

  Konekt lista. Za  svaki  konekt  ispisuje  se: port, znak, pocetak i vreme
  trajanja konekta. Lista se daje unazad, a ispis se prekida sa A.

  @@ 3 H

  naredba H
  ---------

  H       : graficki prikaz upotrebe BBS-a po satima od 00 - 24h,
  H CALL  : graficki prikaz upotrebe BBS-a od strane CALL. Moguci su i "dzoker"-
            znaci.Na pr. H YU7* ce dati ispis za sve YU7 stanice koje su bile tu.

  @@ 3 J

  naredba J
  ---------

  J       : graficki prikaz upotrebe BBS-a po danima u sedmici od Pon do Ned,
  J CALL  : graficki prikaz upotrebe BBS-a od strane CALL. Moguci su i "dzoker"-
            znaci.Na pr. J YU7* ce dati ispis za sve YU7 stanice koje su bile tu.

  @@ 3 I

  naredba I
  ---------

  I        : abecedni spisak stanica koje su koristile BBS. Moguci su i
             "dzoker"-znaci.Na pr. I YU7* ce dati listu svih YU7 stanica.


  @@ 3 F

  naredba F
  ---------

  Vraca vas nazad u SERVER-MENI pa mozete da probate neki drugi modul servera.
  Ako ponovo posaljete: F <enter> vracate se u BBS mod.


  @@ 3 B

  Bye - diskonekt
  ----------------

  Naredbom: B <enter> prekidate vezu, bez potrebe da se vracate u BBS mod.


  ######################
  # DOCUMENTATION is 4 #
  ######################

  @@ 4 ?

  Dokumentacija
  -------------

  Da bi procitali neki tekst sa liste samo upisite njegov broj.
  Nove stvari se upisuju putem NEWDOC servera iz BBS-a (? NEWDOC).

  L ispisuje listu fajlova.

  Sysop: OPIS se moze menjati D naredbom ( na pr.. D BBS.DOC opis).

  @@ 4 F

  naredba F
  ---------

  Vracate se nazad u SERVER-MENI pa mozete probati neki drugi modul servera.
  Ako ponovo posaljete: F <enter> vracate se u BBS-mod.

  @@ 4 D

  naredba D (samo za SysOp-a)
  --------------------------

  Izmena opisa dokumentacionih fajlova.

  @@ 4 L

  naredba L
  ---------

  Daje spisak postojecih tekstova.

  @@ 4 R
  ------

  naredba R
  ---------

  Ako ste otisli u neki od DOCS poddirektorijuma sa R se vracate na raniji DIR.

  #####################
  # NOMENCLATURE is 5 #
  #####################



  @@ 5 ?

  *** nema takve naredbe !!!

  N : promena licnih podataka: imena, adrese...,
  R : pretrazuje bazu za podacima o nekoj stanici,
  I : lista konektovanih znakova,
  F : povratak u server meni,
  B : diskonekt iz bbs-a.

  Ukucajte: ? <slovo> za detalje o naredbi (na pr..  ? N ).

  @@ 5 N

  naredba N
  ---------

  Ako nema podataka o vasem imenu, adresi, tlf ili su netacni, mozete ih
  uneti ili menjati ovom naredbom.

  Ukoliko na pitanje odgovorite sa razmakom ili <RETURN> nece se promeniti
  taj podatak.

  Ukoliko je sve OK, samo odgovorite slovom N na (D/N) pitanje.

  SysOp : sysop moze menjati podatke korisnika naredbom N CALL.
  @@ 5 R

  naredba R
  ---------

  Pretrazuje bazu podataka u potrazi za podacima o nekom pozivnom znaku.
  Na pr. R YU7APV <enter>.

  @@ 5 I

  naredba I
  ---------

  Abecedni popis stanica koje su do sada konektovale ovaj BBS.

  @@ 5 F

  naredba F
  ---------

  Vraca vas nazad u SERVER-MENI pa mozete probati neki drugi modul servera.
  Ako ponovo posaljete: F <enter> vracate se u BBS.

  @@ 5 B

  Bye - diskonekt
  ----------------

  Naredbom: B <enter> prekidate vezu, bez potrebe da se vracate u BBS mod.

  #######################
  # TRAJECTOGRAPHY is 6 #
  #######################

  @@ 6 ?

  *** nema takve naredbe !!!

  T : izracunava putanju/polozaj nekog satelita,
  P : prikazuje orbitalne parametre,
  C : karakteristike amaterskih satelita,
  F : povratak u server meni,
  B : diskonekt iz bbs-a.


  Posle naredbi C, P i T mozete da upisete L za SPISAK satelita.

  Ukucajte ? <slovo> za detalje o nekoj naredbi ( na pr..  ? C ).

  @@ 6 T

  naredba T
  ---------

  Izracunava putanju satelita. Nakon sto ste odabrali satelit za koji zelite
  proracun morate uneti datum i vreme za koje zelite podatke. Svi podaci su
  bazirani na vasem lokatoru ukoliko ste ga upisali inace se racuna prema
  lokatoru ovog bbs-a.

  Za popis satelita upisite L <enter>.

  @@ 6 P

  naredba P
  ---------

  Ispisuje orbitalne parametre satelita koji se koriste u proracunima.

  Za popis satelita upisite L <enter>.

  @@ 6 C

  naredba C
  ---------

  Daje karakteristike i informacije o izabranom satelitu.

  Za popis satelita upisite L <enter>.

  @@ 6 F

  naredba F
  ---------

  Vraca vas nazad u SERVER-MENI pa mozete probati neki drugi modul servera.
  Ako ponovo posaljete: F <enter> vracate se u BBS-mod.


  @@ 6 B

  Bye - diskonekt
  ----------------

  Naredbom: B <enter> prekidate vezu bez potrebe da se vracate u BBS-mod.

  ###############
  # 9 is DosFBB #
  ###############

  @@ 9 ?

  Moguce naredbe u DosFBB delu su:

  ? i HELP     : ovaj tekst,
  O            : opcije (stranice po liniji, bazni broj...),
  BGET         : Autobin download,
  BPUT         : Autobin upload,
  DIR          : ispis sadrzaja direktorijuma (LIST je daleko bolja)
  DU           : disk usage - spisak DOS dir's sa pojedinacnim zauzecem,
  EDIT         : editovanje fajla,
  GET          : download (ispis) tekst fajla,
  PUT          : upload (upis) tekst fajla,
  CD           : promena direktorijuma,
  COPY         : kopiranje fajla,
  DEL          : brisanje fajla,
  MD           : napravi direktorijum,
  RD           : obrisi prazan direktorijum,
  XGET         : XMODEM download (tel. modem),
  XPUT         : XMODEM upload (tel. modem),
  X1GET        : 1k-XMODEM download (tel. modem),
  YGET         : YAPP download (ili YMODEM via tel. modem),
  YPUT         : YAPP upload,
  ZGET         : ZMODEM download (tel. modem),
  TYPE         : ispis ASCII fajla sa paginacijom,
  LIST         : ispis fajlova sa kratkim opisom ako postoji,
  PRIV         : odlazak u posebni, privatni direktorijum,
  VIEW         : pogled u sadrzaj arhiviranih fajlova (ARJ, ZIP, LZH, ARC),
  WHERE file   : pretraga po disku za fajlovima,
  NEW          : ispis novih fajlova od zadnje primene NEW,
  EXIT,F i QUIT: povratak u BBS-mod,
  B            : diskonekt iz bbs-a.

  Diskove mozete menjati kao i u DOS sa A:,C:,D: (ukoliko postoji vise diskova)

  Za detalje ukucajte ? <naredba>    (na pr..  ? WHERE).

  @@ 9 HELP

  naredba HELP
  ------------

  Ispisuje spisak svih raspolozivih naredbi u DosFBB delu.

  @@ 9 B

  Bye - diskonekt
  ----------------

  Naredbom B <enter> prekidate vezu bez potrebe da se vracate u BBS-mod.

  @@ 9 CD

  naredba CD
  ----------

  Koristi se za promenu direktorijuma, na pr.. CD \YAPP. Za "natrag" jedan dir
  koristite naredbu: CD <enter>.

  @@ 9 COPY

  naredba COPY
  ------------

  Sluzi za kopiranje fajlova. (na pr..  COPY TEST.TXT TEST2.TXT)

  Kopiranje preko vec postojeceg fajla nije dozvoljeno (greska).

  @@ 9 DEL

  naredba DEL
  -----------

  Sluzi za brisanje fajlova. Mozete obrisati SAMO fajlove koje ste vi poslali.

  @@ 9 DIR

  naredba DIR
  -----------

  DIR prikazuje sadrzaj direktorijum,a bilo onog u kojem ste sada bilo drugog
  ako unesete punu putanju ("path") na pr. DIR \YAPP.

  "Dzokeri" su dozvoljeni, na pr.. DIR *.SYS

  @@ 9 DU

  naredba DU
  ----------

  DU (Disk Usage) ispisuje zauzet/slobodni prostor na disku.

  @@ 9 EDIT

  naredba EDIT
  ------------

  Sluzi za editovanje (ispravku) tekst fajlova. Nakon njene primene ulazi se
  u poseban editor sa malom grupom posebnih naredbi, sto je previse pa ne bi
  dalje o ovome ....

  @@ 9 EXIT|QUIT|F

  naredbe EXIT,QUIT i F
  ---------------------

  Sve znace isto: izlaz iz DosFBB nazad u BBS-mod.

  @@ 9 GET

  naredba GET
  -----------

  Ovo upotrebite ako zelite da preuzmete/procitate neki TEKST fajl sa BBS-a.
  Ispis je kontinuiran. Na pr. GET PHONE.BBS.

  Pazite, neki fajlovi nisu tekstualni i ova naredba nije za njih. Tacnije,
  dobijate cudne znakove na ekranu ako probate GET sa NE-tekstualnim fajlovima.

  @@ 9 LIST

  naredba LIST
  ------------

  Daje spisak fajlova (kao i DIR), ali uz njih ispise i kratki opis ukoliko
  postoji.

  @@ 9 MD|MKDIR

  naredba MD ili MKDIR
  --------------------

  Pravi novi direktorijum unutar onoga u kojem se koristi. Na pr MD TEST.
  Nema svrhe da se ovo proba, osim uz dobro objasnjenje SysOp-u (hi)...

  @@ 9 NEW

  naredba NEW
  -----------
  Vrlo zgodno jer vam daje spisak SVIH NOVIH fajlova u SVIM direktorijumima od
  kako ste poslednji put dali NEW. Koristite je kad udjete u DOS, lakse je nego
  DIR "okolo-naokolo".

  @@ 9 O|OL|ON|OR|OP|

  naredba O
  ---------

  Daje dosta raznih stvari:

  O <enter> ispisuje stanje ovoga ispod za vas slucaj,

  OP     - iskljucuje ispis po stranicama,
  OP br. - ukljucuje ispis po stranicama sa <br.> brojem linija po strani,
  OL     - spisak mogucih jezika za koriscenje u bbs-u,
  OL br. - prelazak na jezik <br.>,
  ON     - ispis osnovnog (pocetnog) broja za listanje poruka,
  ON br. - upis novog osnovnog (pocetnog) broja <br.>.
           To je broj koji se sabira sa onim sto upisete kod rada sa porukama.
           Kako je nezgodno kucati R 20002 postavite ON 20 (isto kao i ON 20000)
           i posle kucate samo R 2, a BBS vam cita poruku 20002 (20000 + 2, ok?)
  OR     - uklj/isklj citanje licnih poruka za druge korisnike,
  OM     - uklj/isklj mogucnost auto-listanja novih licnih poruka kod konekta.

  @@ 9 PUT
  naredba PUT
  -----------

  Sluzi za upis nekog vaseg tekst fajla u BBS. Ukoliko vec postoji isto ime,
  stari fajl se prvo mora obrisati (naravno, samo ako je to bio vas fajl).

  Na pr. PUT INFO.C64 snima u bbs fajl pod imenom INFO.C64

  @@ 9 PRIV

  naredba PRIV
  ------------

  PRIV naredba daje pristup u posebni direktorijum, samo vas ili jos neciji.
  To moze u dogovoru sa SysOp-om, ako ima mesta na hard disku.

  Takav DIR moze da postavi samo SysOp.

  @@ 9 RD|RMDIR

  naredba RD ili RMDIR
  --------------------

  Brise prazan direktorijum koji ste vi napravili.

  @@ 9 TYPE

  naredba TYPE
  ------------

  Daje ispis tekst fajla po STRANICAMA ukoliko tako zelite (vidi OP naredbu).

  @@ 9 VIEW

  naredba VIEW
  ------------

  naredbom VIEW moze se "pogledati" sta sadrzi neki arhivirani fajl.
  To su svi fajlovi sa: .ARJ .ZIP .LZH .ARC nastavcima.
  Primer: VIEW SP
  @@ 9 XGET|XPUT|X1GET|ZGET

  naredbe XGET, XPUT, X1GET, ZGET
  -------------------------------

  SAMO ukoliko BBS ima i telefonski modem-port i ako ste preko njega
  konektovani. One sa GET su za skidanje , a sa PUT za upis fajlova i to:

  XGET  - XModem
  X1GET - XModem-1k
  ZGET  - ZModem
  YGET  - YModem

  Upotreba je ista : naredba <ime_fajla>

  VAZNO: na BBS-u moze biti postavljen dozvoljeni dnevni limit u kb za preuzimanje.

  @@ 9 YGET|YPUT|BPUT|BGET

  naredbe YGET, YPUT, BPUT, BGET
  ------------------------------

  Koriste se za skidanje/slanje binarnih fajlova putem radio veze.

  YGET i YPUT za YAPP protokol (YAPP, TPK, PTM..)
  BPUT i BGET za Autobin protokol (SP, GP, Turbopacket..)
  YGET preko modema za YModem protokol

  Upotreba je ista : naredba <ime_fajla>

  VAZNO: na BBS-u moze biti postavljen dozvoljeni dnevni limit u kb za skidanje.


  Napomena: NE koristite YAPP ako nemate program sa "yapp resume" mod-om !!!

  ##################
  # BBS-mode is 14 #
  ##################

  @@ 14 A|ABORT

  (A)bort tj... prekid ispisa iz BBS-a.

  OK, ako ste poceli da citate nesto pogresno, ali uzmite u obzir sva kasnjenja
  kroz mrezu dok "A" ne stigne do BBS i prekine ispis....

  @@ 14 B

  B naredba vas diskonektuje iz BBS-a (uz jos neke podatke).

  Bitno je da samo tako izlazite iz BBS-a, a ne diskonektom jer ce vam samo tako
  ostati podesene nove vrednosti za naredbu L ("List").

  Ukoliko se veza prekine tako necete izgubiti poslednje stanje.

  @@ 14 C|CW

  CW naredba ispisuje stanice u konferenciji.

  C  naredba vas ubacuje u konferenciju tj... "bla-bla" okrugli sto u kojem sve
     sto pisete ide svima koji su takodje trenutno u konferenciji na bbs-u.

  U konferenciji sve naredbe pocinju sa tackom u prvoj koloni !!!

  .C[port] call [via digi1 digi2...] konektuje stanicu na portu,
  .H vam daje ovaj tekst,
  .W ispisuje prisutne stanice u konferenciji,
  .Q vraca vas iz konferencije nazad u BBS-mod.

  @@ 14 CB

     Pomocu naredbe CB CALL dobicete adresu za trazeni znak iz callbook-a
     sa CD ROM-a (kad ga budemo ugradili, hi), na pr.: CB YU7APV

  @@ 14 D|DOS

  Naredba ima dvostruko znacenje:

  1. Samo D bez argumenata vas prebacuje iz BBS u DOS mod. Tu mozete kao i na PC
     slati/skidati fajlove, kopirati, citati.....
     Paznja: DOS deo ima svoje, drukcije naredbe. Napravite HELP kada udjes u
     njega !

  2. D uz argument vam daje download nekog tekst fajla. Na pr D \yaesu\ft-411.mod
     i BBS ce vam poslati fajl FT-411.MOD iz  YAESU direktorijuma. U vezi ovog
     pogledajte i pomoc za W naredbu (?W).

  VAZNO: samo programi koji imaju uobicajene ekstenzije tipa: .TXT, .DOC, .INF
         se mogu normalno procitati. Svi ostali se moraju preneti posebnim
         nacinom (vidi pomoc za YAPP prenos).

  @@ 14 F
  F naredba vam daje pristup serveru i dodatnim mogucnostima.
  Server koristi sistem menija gde ulazite prvo u glavni meni.
  Za objasnjenja koristite uvek samo: ? <enter>.

  @@ 14 G

  G naredba daje pristup Gateway-u. Upotrebljivo tek kod BBS-ova sa
  vise portova na razlicitim frekvencijama.

  @@ 14 ?|H|HELP

  Spisak mogucih naredbi ili GRUPE naredbi (vise njih sa istim PRVIM slovom).

  A :(abort) - prekida ispisivanje necega,
  B :(bye)   - diskonekt,
  C :(conference) - ulaz u konferenciju (bla-bla vise stanica),
  CB: Trazenje adrese ARS sa CD ROM-a (ako je ugradjen CD citac),
  D :(DOS)   - ulaz u FbbDOS ili download fajla,
  F :(FBB)   - ulaz u server (adresar, sateliti, lokatori...),
  G :(gateway) - pristup drugim frekvencijama BBS-a (ako postoje),
  H :(pomoc) - tekst za pomoc kad vam zatreba,
  I :(info)  - info o sistemu ili grupa naredbi White Page servera,
  J :(jheard)- spisak nekoliko poslednjih konektovanih/slusanih stanica,
  K :(kill)  - brisanje poruka,
  L :(list)  - listanje poruka,
  M :(make)  - kopira poruku/bilten u fajl,
  N :(name)  - menja vase ime,
  NH:        - upisuje BBS na koji ce ici poruke za vas (MYBBS, HomeBBS...)
  NZ:        - upisuje postanski broj vaseg QTH,
  NQ:        - upisuje vas grad ili mesto,
  NL:        - upisuje vas QTH lokator,
  O :(option)- odabir opcija (stranice, jezika.....),
  PS:        - spisak prisutnih servera (nije isto sto i "server mod"),
  PG:        - pokretanje ili popis posebnih DOS programa,
  R :(read)  - cita poruke,
  S :(send)  - salje poruke,
  T :(talk)  - zove SysOp-a,
  TH:(themes)- pristup tematskoj podeli biltena (novo u FBB 7),
  V :(verbose)- cita poruke sa kompletnim putanjama ili verzija BBS-a,
  W :(what)  - spisak fajlova u DOS delu,
  WP:        - White Page server, pomoc detaljnije sa:   ? WP,
  X :(expert)- menja status korisnika: normal ili expert,
  Y :(yapp)  - protokol za prenos binarnih (najcesce programskih) fajlova,
  Z :(delete)- brise fajl,
  > :(text)  - salje kratki tekst nekom drugom korisniku (sada) u BBS-u,
  = :(conn.) - konektuje vas sa nekim drugim korisnikom (sada) u BBS-u,
  ! :(info)  - kratki info o bbs-u,

  Opsirniju pomoc za sve naredbe dobijate ukoliko otkucate: ? <naredba>.

  Na pr: ? c   ? f   ? y    .....

  @@ 14 I|INFO

  I         daje INFO fajl o ovom BBS-u (ukoliko postoji informacija).

  WhitePages server naredbe:

  I CALL    daje podatke o stanici, preuzete iz WP servera,
  ID        broj zapisa u WP bazi podataka,
  I@ BBS    daje listu korisnika nekog BBS-a (I@ YU7A),
  IH ruta   daje poznate korisnike sa zadatom hijerarhijskom rutom (IH YUG),
  IZ ZIP    daje korisnike sa zadatim postanskim brojem (IZ 21000).

  U vecini WP naredbi dozvoljeni su "dzoker" znakovi.

  @@ 14 J|JA|JB|J1|J2|JK

  JK daje spisak poslednjih 20 konektovanih stanica,
  JA daje spisak poslednjih 20 konektovanih stanica na portu A (JB - port B),
  J1 daje spisak poslednjih 20 slusanih stanica na portu A (J2 - port B),
  JK CALL daje spisak nekoliko poslednjih konekta stanice CALL,

  @@ 14 K|KILL|KM|KK

  K  broj1 broj2 .. brise poruke koje ste poslali ili primili. Mozete obrisati
     i ono sto niste procitali od licnih poruka.
  KM naredba brise SVE poruke za vas koje ste procitali. Ovo NECE obrisati one
     koje niste procitali.


  @@ 14 L|LIST|LB|LM|LN|LL|LS|L<|L>|L@|LU|LR|LC|LD>|LD<

  L  lista sve NOVE pristigle poruke/biltene od poslednje primene L naredbe,
  LB lista biltene,
  LD> GGMMDD lista sve poruke pristigle posle datuma GGMMDD,
  LD< GGMMDD lista sve poruke pristigle pre datuma GGMMDD,
  LM lista poruke upucene licno vama,
  LN lista poruke upucene licno vama koje jos niste procitali,
  LL 10 lista poslednjih 10 poruka,
  LS <text>  pretrazuje NASLOVE poruka u potrazi za textom <text>,
  L< CALL lista poruke koje je poslao CALL,
  L> CALL lista poruke za CALL,
  L@ lista lokalne biltene bez @ BBS polja,
  L@ CALL  lista  @CALL poruke,
  L 220- lista samo poruke od 220 pa navise,
  L 220-230 lista poruke izmedju 220 i 230,
  LU lista sve neprocitane poruke koje ste poslali/primili,
  LR lista poruke UNAZAD od najstarije prelistane prema najnovijoj u bbs-u,
  LC posebno listanje po vasem uslovu. Prvo zadate uslov na pr.. LC DX i od tada ce
     sve gornje naredbe za listanje (osim LM i LN) listati SAMO poruke poslate
     za DX. Ako stavite "dzoker" na pr.. LC *DX* onda ce listati sve poruke koje u
     polju "Za" imaju slova DX (VHFDX, DXHF, DXCC...). Za povratak u "obicno"
     listanje ukucajte LC *

     Da dobijete spisak mogucih LC polja ukucajte:   LC ?

  @@ 14 M|MH|MV|MA|MVA|MHA

  M  <por.br.> <ime> : kopira poruku <br.> u fajl <ime>,
  MH <por.br.> <ime> : isto, ali kao kod citanja u formatu R naredbe,
  MV <por.br.> <ime> : isto, ali kao kod citanja u formatu V naredbe,

  Napomena: sve ove naredbe ce PREPISATI preko starog fajla (ako postoji).

  Naredbe: MA, MHA i MVA imaju istu upotrebu, ali nece prepisati stari fajl
  nego ce DODATI novi tekst na kraj starog fajla.

  @@ 14 N|NAME

  Naredbom N mozete upisati ili promeniti svoje ime (do 12 znakova max.).
  Na pr.  N Haralampije

  Pogledajte jos i: NP, NL, NQ, NZ, NH naredbe.

  @@ 14 NH|HOMEBBS|MYBBS

  Ovom naredbom upisite svoj maticni ("home") BBS na koji vam dolaze poruke.
  Na pr. NH YU7A
  Sve licne poruke za vas, koje kasnije stignu, bice upucene na BBS koji ste
  naredbom NH odredili.

  @@ 14 NP

  Za promenu lozinke kod porta za telefonski modem.

  @@ 14 NQ

  Naredbom NQ upisite svoj QTH (grad ili mesto).

  @@ 14 NL

  Naredbom NL mozete upisati svoj QTH lokator, sto je vazno za razne proracune
  u server modu.

  @@ 14 NZ

  Naredbom NZ upisite svoj postanski broj. Na pr. NZ 21000

  @@ 14 O|OP|OR|OL|ON|OM

  Naredba O ispisuje vase licne parametre u ovom BBS i to:

  - jezik koji koristite,
  - da li je ispis po stranicama i sa koliko linija (pre pitanja: Dalje?),
  - bazni broj za poruke,
  - zelite li da vidite i tudje licne poruke ili ne (ako sistem dozvoljava),
  - zelite li spisak novih poruka za vas odmah po ulasku u BBS.

  OL sluzi za izbor jezika na kojem ce BBS komunicirati sa vama.
  Otkucajte OL za spisak mogucih jezika, a onda ponovite sa odabranim jezikom.

  Na pr. OL 4 za promenu u jezik broj 4 sa spiska mogucih jezika.

  OP sluzi sa formatiranje stranica listanja/citanja.
  Podesava nakon koliko linija ce BBS prekinuti ispis i cekati vasu odluku
  da: prekinete, idete dalje i slicno. Upisite na pr.. OP 20 za 20 linija pre
  pitanja za dalji rad.

  Ukoliko ukucate samo OP bez broja, dobijate stalni ispis bez prekidanja.

  ON podesava tzv. osnovni (pocetni) broj kod citanja poruka.
  Kako ovaj tip BBS-a poruke i biltene razlikuje samo po njihovom broju, koji
  stalno raste sa dolaskom novih poruka, ubrzo postane malo nezgodno kucati
  na pr.. R 20050 20056 itd. Zato naredbom ON 20000 podesite "bazu" na 20000 i
  dalje radite kao da nema tih 20000 tj... od tada kucate: R 50 56 itd. Inace,
  naredbe: ON 20 i ON 20000 su ista stvar.

  Naredbom OR mozete odabrati da li zelite da citate/listate licne poruke
  ostalih korisnika bbs-a. Ako je ukljuceno, moze biti nezgodno ako vam stigne
  ispis, recimo 200 komadica nekog fajla koji vas ne zanima.

  Naredbom OM, prilikom svakog konekta u bbs, prvo dobijate spisak NOVIH
  poruka za vas a zatim uobicajeni bbs prompt.

  @@ 14 PG

  Naredba PG startuje usluzne programe iz posebnog direktorijuma. PG <enter>
  daje samo spisak tih malih programa. Pokretanje nekog od programa sa spiska:
  PG <ime_programa_bez_ekstenzije> <parametar_programa_ako_treba> <ENTER>

  @@ 14 PS

  Naredba PS daje spisak ugradjenih "servera" u ovom BBS-u. Ti serveri nisu
  isto sto i tzv. server-mod samog BBS-a. To su posebni programi koji po nalogu
  korisnika odrade razne stvari automatski. Sa serverom se komunicira kao i sa
  nekim amaterom - slanjem "licne" poruka tom serveru.

  Na pr. REQDIR server ce vam spremiti sadrzaj direktorija koji zelite i u vidu
  licne poruke za vas uputiti na vas maticni BBS.

  Primer:

  Naredba: SP REQDIR <enter>
  Naslov:  \yapp\*.* @ YU1A <enter>
  Tekst:   Ostavite prazno, na kraju: CTRL-Z <enter>

  ce vam poslati licnu poruku na bbs YU1A, u kojoj je sadrzaj YAPP
  direktorijuma ovog BBS.

  @@ 14 R|RM|RN|RU|R>|R<

  R <broj>  cita poruku <broj>,
  R <broj1> <broj2> itd   cita poruke po navedenim brojevima,
  RM cita SVE poruke za vas - i one vec procitane (ne zaboravite na brisanje),
  RN cita sve NOVE poruke za vas (samo NEprocitane),
  RU cita sve poruke za vas koje jos niste procitali,
  R< <poz_znak>  cita sve poruke koje su poslate od strane stanice <poz_znak>,
  R> <tekst>  cita sve poruke za pozivni znak ili temu <tekst>.

  @@ 14 S|SB|SR|SC|SP

  Naredba S se koristi za slanje licnih poruka i biltena:

  S SVIMA          za otvorenu poruku samo na ovom BBS (ne ide dalje),
  SB PRODAM @YU    za otvoreni bilten na sve BBS u Jugoslaviji sa temom prodaje,
  SP YT7MPB@YU7A   za licnu poruku YT7MPB koja treba da ode/ostane u bbs-u YU7A,
  SR <broj>        salje odgovor na poruku <broj>. BBS ce sam da doda sve ostalo
                   u vezi adrese primaoca, kao i "Re:" u naslovu.
  SC <broj> <CALL> kopira poruku <broj> za <CALL>. Na pr. dvojici primalaca ide
                   isti tekst. Pre CTRL-Z mozete dopisati neki komentar, a
                   kopija poruke <broj> se sama dopise posle tog komentara.

  To je moguce u svim varijacijama (@EU, @YUG, @WW, @YU7 itd.).

  @@ 14 T

  Naredba T trazi od BBS-a da pozove SysOp-a na razgovor. Nema nikakvog
  argumenta, samo T <enter>. Ukoliko SysOp nije prisutan ili se ne javi
  na poziv u roku od 1 minuta, dobijate informaciju da mu ostavite poruku.

  @@ 14 TH

  Izlistava poruke slozene po temama, ranije podesenim u BBS-u.

  Na pr. sve poruke, poslate za OS2, DOS, NT4 i sl. mogu da budu u temi OPSISTEMI.

  Moguce naredbe su:

  H (list themes) - popis tema u bbs-u,
  L (list)        - listanje poruka o izabranoj temi,
  R msg# (read)   - procitaj poruku broj <msg#> u izabranoj temi,
  broj            - idi na teme <broj>.


  @@ 14 U

  Naredbom U mozete da posaljete neki tekst fajl u BBS. Sintaksa je kao
  i kod MS-DOS. Pogledajte i pomoc za D i W naredbe (? D ? W).

  @@ 14 V

  Naredba V daje kratku informaciju o porukama, verziji BBS programa itd.

  Takodje moze da radi i kao naredba R za citanje poruka. Tada prikazuje
  zaglavlja sa putanjama i usputnim bbs-ovima, pa pravi daleko veci ispis.

  @@ 14 W

  Naredba W je nesto kao DIR ili CAT naredba. Dobijate spisak svih fajlova
  i direktorijuma koji su na raspolaganju korisnicima. Vaze sva MS DOS
  pravila. Primeri:

  W
  W *.DOC
  W \IBM\*.*

  @@ 14 WP

  WP je interni server BBS-a. To je velika baza podataka o korisnicima stvorena
  bilo direktnim upisom podataka od strane samih korisnika, bilo analizom svih
  zaglavlja koja prate svaki bilten/poruku. WP sadrzi podatke o pozivnom znaku,
  imenu korisnika, postanskom broju i "home"-BBS-u sa H-adresom.

  Ukoliko je WP aktivan, mozete bilo kome poslati licnu poruku iako ne znate
  koji je njegov "home"-BBS. Ukoliko server ima tu informaciju, sam ce je
  dodati, ako je (ponekad) nema - trazice od vas da adresu sami unesete.

  Sa bilo kojeg BBS-a, mozete WP serveru poslati pitanje o nekom korisniku:

  Naredba: SP WP @BBS  (@BBS zamenite sa znakom BBS-a sa kojeg zelite odgovor),
  Naslov:  unesite neki tekst (nebitno, napr. Info)
  Tekst:   YU1A ?      (napr. trazite info o YU1A)
  /EX ili CTRL-Z

  Takodje je dozvoljeno koristiti i dzokere pa mozete traziti info za
  na pr. sve stanice sa prefiksom YT:

  YT* ?

  Napomena: da bi se smanjio QRM, odgovor ce imati maksimalno 100 redova, bez
  obzira koliko ima pravih informacija.

  U vezi sa ovim, pogledajte i pomoc za I naredbe (? I).


  @@ 14 X

  Naredba X prebacuje vas korisnicki status iz "normal" u "expert" i obrnuto.

  Status "normal" daje kompletniji i opsirniji odgovor od BBS-a,
  Status "expert" daje kratki i sazetiji odgovor od BBS-a.


  @@ 14 Y|YAPP|YW|YI|YN|YU|YD|YZ

  Sve naredbe koje pocinju slovom Y rade binarni transfer fajlova pomocu tzv.
  YAPP protokola.

  YW       lista direktorijum programa,
  YN       lista "novitete" od poslednje upotrebe naredbe YN,
  YU fajl  ubacuje - snima fajl u BBS,
  YD fajl  salje vam - "skida" file iz BBS-a,
  YI       kao i YW, samo dobijate i kratki opis programa,
  YI fajl  daje kratku informaciju o fajlu (ako je upisana kod unosa fajla),
  YZ fajl  brise fajl.

  YAPP mogu koristiti samo vlasnici racunara sa programom koji sadrze i
  taj protokol. Na pr za PC :YAPP, THS, TPK, modifikovani SP, s tim da bi trebalo
  upotrebiti prg koji podrzava tzv. RESUME mod. To znaci da kad se veza prekine,
  dodjete opet i nastavite tamo gde ste stali. Takvi su prg: TPK, ZACC, PTM,
  AUTOYAPP itd.

  YAPP se takodje moze upotrebiti iz FbbDOS-a, ali su onda druge naredbe.

  @@ 14 Z

  Naredba Z brise fajl iz BBS mod-a.

  @@ 14 >

  Znak > omogucuje da nekom drugom ko je takodje prisutan u BBS-u, posaljete
  kratku poruku (jedan red). Nesto kao "Break" u fonijskoj vezi. Primer:
  > YT7MPB Hi OC ! Pozovi me kad zavrsis !

  Napomena: pre naredbe > pogledajte koga jos ima u BBS-u naredbom !

  @@ 14 =

  Znak = daje mogucnost da stupite (kroz BBS) u direktnu vezu s nekim ko je
  takodje u BBS-u. Ako nije zauzet necim dobijate odgovor *** Connected to ...
  a obe strane mogu prekinuti takvu vezu sa CTRL-Z i vratiti se u BBS-mod.

  Primer:
  = YT7MPB

  Pre toga naredbom ! pogledajte da li je YT7MPB trenutno u bbs-u.

  @@ 14 !

  Naredba ! daje spisak stanica u BBS i jos poneke informacije o sistemu.

  #################
  # GATEWAY is 16 #
  #################


  @@ 16 H|B|K|C|D|J|M|P

  Gateway naredbe:

  B : bye -diskonekt za drugog, a vas vraca nazad u BBS,
  K : converse mod,
  C : konekt,
  D : diskonekt,
  H : pomoc,
  J : spisak poslednjih 20 slusanih stanica,
  P : direktni skok s porta na port. P1 - idi na port1 (port je sam TNC),
  M : monitor on/off,
  W : W <fajl> otvara "capture" file, samo W <enter> ga zatvara.

  Prvo odaberete port. Ukoliko nije zauzet, bice vam dodeljen i preuzece vas
  znak. Kad nekog konektujete, ulazite u "converse" mod (kao i primenom K
  naredbe). Povratak u "command" mod je ESC ili:  >  <enter>.

  @@ 18 C

  C  naredba: ulazite u konferenciju,
  CW naredba: ispisuje stanice koje su u konferenciji.

  Napomena: sve naredbe u konferenciji pocinju tackom u prvoj koloni!

  .C<port> <call>   konektuje stanicu <call> na portu <port>,
  .H                daje vam ovaj tekst,
  .W                ispisuje spisak stanica u konferenciji,
  .Q                izlazite iz konferencije.
  =====EOF=====



  11.2.  SRPSKI.TXT

  =====BOF=====



  ##############################
  # SRPSKI.TXT for FBB 7.00i   #
  #    (Serbian text file)     #
  # by Misko,YT7MPB   07Jul03  #
  ##############################
  #
  # 255 karaktera max.po liniji.
  # ----------------------------
  #
  # Ne menjajte broj i raspored linija!
  #
  # Ime jezika - What language is this ?
  #
  Srpski
  OL: Izabrali ste Srpski jezik.$W
  #
  # Definicija odgovora Da i Ne
  #
  Da
  Ne
  #
  # Dani i meseci
  #
  NedPonUtoSreCetPetSub
  JanFebMarAprMajJunJulAvgSepOktNovDec
  #
  # Strane sveta (za QTH-lokator server)
  #
  Sever
  Jug
  Istok
  Zapad
  #
  #
  #T_MES: Dobrodoslica
  #
  # za BBS:
  #
  $O Mailbox, QTH $?.$W
  #
  # za expert:
  #
  $O BBS, $c.$WZdravo $I! (prethodni QSO je bio: $x $Y)$WNove poruke su: $Z - $L, aktivnih ima $N.$W
  #
  # normal user
  #
  $O BBS, QTH $c $?.$WZdravo $I, nalazite se na kanalu $=.$WQSO $d $H (prethodni QSO je bio: $x $Y)$WU BBS-u ima $N aktivnih poruka,$W$Z je poslednja koju ste listali, $L je poslednja stigla u BBS.$WFilter za listanje poruka (LC) je: $l (* = sve).$W
  #
  # Upis podataka
  #
  Upisite sa N svoje ime (na pr.. N Petar)        : $W
  Upisite sa NQ svoj grad (na pr.. NQ Novi Sad)   : $W
  Upisite sa NH najblizi BBS (na pr.. NH YU7A)    : $W
  Upisite sa NZ postanski broj (na pr.. NZ 21000) : $W
  #
  #
  # za goste:
  #
  Zdravo $I, na raspolaganju vam je ogranicen izbor naredbi.$W
  #
  # tekst za onog ko uleti na 'BBS only' port:
  #
  Ovaj kanal je samo za BBS stanice!  //q $W
  #
  #  prvi put u BBS-u:
  #
  Pozdrav za prvi konekt ovom BBS-u!$WOdgovorite na pitanja, snimite HELP i prijatna vam zabava!$W
  #
  # poruke za vas:
  #
  Niste procitali nove poruke za vas: $0 kom.$W
  #
  # procitane, neobrisane poruke:
  #
  Naredbom KM obrisite $0 kom. licnih poruka koje ste procitali.$W
  #
  # bye-bye:
  #
  U BBS-u ste boravili: $: - CPU vreme: $.$W73! $I, dodjite opet...$W
  #
  # odgovor na "!"
  #
  BBS i server F6FBB tipa, ver. $E - $* aktivnih kanala.$W$%$W$N aktivnih poruka - poslednja poruka $L.$WOvaj konekt traje: $: PC vreme: $.$W
  #
  # neka standardna pitanja i poruke
  #
  #T_QST
  ENTER = nastavak, A = prekid, C = bez prekidanja, N = sledeca poruka -->
  Promeniti  (D/N) ?
  Hvala  $I.$W
  $WPrekid !!$W$W
  Napraviti  (D/N) ?$W
  $WVas izbor (L za listu, F za kraj) :
  ENTER = nastavak, A = prekid, R broj = procitaj broj ->
  #
  # poruke o greskama...
  #
  #T_ERR
  *** Greska  $I: Netacan odgovor.$W
  *** Greska  $I: Pogresna naredba $0.$W
  *** Greska  $I: Zaboravili ste razmak posle naredbe !$W
  *** Greska  $I: Samo su brojevi dozvoljeni !$W
  *** Greska  $I: Nedostaje tekst posle poz.znaka.$W
  *** Zalim   $I, nema pomoci za $0.$W
  *** Greska  $I: Nedostaje znak primaoca.$W
  *** Greska  $I: Nedostaje znak.$W
  *** Greska  $I: Nepoznat fajl.$W
  *** Greska  $I: Znak $0 nije dozvoljen ovde.$W
  *** Greska  $I: Ne postoji poruka broj %M.$W
  *** Greska  $I: Ime fajla $f ne postoji.$W
  *** Greska  $I: Ne mozete obrisati poruku %M (ili je vec obrisana)$W
  *** Greska  $I: Broj %M ne postoji.$W
  *** Greska  $I: Pogresan port.$W
  *** Greska  $I: Upotrebite CD naredbu.$W
  *** Greska  $I: Polje $0 je predugo.$W
  *** Greska  $I: Adresa za $0 je pogresna.$W
  *** Zao mi je $I, danas ste vec snimili %dkb. $W
  *** Greska  $I: Nema nista !$W
  *** Greska  $I: Nedostaje ime fajla.$W
  *** Greska  $I: Kako se zove odredisni fajl?$W
  *** Greska  $I: Ne govorim taj jezik, a sumnjam da postoji takav!$W
  *** Greska  $I: Ne diraj ono sto nisi poslao! (na $f mislim)$W
  *** Greska  $I: Nepoznat direktorijum $0 (ili nije prazan).$W
  *** Greska  $I: Nema takvog direktorijuma$W
  *** Greska  $I: Nemoguce je napraviti direktorijum $0.$W
  *** Greska  $I: A gde vam je "path" ?$W
  *** Greska  $I: "Path" predug.$W
  *** Greska  $I: Taj "path" ne postoji !$W
  *** Greska  $I: Nemoguce kreirati fajl $f.$W
  *** Vreme isteklo !!!$W
  #
  # Tekstovi za pojedine celine
  #
  # BBS prompt:
  #
  #T_MBL
  #
  # expert prompt:
  #
  ($*) $O BBS >$W
  #
  # gost prompt:
  #
  ($*) $O BBS (B,H,KM,LM,O,RM,SP SYSOP,T,?) >$W
  #
  # normal prompt:
  #
  ($*) $O BBS (B,C,D,F,G,H,I,J,K,L,M,N,O,PS,PG,R,S,T,U,V,W,X,Y,Z,?) >$W
  #
  # ostale poruke:
  #
  Nema takve poruke (filter za listanje je (LC): $l).$W
  Nema novih poruka za vas.$W
  Naslov poruke za %G (max. 30 slova):$W
  Tekst poruke, zavrsite sa Ctrl-Z ili /EX u novom redu : $W
  Poruka %M je obrisana.$W
  #
  # odgovor na V naredbu:
  #
  Program F6FBB v.$E, $N aktivnih poruka, poslednja poruka je $L.$W
  #
  # ostale poruke
  #
  Upisite svoje ime :$W
  Ime je upisano  kao $I... Hvala. $W
  #
  # Novo u 5.15c5: Slovo I
  # Novo u 7.0b20: Slovo F
  Call      Zadnji conn #ukup RPBSXLFEMUI Ime          Password     PRIV-dir.$W
  $V nije prisutan, mozete da mu ostavite poruku (SP SYSOP).$W
  Pricekajte malo dok pozovem SysOp-a .....$W
  $V nije u blizini. Pozovite ga ponovo (T) ili mu ostavite poruku (SP SYSOP).$W
  $V je na vezi:$W
  Molim vas pricekajte, SysOp bi da razgovara s vama.$W
  Ekspertni mod. Otkucajte: X <enter> za povratak u Normal mod.$W
  Normalni mod. Otkucajte: X <enter> za povratak u Ekspert mod.$W
  Server mod. Otkucajte: F <enter> za povratak u BBS mod.$W
  Datoteka $f je kopirana.$W
  Poruka za $G je ponistena (nije bilo naslova).$W
  OP: kontinuirani ispis.$W
  OP: $p linija po stranici (pre pitanja za nastavak).$W
  Korisnik je konektovan, editovanje nije moguce.$W
  $0 $1 $2 $3 $j $K = $4'$5
  #
  #
  ON: osnovni broj za poruke : $0 (dodaje se broju koji unesete).$W
  #
  #
  (B)id, (F)rom, (V)ia=@BBS, (T)o, T(I)ttle, (S)tatus, T(Y)pe, (Cr)End >$W
  R,P,B,S,X,L,E,M,U $W(N)ame,pass(W)ord,lan(G)uage,pri(V)-dir,(H)omeBBS (Z)ip-code >$W
  Znak $0 je nepoznat. Da ga kreiram (D/N) ?
  Obrisati $0 (D/N) ?
  Moguci jezici su:$W
  ($0):$1
  $W--- Kraj poruke $M  za  $G od $P  ---$W$W
  Poruka $0$WW
  #
  # zaglavlje kod citanja poruka:
  #
  Poruka od   : $P$WZa          : $G$0$WTip/Status  : $t$s$WDatum/vreme : %j %K$WBid/Mid     : $R$WDuzina      : $n$W
  #
  # zaglavlje kod listanja poruka:
  #
  Vas filter za listanje (LC) je: $l$W$WPor#   TSLD  Duz  Za    @ BBS   Od       Datum      Tema   $W
  #
  # sadrzaj svake  linije kod listanja poruka:
  #
  $M $t$s$r%r $n $G$0 $P %i $1$W
  Naslov      : $S$W$W(Do sada vec procitana %C puta u ovom BBS-u)$W$W
  Bid (Mid) : $R$W
  Poslata prema:
  $0 ruta prema $v$W
  #
  # prompt za fwd
  #
  F>$W
  >$W
  #
  # poruke tokom fwd
  #
  NO - pogresan parametar$W
  NO - BID$W
  OK $W
  *** Done$W
  Poruka #%M  Duz : $n$W
  Nemam forward prema $A, SysOp ce to da sredi.$W
  Upisite odgovor za $G @ $v$W
  ###############################################################################
  # New texts for 5.14
  OR: Pristup svim licnim porukama$W
  OM: Ispis novih licnih poruka za vas po ulasku u BBS : $0$W
  Upisite pozivni znak BBS-a na koji zelite da vam se salju poruke:$W
  Upisite svoj postanski broj :$W
  HomeBBS : $0$W     Post.br : $1$W
  # umesto ovog dole mozda ubaciti "Upozorenje ! Nema WP-rute prema $G$W
  Nema WP-rute prema %G. Pritisnite ENTER za prekid i ponovo adresirajte.$W
  ###############################################################################
  Trenutno ima $0 zadrzanih poruka$W
  (A)rchive,(K)ill,(L)ocall,(Q)uit,(R)ead,(V)erbose,(U)nhold ?
  #
  # Traitement
  #
  # T_TRT
  ############################################################################
  # Line added from 515c45
  Poruka je prihvacena i zadrzana na uvid SysOp-u pre razmene.$W
  ###############################################################################
  *** Zauzet(o), molim pricekajte...$W
  *** Zauzet(o), nema konekta trenutno....$W
  *** $0 nije konektovan..$W
  $W$B*** Connected to $0 kroz BBS (prekid sa Ctrl-Z).$W
  *** Disconnected$W
  *** Trenutna poruka  ("break") od $0 *** (odgovor sa:  > $0 tekst...)$W
  *** Kraj poruke ("break") ***$W
  Mali prekid za poruku od $0.$W
  Zahtev "Stop" je zatrazen od $0. Code : $1$W
  Zahtev "Stop" je prihvacen, nema konekta.$W
  Zahtev "Reset" je prihvacen, inicijalizujem.....$W
  ENTER=nastavi  A=prekid -->$W
  Zahtev za prekid je odbijen.$W
  BBS mod. Otkucajte: F <enter> za povratak u server mod.$W
  #
  # server meni
  #
  # T_MEN
  #
  $WSERVER (B,C,D,F,N,Q,T,?=pomoc) >$W
  $W
  $W(C) Connect-statistika$W(D) Dokumenti, informacije$W(N) Callbook$W(Q) QTH-LOC$W(T) Sateliti$W(F) Povratak u BBS$W(B) Disconn.$W$W Za pomoc otkucaj ? slovo$WSERVER-MENI (C,D,N,Q,T,F,B  ?=pomoc) >$W
  #
  # statistika
  #
  # T_STA
  $WSTATISTIKA (G,H,I,J,L,O,F,B ?=pomoc) >$W
  $W
  $W(G) Ukupno$W(H) Zauzece po satima$W(I) Poz. znaci$W(J) Zauzece po danima$W(L) Detaljna conn. lista$W(O) Zauzece u % $W(F) Povratak u SERVER-MENI$W(B) Disconn.$W$W Za pomoc otkucaj ? slovo$W$WCONN-STAT (G,H,I,J,L,O,F,B  ?=pomoc) >$W
  Zauzece po danima$W
    PON  UTO  SRE  CET  PET  SUB  NED$W
  Zauzece po satima$W
  0 0 0 0 0 1 1 1 1 1 2 2  Sati$W
  0 2 4 6 8 0 2 4 6 8 0 2$W
  $N Aktivnih poruka$W
  Konekta od $j: $0$W
  Konekti$W  Prosecno trajanje   : $0min $1s$W
    Pros. conn. dnevno   : $0$W
    Najveca guzva        : u $0 i $1 sati$W
  Zauzece u % $W
    BBS                  : $0 % $W
    SERVER               : $0 % $W
  SERVER detaljnije:$W
    DOS                  : $0 % $W
    QTH lokatori         : $0 % $W
    Dokumentacije        : $0 % $W
    Conn. statistika     : $0 % $W
    Callbook             : $0 % $W
    Sateliti             : $0 % $W
  $0 $1 $2 $3 $j $K = $4'$5"$W
  #
  # callbook deo
  #
  #T_NOM
  #
  $WCALLBOOK (I,N,R,F,B  ?=pomoc) >
  $W
  $W(I) Spisak svih znakova$W(N) Promena ili upis tvojih podataka$W(R) Citanje podataka drugih$W(F) Povratak u SERVER-MENI$W(B) Disconn.$W$WZa pomoc ukucaj ? slovo$W$WCALLBOOK (I,N,R,F,B  ?=pomoc) >$W
  $WPoz.znak: $0$W
  $WPrethodni conn. $j u $K$W
  Ime i prezime: $1 $0$WAdresa       : $2,$3$WQTH LOC      : $4. $WTlf,kucni    : $5 $WTlf,posao    : $6$WHome-BBS     : $7$W
  Prezime          :$W
  Ulica i broj     :$W
  Grad/mesto       :$W
  Telefon u stanu  :$W
  Telefon na poslu :$W
  QTH LOC          :$W
  $WUkupno: $0 poz.znakova$W
  *** Znak $0 nepoznat.$W
  *** Neispravan QTH LOC !$W
  #
  # sateliti
  #
  #T_TRJ
  #
  $WSATELITI (C,P,T,F,B  ?=pomoc) >
  $W(M) Promene parametara$W
  $W(C) Karakteristike$W(P) Orbitalni parametri$W(T) Orbite$W(F) Povratak u SERVER-MENI$W(B) Disconn.$W$WZa pomoc ukucaj ? slovo$W$WSATELITI (C,P,T,F,B  ?=pomoc) >
  $WLokator : $0    Satelit $1$W
  --------------------------------------------------------------$W
  | Time  | Az. | El. | Dpl. | Dist. | Alti. | Lon | Lat | Ph. |$W
  |  UTC  | Deg | Deg | KHz  |  Km   |  Km   | Deg | Deg | 256 |$W
  --------------- $j-$a ------ Orbite #$0 ---------------$W
  | $0:$1 | $2 | $3 | $4 | $5 | $6 | $7 | $8 | $9 |$W
  Unesite datum za proracun (dd/mm/gg) :
  Unesite vreme za proracun  (HH:MM)   :
  $WMolim pricekajte...$W
  $WNemam informacija za taj satelit.$W
  Izmene od $j-$y.$W
  Ime satelita        :
  Referentna orbita   :
  Referentna godina   :
  Referentni dan      :
  Mean anomaly        :
  Arg. of perigee     :
  R.A.A.N.            :
  Inclination         :
  Eccentricity        :
  Mean motion         :
  Derived mean motion :
  Estimated step      :
  Doppler frequency   :
  $WOrbitalni parametri za $0$W
  Broj orbite         : $0$W
  Epoch year          : $0$W
  Epoch day           : $0$W
  Mean anomaly        : $0$W
  Arg. of perigee     : $0$W
  R.A.A.N.            : $0$W
  Inclination         : $0$W
  Eccentricity        : $0$W
  Mean motion         : $0$W
  Derived mean motion : $0$W
  Estimated step      : $0$W$W
  ($0) $1
  (F) Kraj$W
  #
  # qth lokatori
  #
  #T_QRA
  #
  $WQTH-LOKATOR (C,D,L,Q,F,B  ?=pomoc) >
  $W
  $W(Q) QTH -> duz.i sir.$W(L) duz.i sir. -> QTH$W(D) QRB i azimut$W(C) QRB sabirnica$W(F) Povratak u SERVER-MENI$W(B) Disconn.$W$WZa pomoc ukucaj ? slovo$W$WQTH-LOC (C,D,L,Q,F,B,  ?=pomoc) >
  $WQTH Lokator :
  Koordinate u centru polja :$W
  Duzina : $0 step. $1' $2 : $3 grad. $2$W
  Sirina : $0 step. $1' $2 : $3 grad. $2$W
  $WRadni format$WU stepenima    : 1 : 45 : 00 (smer).U gradijanima   : 1.5 (smer)$W(smer) zamenite sa Sever, Jug, Istok, Zapad.$W
  $WDuzina (Istok/Zapad)  (F,Q=kraj) :
  $WSirina   (Sever/Jug)  (F,Q=kraj) :
  $WQTH Lokator   (F,Q=kraj) : $0$W
  $WOd QTH LOC    (F,Q=kraj) :
  $WDo QTH LOC    (F,Q=kraj) :
  Azimut    : $0 step. $1'$W
  Udaljenost: $0 Km$W
  $WVas QTH Lokator (F,Q=kraj) :
  $WDo QTH LOC ?    (F,Q=kraj) :
  Proracun br. $0 - Ukupna udaljenost: $1 Km$W
  Kraj proracuna.$W
  #
  # Modul DOS
  #
  #T_DOS
  #
  $W$u:$0>$W
  Direktorijum $0 obrisan.$W
  Fajl ne postoji.$W
  $0 $1 $2 $3   $4 $5 $6 $7$W
  Prekinut upis $f.$W
  Fajl $f je snimljen ($0 bytes).$W
  Unesite fajl $f (kraj = Ctrl Z).$W
  $0 bytes kopirano.$W
  $W$j $T  FBBDOS V$E$W$WPomoc u FBBDOS-u dobijate sa: H <enter>.$W$WDownload u toku danasnjeg dana = %dkb$WDozvoljeno je max = %mkb$W
  $WMoguce naredbe su:$W
  Fajl $f obrisan.$W
  $0 bytes slobodno.$W
  #
  # Modul dokumentacija
  #
  #T_INF
  #
  $WDOC (#,R,B,F  H=pomoc) : >
  $W(D) Label
  $W(L) Lista$W(broj) Cita doc. broj$W(R) Nazad na prethodni nivo$W(B)  Disconn.$W(F) Povratak u SERVER-MENI$W$WZa pomoc ukucaj ? slovo$W$WDOC (#,L,R,B,F H=pomoc) >
  Ne postoji !!
  #
  #  gateway
  #
  #T_GATE
  #
  Sada ste na kanalu $=, port $!. $g dostupnih portova.$WH = pomoc. Q = Bye.$W
  Broj porta (Q = Bye) :
  Kanal $0 dodeljen na $1.$W
  Nema slobodnih kanala na tom portu.$W
  Cmd :
  Konvers mod. Esc ili > (return) za command mod.$W
  *** Greska $I: Vec ste na tom portu!$W
  *** Greska $I: Pogresan port.$W
  *** Gateway nije dostupan.$W
  #
  $O: Pogresna naredba $0. (B,C,D,J,K,H,M,P,?)$W
  Saljem $f...$W
  Otvoren $f log fajl.$W
  Zatvoren $f log fajl.$W
  #
  # Modul YAPP
  #
  #T_YAP
  #
  Spreman za slanje $f $0 protokolom.$W
  Spreman za prijem $f $0 protokolom.$W
  Zalim, $0 nije moguc na ovom portu.$W
  Kratak opis fajla (40 znakova max) :
  $0 $1 $2 $3   $4$W
  #
  #  KONFERENCIJA
  #
  #T_CNF
  #
  Nalazite se u konferenciji (Pomoc= ".?").$W
  $H. Stanice u konferenciji :$W
  Call: $0, kanal $1.$W
  $H $0 ulazi u konferenciju.$W
  Izlazite iz konferencije.$W
  $H $0 napusta konferenciju.$W
  [$H - $0]$W
  Nema nikog drugog u konferenciji.$W
  $H $0 : Retry count exceeded.$W
  $H $0 busy.$W
  $H $0 nije u konferenciji!$W
  #
  ###########################################################
  # New in 5.15c5:
  # T_THE : Module THEMES.
  #
  Poruka   Duz  Za     Od     Naslov     (Tema :%T)$W
  $M%r $n $G $P $1$W
  %T - %t biltena (B,F,H,L,R,broj) :
  #############################################################



  =====EOF=====


  In order to add Serbian to your FBB, you have to add/change a couple
  of lines within your LANGUE.SYS like in the following example:


  =====BOF=====



  #
  # File that decides what language each user will use in the first
  # connect.  He can change language himself later...
  # All prefixes not listed here, will receive language no 1 (English).
  # 3 parametres :
  # Number of languages - Number in PC at the time - Console-language.
  13 2 1
  #
  ENGLISH
  FRANCAIS
  ESPAGNOL
  ITALIANO
  NEDERLAN
  DEUTSCH
  CATALA
  NORSK
  PORTUGUE
  DANSK
  SVENSKA
  HRVATSKI
  SRPSKI
  #
  # 1 : English
  # 2 : French
  # 3 : Spanish
  # 4 : Italian
  # 5 : Dutch
  # 6 : German
  # 7 : Catalan
  # 8 : Norwegian
  # 9 : Portuguese
  # 10: Danish
  # 11: Swedish
  # 12: Croatian
  # 13: Serbian
  #
  9A*     12
  C3*     7
  CT*     9
  CU*     9
  DU*     1
  D*      6
  EK*     1
  E?3*    7
  E?5*    7
  E?6*    7
  E*      3
  F*      2
  H*      2
  I*      4
  LA*     8
  ON1A*   5
  ON1B*   5
  ON1C*   5
  ON1K*   2
  ON4*    2
  ON5*    2
  ON6*    2
  ON7*    2
  ON8*    1
  ON9*    1
  OZ*     10
  PY*     9
  P*      5
  SK*     11
  SM*     11
  TU*     2
  TK*     2
  VE2*    2
  YU*     13
  YT*     13
  YZ*     13
  4N*     13
  4O*     13
  #
  3A*     2
  3B*     2
  #



  =====EOF=====



  12.  How to make better ham radio rules?

  2003-10-26


  Notice: Gentle folks, here I am going to discuss some
  rules'n'regulations issues that we, radio amateurs, face to every day.
  These problems make rather significant obstacles for this nice
  alternative way of communication to be more developed and more widely
  used.


  First of all, anybody who might be interested in running Linux amateur
  radio software, as a way of using radio amateur stations on the
  international HF waves, in a digital manner, has to learn manual
  analog Morse telegraphy and pass the similar manual Morse skill test.
  For a long time now, I have been trying to explain myself, why manual
  Morse telegraphy is still being kept as the legal requirement without
  an amateur is not allowed to use HF radio frequencies under 30 MHz, in
  order to contact Linux and other remaining digital radio amateurs
  world-wide. I still have no answer to that question, except that all
  of those who have wasted lots of time learning Morse, now don't want
  to allow newcomers to use the same capabilities - but without the same
  (useless) test!


  You all know, there are so many Linux enthusiasts world-wide
  (including myself) who have been fighting against all types of
  monopols (like a company from Redmond, USA).  The Morse obligatory
  test is the same: just another type of a monopoly!


  That's why I have been trying to persuade all relevant authorities to
  remove such outdated regulatory principles, that make more and more
  obstacles for not only Linux users, but for other kinds of computer
  users - when it comes to the modern ICT technologies. I hope, all of
  you, readers of this mini-HOWTO, can understand now what does it mean
  to use outdated rules and regulations endlessly . For example, I often
  contact various people from the academic world, either students or
  scientists, in order to motivate them to join amateur radio wireless
  activities. They mostly refuse to think about the amateur (also called
  "ham") radio, as soon as they hear they have to pass the Morse test,
  as the legal requirement before they become allowed to connect to
  remote computing radio users world-wide, using the HF radio bands and
  devices.
  What I am sure, the absence of those high educated people within the
  digital ham radio is one of the most negative consequences in the ICT
  areas today!


  I have been thinking what to do since the early ninetees, when I was
  the secretary of YU7 (Vojvodina province in Serbia) amateur radio
  union. It seemed to me that it was a very hard task to persuade the
  people who govern the amateur radio organizations, to remove such
  outdated rule.  When I realized that removing the mandatory manual
  Morse test seemed to be almost impossible to be expected in a short
  period of time, I decided to suggest the implementation of another
  regulatory principle. It should be a major innovation: To make a new
  type of the amateur radio license, a Ham Digital Licence (the HDL in
  short). The HDL licensees would be allowed to use all amateur radio
  frequencies, including all international HF bands under 30 MHz. But,
  they rather should be allowed to use only digital sub-bands and types
  of the amateur radio emissions a.k.a. "modes", including the usage of
  computers, equipped with the LinFBB packet radio software. Besides
  that, the HDL holders may only use modified and/or dedicated radio
  transmitters, without the capability for both voice microphone and
  Morse key connections, in order to avoid possible misuse of unwanted
  amateur activities (like voice SSB operations).


  All HDL candidates should have to learn topics like computer hardware
  and software in general (operating systems and system software
  configuration, amateur radio software setup etc), connecting the
  amateur radio stations to the computers (connecting radio modems to
  the transmitters etc), building simple antennas (like 1/2 wave wire
  dipole for 20m that I used long ago), the English language (or German
  etc) in the written exam etc. The Morse requirement would not be used
  anymore, as well as some other obsolete tests, like highly complicated
  radio circuits or skills needed for building home-brew radios from the
  scratch (instead of buying modern factory manufactured devices). Of
  course, the regulatory issues should also be tested (like band plans -
  in particular recognizing the sub-bands dedicated for digital ham
  radio). Next are RFI issues and how to avoid them etc.


  I believe that amateur radio digital activities have their future only
  if we all do our best to improve the regulatory principles that govern
  this fine hobby. You should also know that, besides the telegraphy
  skill requirement for an HF access, here in Serbia we have some
  further restrictions: we all have to be the members of the national
  amateur radio unions (SRV union in YU7 province and SRS union in
  Serbia in whole), as the legal requirement, before we become allowed
  to use any type of the amateur radio activities.  Such a nonsense does
  not exist elsewhere!


  Should you want help us to adopt internationally known principles,
  that do NOT require to join any type of the amateur radio
  organizational system, i.e. the amateur radio society (that only wants
  to get our membership money), you are invited to lobby for us. Our
  conservative amateur society leadership also has their email address:
  yu0srj@eunet.yu (I suppose they may have more than one email address,
  but you may try to use this one).  You may also use an Internet search
  engine and scan for information related to "Savez radio amatera
  Jugoslavije" and "Savez radio amatera Srbije". Your help would be
  highly appreciated. Case you need more info regarding our national
  legal issues, do not hesitate to contact me.


  If you find yourself interested enough in making amateur radio rules
  and regulations better and more updated (say to spread the idea of
  liberalize the whole ICT areas and make them free of any kind of
  monopols), I would suggest you to look for your national radio amateur
  society and/or national telecommunication regulatory agency (like FCC
  in the USA). Lobby to them in order to remove the obsolete manual
  Morse proficiency test. In addition, should you have some
  opportunities to attend to some ICT meetings and conferences or
  something like that, you are also invited to let me know.


  Case we all do our best to remove obstacles mentioned above and allow
  the new people, who may wish to enjoy the amateur radio digital and
  Linux-related operations, to do so, the technology would become the
  part of more homes. I hope you, the readers, may help. So I look
  forward to hear from you soon!



  13.  Bibliography

  2005-10-09

  Notice: I often participate to (inter)national ICT conferences in
  Serbia & Montenegro, as well as abroad, presenting papers and having
  tutorials. For example, here you may see me
  <http://www.jisa.org.yu/Kongres/2005/slike/radni%20deo/radni%20deo%20800x600/Miroslav_Skoric_OkrRadvez.jpg>
  speaking to the audience. The picture was taken during a round table
  session in Herceg Novi
  <http://www.jisa.org.yu/Kongres/2005/Okruglisto_rad-kom_e.htm>. What I
  have been doing is to spread - as much as possible - the basic ideas
  and the useful mission of the amateur radio hobby. You bet, whenever
  possible I want my readers to make it with Linux. Besides that, I have
  been writing various articles for a variety of scientific and other
  magazines. Here you have a list of the articles I have written, and
  the papers submitted to the conferences until now.


  In case you want to re-publish or forward my volunteer paper works to
  some journals or other public media around, you are free to contact
  me. Some of my papers are written in Serbian Cyrillic, some of them
  are in English and some of them even combined!



        - "U prilog I.A.C.", MI (the youth scientists' organization
           newspaper), No. 69, 1990.

        - "U prilog I.A.C. (2)", MI (the youth scientists' organization
           newspaper), No. 70, 1990.

        - "Vise od radio-amaterskog hobija", Vojska, No. 163, 1995.

        - "Korak ka zvezdama", Vojska, No. 200, 1996.

        - "Die Gefahr von Innen - Internet gegen Amateurfunk",
           AMSAT-DL Journal, No. 4, Dez./Feb. 96/97.

        - "Kakva nam organizacija (ne) treba?", Radioamater,
           Feb. 1997.

        - "Kakva nam organizacija (ne) treba? (2)", Radioamater,
           Apr./May. 1997.

        - "Sateliti umiru padajuci", Vojska, No. 235, 1997.

        - "The Internet is not the Enemy", QST, Aug. 1998.

        - "Novi radio-amateri za novi vek", Antena, June 2000.

        - "Racunarske komunikacije putem radio-veza i
           zastita pristupa", Bezbednost, No. 3, 2000.

        - "Paket-radio - Racunarske komunikacije putem radio-veza",
           proceedings, "Info-Teh", Vrnjacka Banja, Serbia, 2001.

        - "Racunarske komunikacije putem radio-amaterskih veza",
           proceedings, "YU-Info", Kopaonik, Serbia, 2002.

        - "Computer Communications over radio", presentation,
          "Linux FEST", Belgrade, Serbia, 2002.

        - "Paket-radio - Radio-amaterske digitalne veze",
           proceedings, "Kongres JISA", Herceg Novi, Montenegro, 2002.

        - "Paket-radio (2) - Modemi za radio-veze",
           proceedings, "Info-Teh", Vrnjacka Banja, Serbia, 2002.

        - "Alternativne racunarske mreze", festival catalog,
          "INFOFEST", Budva, Montenegro, 2002.

        - "Alternative computer networks", proceedings, "TELFOR",
           Belgrade, Serbia, 2002.

        - "With rule and regulation improvements to the progress"
           proceedings, "TELFOR", Belgrade, Serbia, 2002.

        - "Racunarske komunikacije putem radio-amaterskih veza (2)",
           proceedings, "YU-Info", Kopaonik, Serbia, 2003.

        - "Racunarske komunikacije putem radio-amaterskih veza (3)",
           proceedings, "YU-Info", Kopaonik, Serbia, 2003.

        - "Paket-radio (3) - Programske mogucnosti na strani servera",
           proceedings, "Info-Teh", Vrnjacka Banja, Serbia, 2003.

        - "Paket-radio (4) - Legal rules and regulations in the amateur
           computer networks", proceedings, "Info-Teh", Vrnjacka Banja,
           Serbia, 2003.

        - "Packet-radio (2) - With rule and regulation improvements to the progress",
           proceedings, "Kongres JISA", Herceg Novi, Montenegro, 2003.

        - "Alternativne racunarske mreze (2)", festival catalog,
          "INFOFEST", Budva, Montenegro, 2003.

        - "Alternativne racunarske komunikacije putem radio-veza",
           Info M, 6-7/2003.

        - "Legal Rules and Regulations in the Amateur Radio Computer Networks",
           proceedings, "22nd ARRL and TAPR Digital Communications Conference",
           Hartford, CT USA, 2003.

        - "Favoritism", IEEE Potentials, Oct/Nov 2003

        - "Alternative computer networks (2)", proceedings, "TELFOR",
           Belgrade, Serbia, 2003.

        - "With rule and regulation improvements to the progress (2)"
           proceedings, "TELFOR", Belgrade, Serbia, 2003.

        - "XI Telekomunikacioni forum - TELFOR 2003", Info M, 8/2003.

        - "Aktivnosti organizacije IEEE Computer Society - YU Chapter"
          Info M, 8/2003.

        - "Yugoslavia IEEE Student Branch", IEEE Region 8 News,
          Vol. 7 No. 1, Feb/Mar 2004

        - "Radio-amaterske racunarske mreze", tutorial, "Info-Teh",
          Vrnjacka Banja, Serbia, 2004.

        - "Radio-amaterske racunarske mreze", tutorial, "Kongres
          JISA", Herceg Novi, Montenegro, 2004.

        - "The Amateur Radio as a Learning Technology in
          Developing Countries", proceedings, "ICALT/TEDC 2004",
          Joensuu, Finland, 2004.

        - "The Amateur Radio in Engineering Education", seminar,
          "IEEE-EESTEC Technical Conference 2004", Arcavacata
          di Rende (Cosenza), Italy, 2004.

        - "The Conference Low-Down", IEEE Potentials, Feb/Mar 2005

        - "ICALT 2004, IEEE Novi Sad SB, Serbia & Montenegro",
          IEEE Region 8 News, Vol. 8 No. 1, Mar 2005

        - "The Conference Low-Down", IEEE Potentials, Apr/May 2005

        - "The Amateur Radio Networking And Computing", proceedings,
          "PSU-UNS ICEE 2005", Novi Sad, Serbia, 2005

        - "Radio-amaterske racunarske mreze", tutorial, "Info-Teh",
          Vrnjacka Banja, Serbia, 2005 (intro: dr D. Surla, PMF)

        - "Radio-veze", round table session, "Kongres JISA", Herceg
          Novi, Montenegro, 2005.

        - "The New Amateur Radio University Network - AMUNET",
          proceedings, "9th WSEAS CSCC Multiconference",
          Vouliagmeni, Athens, Greece, 2005.

        - "The perspectives of the Amateur University Network -
          AMUNET", WSEAS Transactions on Communications, Vol 4,
          pp 834, Sep. 2005.

        - "Conferences in Serbia and Montenegro", IEEE Region 8 News,
          Vol. 8 No. 3, Sep 2005



  Besides these articles published and papers presented, I have been
  studying for an M.Sc. degree in computing. I am also the member of the
  following associations: IEEE Computer Society, IEEE Communications
  Society and ACM. In addition, I have been voluntarily working on
  establishing an academy computer network that would use the amateur
  radio stations as the media. Such networks exist somewhere else on the
  globe and I invite their administrators to contact me in order to
  cooperate.



  14.  Further information


  14.1.  Copyright

  Copyright (c) 2005 by Miroslav "Misko" Skoric, YT7MPB.

  Permission is granted to copy, distribute and/or modify this document
  under the terms of the GNU Free Documentation License, Version 1.1 or
  any later version published by the Free Software Foundation; with no
  Invariant Sections, with no Front-Cover Texts, and with no Back-Cover
  Texts.  A copy of the license is available from
  http://www.fsf.org/licenses/fdl.html.


  14.2.  Disclaimer


  Use the information in this document at your own risk. I disavow any
  potential liability of this document. Use of the concepts, examples,
  and/or other content of this document is entirely at your own risk.

  All copyrights are owned by their owners, unless specifically noted
  otherwise. Use of a term in this document should not be regarded as
  affecting the validity of any trademark or service mark.

  Naming of particular products or brands should not be seen as
  endorsements.

  You are strongly recommended to take a backup of your system before
  major installation and backups at regular intervals.


  14.3.  News


  This is not the first release of this mini-HOWTO. I hope to improve it
  whenever possible. Besides that, there are other documents that may
  help you to use amateur radio stuff on your computer. You may also
  look for AX.25 (mini-)HOWTO at the same location where you get this
  FBB mini-HOWTO.

  This mini-HOWTO would be improved from time to time. If you think that
  the HOWTO on your Linux installation CD is some out-of-date, you may
  check for newest release on the Internet. It could be found within the
  main Linux Documentation Project <http://www.linuxdoc.org/> homepage
  or this one: Linux Documentation Project <http://www.tldp.org/>.
  14.4.  Credits

  This version of mini-HOWTO can thanks to:



       Jean-Paul Roubelat, F6FBB, the author of FBB,
       Per Olsen, LA6CU, the author of FBB documentation,
       Jesus R., EB5AGF, the author of Protus,
       Jose Marte, HI8GN, the packer of 7.02g package,
       Paula Dowie, G8PZT, the author of Xrouter,
       Sima YT1SM, first translation HLP and TXT (v.5.15c)
       Sasa 4N7AM, first translation HLP and TXT (v.7.00b)
       Dragomir Kalaba, a local Linux 'guru'

       and a variety of helpful radio amateurs world-wide.



  Any comments or suggestions can be mailed to my email address: skoric
  at eunet dot yu


  14.5.  HOWTO

  These are intended as the primary starting points to get the
  background information as well as show you how to solve a specific
  problem.  Some relevant HOWTOs are Bootdisk, Installation,  SCSI and
  UMSDOS.  The main site for these is the LDP archive
  <http://metalab.unc.edu/LDP/> at Metalab (formerly known as Sunsite).


  14.6.  Mini-HOWTO

  These are the smaller free text relatives to the HOWTOs.  Some
  relevant mini-HOWTOs are Backup-With-MSDOS, Diskless, LILO, Large
  Disk, Linux+DOS+Win95+OS2, Linux+OS2+DOS, Linux+Win95,
  Linux+WindowsNT, Linux+NT-Loader, NFS-Root, Win95+Win+Linux, ZIP
  Drive, FBB packet-radio BBS etc.  You can find these at the same place
  as the HOWTOs, usually in a sub directory called mini. Note that these
  are scheduled to be converted into SGML and become proper HOWTOs in
  the near future.


  14.7.  Local Resources

  In most distributions of Linux there is a document directory
  installed, have a look in the /usr/doc directory.  where most packages
  store their main documentation and README files etc.  Also you will
  here find the HOWTO archive ( /usr/doc/HOWTO) of ready formatted
  HOWTOs and also the mini-HOWTO archive ( /usr/doc/HOWTO/mini
  <file:///usr/doc/HOWTO/mini>) of plain text documents.

  Many of the configuration files mentioned earlier can be found in the
  /etc directory. In particular you will want to work with the
  /etc/fstab file that sets up the mounting of partitions and possibly
  also /etc/mdtab file that is used for the md system to set up RAID.

  The kernel source in /usr/src/linux <file:///usr/src/linux> is, of
  course, the ultimate documentation. In other words, use the source,
  Luke.  It should also be pointed out that the kernel comes not only
  with source code which is even commented (well, partially at least)
  but also an informative documentation directory
  <file:///usr/src/linux/Documentation>.  If you are about to ask any
  questions about the kernel you should read this first, it will save
  you and many others a lot of time and possibly embarrassment.

  Also have a look in your system log file ( /var/log/messages) to see
  what is going on and in particular how the booting went if too much
  scrolled off your screen. Using tail -f /var/log/messages in a
  separate window or screen will give you a continuous update of what is
  going on in your system.

  You can also take advantage of the /proc file system that is a window
  into the inner workings of your system.  Use cat rather than more to
  view the files as they are reported as being zero length. Reports are
  that less works well here.


  14.8.  Web Pages

  There is a huge number of informative web pages out there and by their
  very nature they change quickly so don't be too surprised if these
  links become quickly outdated.

  A good starting point is of course the Linux Documentation Project
  <http://www.linuxdoc.org/> home page, or this one: Linux Documentation
  Project <http://www.tldp.org/>, an information central for
  documentation, project pages and much, much more.

  Please let me know if you have any other leads that can be of
  interest.



  15.  Getting help


  In the end you might find yourself unable to solve your problems and
  need help from someone else. The most efficient way is either to ask
  someone local or in your nearest Linux user group, search the web for
  the nearest one.

  Another possibility is to ask on Usenet News in one of the many, many
  newsgroups available. The problem is that these have such a high
  volume and noise (called low signal-to-noise ratio) that your question
  can easily fall through unanswered.

  No matter where you ask it is important to ask well or you will not be
  taken seriously. Saying just my disk does not work is not going to
  help you and instead the noise level is increased even further and if
  you are lucky someone will ask you to clarify.

  Instead describe your problems in some detail that will enable people
  to help you. The problem could lie somewhere you did not expect.
  Therefore you are advised to list up the following information on your
  system:


     Hardware

        ·  Processor

        ·  DMA

        ·  IRQ

        ·  Chip set (LX, BX etc)


        ·  Bus (ISA, VESA, PCI etc)

        ·  Expansion cards used (Disk controllers, video, IO etc)


     Software

        ·  BIOS (On motherboard and possibly SCSI host adapters)

        ·  LILO, if used

        ·  Linux kernel version as well as possible modifications and
           patches

        ·  Kernel parameters, if any

        ·  Software that shows the error (with version number or date)


     Peripherals

        ·  Type of disk drives with manufacturer name, version and type

        ·  Other relevant peripherals connected to the same buses


  Remember that booting text is logged to /var/log/messages which can
  answer most of the questions above. Obviously if the drives fail you
  might not be able to get  the log saved to disk but you can at least
  scroll back up the screen using the SHIFT and PAGE UP keys. It may
  also be useful to include part of this in your request for help but do
  not go overboard, keep it brief as a complete log file dumped to
  Usenet News is more than a little annoying.