<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML
><HEAD
><TITLE
>Cellular Phone Connection</TITLE
><META
NAME="GENERATOR"
CONTENT="Modular DocBook HTML Stylesheet Version 1.7"><LINK
REL="HOME"
TITLE="Linux Infrared HOWTO"
HREF="index.html"><LINK
REL="UP"
TITLE="Specific Connections and IrDA - Protocols"
HREF="infrared-howto-c-specific-connections.html"><LINK
REL="PREVIOUS"
TITLE="Connecting from Linux to WinCE 3.0 (aka PocketPC)"
HREF="infrared-howto-s-pocketpc-connection.html"><LINK
REL="NEXT"
TITLE="Digital Camera Connection"
HREF="infrared-howto-s-digital-camera-connection.html"></HEAD
><BODY
CLASS="sect1"
BGCOLOR="#FFFFFF"
TEXT="#000000"
LINK="#0000FF"
VLINK="#840084"
ALINK="#0000FF"
><DIV
CLASS="NAVHEADER"
><TABLE
SUMMARY="Header navigation table"
WIDTH="100%"
BORDER="0"
CELLPADDING="0"
CELLSPACING="0"
><TR
><TH
COLSPAN="3"
ALIGN="center"
>Linux Infrared HOWTO</TH
></TR
><TR
><TD
WIDTH="10%"
ALIGN="left"
VALIGN="bottom"
><A
HREF="infrared-howto-s-pocketpc-connection.html"
ACCESSKEY="P"
>Prev</A
></TD
><TD
WIDTH="80%"
ALIGN="center"
VALIGN="bottom"
>Chapter 3. Specific Connections and IrDA - Protocols</TD
><TD
WIDTH="10%"
ALIGN="right"
VALIGN="bottom"
><A
HREF="infrared-howto-s-digital-camera-connection.html"
ACCESSKEY="N"
>Next</A
></TD
></TR
></TABLE
><HR
ALIGN="LEFT"
WIDTH="100%"></DIV
><DIV
CLASS="sect1"
><H1
CLASS="sect1"
><A
NAME="infrared-howto-s-cellular-phone-connection"
></A
>3.10. Cellular Phone Connection</H1
><P
> As far as I know some cellular phones use the IrCOMM standard, e.g.
Ericsson SH888 and NOKIA 6110 (I'm not sure about the NOKIA 8110).
Some cellular phones (Ericsson T68) use the IrOBEX standard or IrMC.
For more and general information about Linux and cell phones see
<A
HREF="http://tuxmobil.org/phones_linux.html"
TARGET="_top"
>TuxMobil</A
>
. You may use IrCOMM to set up a PPP modem connection and OpenOBEX
to send or retrieve files (e.g. addressbook entries, logo, ringtones).
</P
><DIV
CLASS="sect2"
><H2
CLASS="sect2"
><A
NAME="AEN684"
></A
>3.10.1. Generic Instructions</H2
><P
> This chapter describes how to connect your mobile
phone via IrDA with your Linux box. It is based
on a report by Matthias Schmidt. It was
tested with the following mobiles:
</P
><P
>
<P
></P
><UL
><LI
><P
>Ericsson T39m</P
></LI
><LI
><P
>Siemens S25</P
></LI
><LI
><P
>Siemens S35i</P
></LI
><LI
><P
>Siemens ME45</P
></LI
><LI
><P
>Nokia 6110</P
></LI
><LI
><P
>Nokia 6210</P
></LI
></UL
>
</P
><P
> Configure the IrDA basics as described above (kernel configuration,
/etc/modules.conf, irattach, PPP) (for detailed
information about PPP see also the
<A
HREF="http://tldp.org/HOWTO/PPP-HOWTO/"
TARGET="_top"
>PPP-HOWTO</A
>.
Now check whether your mobile phone was found:
<TABLE
BORDER="0"
BGCOLOR="#E0E0E0"
WIDTH="100%"
><TR
><TD
><FONT
COLOR="#000000"
><PRE
CLASS="programlisting"
> # irdadump
xid:rsp be1eb736 > 08666644 S=6 s=4 SIEMENS S35 hint=9024 [ Modem IrCOMM IrOBEX ] (28)
# irdadump
xid:rsp be1eb736 > 35450000 S=6 s=4 Nokia 6100 hint=8101 [ PnP Telephony ] (28)
# irdadump
xid:rsp be1eb736 > 04489982 S=6 s=5 SIEMENS ME45 hint=b124 [ PnP Modem Fax IrCOMM IrOBEX ] (29)
</PRE
></FONT
></TD
></TR
></TABLE
>
</P
><DIV
CLASS="sect3"
><H3
CLASS="sect3"
><A
NAME="AEN704"
></A
>3.10.1.1. PPP dial-up Software</H3
><DIV
CLASS="sect4"
><H4
CLASS="sect4"
><A
NAME="AEN706"
></A
>3.10.1.1.1. minicom</H4
><P
> There are several ways to connect to your ISP. The easiest
(and sometimes the only) way is to
use a terminal program like <B
CLASS="command"
>minicom</B
>.
</P
></DIV
><DIV
CLASS="sect4"
><H4
CLASS="sect4"
><A
NAME="AEN710"
></A
>3.10.1.1.2. wvdial</H4
><P
> If you prefer more comfort, you can use
<A
HREF="http://www.worldvisions.ca/wvdial/"
TARGET="_top"
>wvdial</A
>.
It's easy to configure and it works
with a lot of roaming providers and the german Tante T. gh0st and me did
some testing yesterday and we weren't able to connect to
the dial-in server of the HRZ with wvdial. wvdial
always failed with "Bad password", because the server
respondend faster that the mobile softmodem could send
the login and password strings.
See the standard ppp config below.
<TT
CLASS="filename"
>/etc/wvdial.conf</TT
>:
<TABLE
BORDER="0"
BGCOLOR="#E0E0E0"
WIDTH="100%"
><TR
><TD
><FONT
COLOR="#000000"
><PRE
CLASS="programlisting"
> [Dialer Defaults]
Modem = /dev/ircomm0
Baud = 9600
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Password = internet
Username = internet
Phone = 00393492002800
ISDN = 0
Modem Type = Analog Modem
[Dialer shh]
Init3 = ATM0
</PRE
></FONT
></TD
></TR
></TABLE
>
</P
></DIV
><DIV
CLASS="sect4"
><H4
CLASS="sect4"
><A
NAME="AEN716"
></A
>3.10.1.1.3. PPP Tools</H4
><P
> Problems with wvdial (see explanation above)? IMHO the best way is to use the standard
<A
HREF="ftp://ftp.linuxcare.com.au/pub/ppp/"
TARGET="_top"
>PPP tools</A
>
. You can configure
them via <B
CLASS="command"
>pppconfig</B
>, start with <B
CLASS="command"
>pon</B
>
and stop connection with <B
CLASS="command"
>poff</B
>.
</P
><P
>
Example files for PPP with a connection named <TT
CLASS="filename"
>irda</TT
>:
<TT
CLASS="filename"
>/etc/ppp/pap-secrets</TT
>
<TABLE
BORDER="0"
BGCOLOR="#E0E0E0"
WIDTH="100%"
><TR
><TD
><FONT
COLOR="#000000"
><PRE
CLASS="programlisting"
> # username connection-name password
test irda test
</PRE
></FONT
></TD
></TR
></TABLE
>
<TT
CLASS="filename"
>/etc/ppp/peers/irda</TT
>
<TABLE
BORDER="0"
BGCOLOR="#E0E0E0"
WIDTH="100%"
><TR
><TD
><FONT
COLOR="#000000"
><PRE
CLASS="programlisting"
> hide-password
noauth
connect "/usr/sbin/chat -v -f /etc/chatscripts/irda"
debug
/dev/ircomm0
9600
defaultroute
noipdefault
user test
remotename irda
ipparam irda
usepeerdns
</PRE
></FONT
></TD
></TR
></TABLE
>
<TT
CLASS="filename"
>/etc/chatscripts/irda</TT
>
<TABLE
BORDER="0"
BGCOLOR="#E0E0E0"
WIDTH="100%"
><TR
><TD
><FONT
COLOR="#000000"
><PRE
CLASS="programlisting"
> ABORT BUSY ABORT 'NO CARRIER' ABORT VOICE ABORT 'NO DIALTONE'
ABORT 'NO DIAL TONE' ABORT 'NO ANSWER' ABORT DELAYED
'' ATZ
# dial-in number of the ISP
OK-AT-OK ATDT<YOUR_ISP_PHONE_NUMBER>
CONNECT \d\c
</PRE
></FONT
></TD
></TR
></TABLE
>
</P
></DIV
></DIV
><DIV
CLASS="sect3"
><H3
CLASS="sect3"
><A
NAME="AEN731"
></A
>3.10.1.2. Logos, Sounds, SMS, ...</H3
><P
> If you get your mobile working via infrared, you can do some nice stuff
with it. You can save your phonebook or your SMS, send SMS, put new
logos (BMP format) on it, save the old logo to your harddisk and do the same with
your ringtones (MIDI). To do all this nice things, you'll need the following:
</P
><P
>
<P
></P
><UL
><LI
><P
>a OBEX capable mobile phone, e.g. a Siemens mobile-phone
</P
></LI
><LI
><P
>a working infrared connection
</P
></LI
><LI
><P
>the <A
HREF="http://www.hendrik-sattler.de/scmxx/"
TARGET="_top"
>scmxx</A
> tool
</P
></LI
><LI
><P
>gscmxx (optional)
</P
></LI
></UL
>
</P
><P
> Bind your mobile phone to IrDA services
<TABLE
BORDER="0"
BGCOLOR="#E0E0E0"
WIDTH="100%"
><TR
><TD
><FONT
COLOR="#000000"
><PRE
CLASS="programlisting"
>
# irattach /dev/ttyS1 -s
IrDA: Registered device irda0
</PRE
></FONT
></TD
></TR
></TABLE
>
</P
><P
>
Check the connection
<TABLE
BORDER="0"
BGCOLOR="#E0E0E0"
WIDTH="100%"
><TR
><TD
><FONT
COLOR="#000000"
><PRE
CLASS="programlisting"
> # irdadump
xid:cmd 9d5dcefa < ffffffff S=6 s=3 (14)
xid:cmd 9d5dcefa < ffffffff S=6 s=4 (14)
xid:rsp 9d5dcefa > 08666644 S=6 s=3 SIEMENS S35 hint=9024 [ Modem IrCOMM IrOBEX ] (28)
</PRE
></FONT
></TD
></TR
></TABLE
>
</P
><P
> Show general information about your mobile phone
<TABLE
BORDER="0"
BGCOLOR="#E0E0E0"
WIDTH="100%"
><TR
><TD
><FONT
COLOR="#000000"
><PRE
CLASS="programlisting"
> # scmxx -i
Accessing device /dev/ircomm0
OK, a modem device is present.
Vendor: SIEMENS
Model: S35i
Revision: 20
Serial (Phone): xxxxxxxxxxxxxxx
Serial (SIM): xxxxxxxxxxxxxxx
SIM-ID: xxxxxxxxxxxxxxxxxxxxx
Operator: D2
SMS Server: +491722270333
Charset: GSM
Battery: 40%
Signal/BER: -79 dBm/?
Time: 02/10/07,11:48:49
Readable Slots: bmp: 0-1, mid: 0, vcs: 1-30
Phonebooks: FD, SM, ON, ME, LD, MC, RC, OW, MS, CD, BL, RD, CS
SMS storages: SM
</PRE
></FONT
></TD
></TR
></TABLE
>
</P
><P
> Save your phonebook to disk
<TABLE
BORDER="0"
BGCOLOR="#E0E0E0"
WIDTH="100%"
><TR
><TD
><FONT
COLOR="#000000"
><PRE
CLASS="programlisting"
> # scmxx -g -PSM -f phonebook
Accessing device /dev/ircomm0
OK, a modem device is present.
Detected SIEMENS S35i
phonebook created.
Receiving: 1 2 3 4 5 6 7 8 9 [...]
Received all gettable entries
</PRE
></FONT
></TD
></TR
></TABLE
>
</P
><P
> Show your SMS (here in slot 3)
<TABLE
BORDER="0"
BGCOLOR="#E0E0E0"
WIDTH="100%"
><TR
><TD
><FONT
COLOR="#000000"
><PRE
CLASS="programlisting"
> # scmxx -g -S3 -f -
Accessing device /dev/ircomm0
OK, a modem device is present.
Detected SIEMENS S35i
Looking for SMS of specified type...
Receiving incoming, read SMS from slot 3.
Slot: 3
From: xxxxxxxxxxxxxx
Date: 2002-10-03 23:11:47 (GMT+0)
SMSC number: xxxxxxxxxxxxxxxx
PDU type: SMS-DELIVER MMS
Data Coding Scheme: 7bit-GSM
Message length: 160
Message:
xxxxxxxxxxxxxxxxxxxxxxxxxx
</PRE
></FONT
></TD
></TR
></TABLE
>
</P
><P
> Save your current logo to disk
<TABLE
BORDER="0"
BGCOLOR="#E0E0E0"
WIDTH="100%"
><TR
><TD
><FONT
COLOR="#000000"
><PRE
CLASS="programlisting"
> # scmxx -g -B0 -f logo.bmp
Accessing device /dev/ircomm0
OK, a modem device is present.
Detected SIEMENS S35i
Slot 0...
Receiving packet 1 of 5...
logo.bmp created.
Receiving packet 2 of 5...
Receiving packet 3 of 5...
Receiving packet 4 of 5...
Receiving packet 5 of 5...
File transfer complete.
</PRE
></FONT
></TD
></TR
></TABLE
>
</P
><P
> Save your current ringtone to disk
<TABLE
BORDER="0"
BGCOLOR="#E0E0E0"
WIDTH="100%"
><TR
><TD
><FONT
COLOR="#000000"
><PRE
CLASS="programlisting"
> # scmxx -g -M0 -f sound.mid
Accessing device /dev/ircomm0
OK, a modem device is present.
Detected SIEMENS S35i
Slot 0...
Receiving packet 1 of 1...
sound.mid created.
File transfer complete.
</PRE
></FONT
></TD
></TR
></TABLE
>
</P
></DIV
></DIV
><DIV
CLASS="sect2"
><H2
CLASS="sect2"
><A
NAME="AEN759"
></A
>3.10.2. OBEX Connection</H2
><P
> See the OpenOBEX chapter below. Detailed information about
OBEX connections to mobile phones will follow soon hopefully.
See also the Palm III section for information about setting up a connection.
</P
></DIV
><DIV
CLASS="sect2"
><H2
CLASS="sect2"
><A
NAME="AEN762"
></A
>3.10.3. Specific Mobile Phones</H2
><DIV
CLASS="sect3"
><H3
CLASS="sect3"
><A
NAME="AEN764"
></A
>3.10.3.1. Motorola</H3
><P
> Michael McConnell
has posted an initial version of a guide to get the Motorola Timeport GSM
phone and Linux-IrDA talking on
<A
HREF="http://www.eridani.co.uk/docs/linux-timeport/"
TARGET="_top"
>his website</A
>.
</P
></DIV
><DIV
CLASS="sect3"
><H3
CLASS="sect3"
><A
NAME="AEN768"
></A
>3.10.3.2. Ericsson</H3
><P
> Note for T39 users (maybe for T300, too).
Please check the web page of
<A
HREF="http://www.hpl.hp.com/personal/Jean_Tourrilhes/IrDA/index.html"
TARGET="_top"
>Jean Tourrilhes</A
>
, you will need to apply kernel patches and tweak
<TT
CLASS="filename"
>/proc/sys/net/irda/max_tx_window</TT
>
</P
><P
> 1. Configuration
To start a communication session with <TT
CLASS="filename"
>/dev/ircomm0</TT
> , for instance, say:
<TABLE
BORDER="0"
BGCOLOR="#E0E0E0"
WIDTH="100%"
><TR
><TD
><FONT
COLOR="#000000"
><PRE
CLASS="programlisting"
> dip -t
> port ircomm0
> term
</PRE
></FONT
></TD
></TR
></TABLE
>
Probably you may use <B
CLASS="command"
>cu</B
> or <B
CLASS="command"
>xc</B
> instead of
<B
CLASS="command"
>dip</B
>, too <B
CLASS="command"
>cu -l /dev/ircomm0</B
>
or <B
CLASS="command"
>xc -l /dev/ircomm0</B
>. There are also reports
about some efforts with
the Ericsson GF768 and IR Modem DI 27.
</P
><P
> Benny Amorsen wrote: The SH888 emulates an IRDA-port when you connect
it using the serial cable. Why someone would think up something weird
like that is beyond me, but that is the way you get it to work in
Windows. Not that I ever managed to make it work in Windows, though.
</P
><P
> Ales Dryak has send this survey (looks like a Debian/GNU Linux
distribution, please modify your configuration accordingly). Mobile
Ericsson SH888 <B
CLASS="command"
>ati1 = 980408 1035 PRGCXC125101</B
>:
</P
><P
>
<TABLE
BORDER="0"
BGCOLOR="#E0E0E0"
WIDTH="100%"
><TR
><TD
><FONT
COLOR="#000000"
><PRE
CLASS="programlisting"
> mknod /dev/ircomm0 c 161 0
mknod /dev/ircomm1 c 161 1
</PRE
></FONT
></TD
></TR
></TABLE
>
2. /etc/conf.modules:
<TABLE
BORDER="0"
BGCOLOR="#E0E0E0"
WIDTH="100%"
><TR
><TD
><FONT
COLOR="#000000"
><PRE
CLASS="programlisting"
> alias tty-ldisc-11 irtty
alias char-major-161 ircomm-tty
</PRE
></FONT
></TD
></TR
></TABLE
>
3. /etc/irda/drivers: irattach /dev/ttyS0 -s # (IrDA port in SIR mode)
4. /etc/chatscripts/sh888
<TABLE
BORDER="0"
BGCOLOR="#E0E0E0"
WIDTH="100%"
><TR
><TD
><FONT
COLOR="#000000"
><PRE
CLASS="programlisting"
> <ABORT stuff>
"" \d\d\d\d\d\dATZE0
OK ATD<phone number to call)
CONNECT \d\c
</PRE
></FONT
></TD
></TR
></TABLE
>
5. /etc/ppp/peers/sh888
<TABLE
BORDER="0"
BGCOLOR="#E0E0E0"
WIDTH="100%"
><TR
><TD
><FONT
COLOR="#000000"
><PRE
CLASS="programlisting"
> noauth
connect "/usr/sbin/chat -v -f /etc/chatscripts/sh888"
/dev/ircomm
115200
defaultroute
noipdefault
user <your username> # don't forget to add your password to chap secrets or chat script
</PRE
></FONT
></TD
></TR
></TABLE
>
</P
><P
> A few seconds (app. 30) after executing
<B
CLASS="command"
>pppd call sh888</B
> I get
connected to our Intranet/Internet having full IP connectivity
(telnet, ftp, www, icmp tested). Futhermore I can connect to
<TT
CLASS="filename"
>/dev/ircomm</TT
>
using <B
CLASS="command"
>minicom</B
> and play with AT command. Great! And looks
stable!
</P
><DIV
CLASS="sect4"
><H4
CLASS="sect4"
><A
NAME="AEN793"
></A
>3.10.3.2.1. Tools</H4
><P
> Gerhard Gonter reported: Several members of the list are successfully
using the Ericsson mobile phone SH888 with the Linux-IrDA software,
usually to use it as a modem. The software is also quite useful to
access other parts of the phone using AT commands. The built-in
phonebook is an interesting target.
</P
><P
> After A quick research on the Internet (FreshMeat, Deja, YAHOO), I did
not find any phonebook tool for Linux (or another Unix). To solve that
problem, I wrote a small Perl script and a related module. Since this
now works acceptably well for me, I decided to wrap that up and
release it at this early stage of development. The tarball can be
retrieved
<A
HREF="http://falbala.wu-wien.ac.at:8684/pub/english.cgi/0/172903"
TARGET="_top"
>here</A
>
.
</P
><P
> In the mailing list <B
CLASS="command"
>gsmlib</B
> was also recommended, though ... there was
no way for me to use this over infrared, no connection with my sh888.
Florian Lohoff reported: Works (kind of) with the S25. I needed to
change a ifdef as it seems the S25 does not respond with CR LF. But
setting a link from /dev/mobilephone -> /dev/ircomm lets me send SMS
via the S25 without a problem. Phonebook backup does NOT work because
the S25 does some silly responses to probably empty phonebooks.
</P
><P
> The specifications for SMS messages and phone books can be downloaded
free (of charge, not FSF free ;-) from ETSI. Search for GSM 07.07 (you
might also want GSM 07.05). You have to register before downloading
it. The standards are in Acrobat PDF format. The S25 supported
commands are available on the Siemens websites as a PDF for free.
</P
><P
> A survey of the AT commands for the SH888 is at
<A
HREF="http://mobileinternet.ericsson.se/emi_download/sh888/888_R1D.pdf"
TARGET="_top"
>Ericsson</A
>
.
</P
></DIV
></DIV
><DIV
CLASS="sect3"
><H3
CLASS="sect3"
><A
NAME="AEN803"
></A
>3.10.3.3. NOKIA</H3
><P
> Carlos Vidal wrote: Correct me if I'm wrong, but it seems to me that
Nokia telephones do not contain a genuine hardware modem, but
something which is similar in principle to WinModems for PC. Whenever
Nokia writes about modem communication, they use the name "Windows
software modem" (or something similar). Which is actually backed up by
the need to use special Nokia software for Windows (called Nokia
Cellular Data Suite).
</P
><P
> Joonas Lehtinen wrote: This is true with 61xx models. Models: 8810,
9000(i) and 9110 should work fine. (They have inbuilt modem). My Nokia
9000 reports IrCOMM with linux.
</P
><P
> Some suggestion by Carlos Vidal carlos_at_tarkus.se : "I'm doing some
tests trying to see how far can I get with my Nokia 6110 on Linux.
I've just compiled gnokii-0.2.4 [
<A
HREF="http://www.gnokii.org/"
TARGET="_top"
>gnokii</A
>
is a tool set for Nokia mobile phones connected via serial cable for Linux and *BSD
, WH], but it doesn't work [please check current <B
CLASS="command"
>gnokii</B
>
, the behaviour should have been improved, there is also useful
documentation about IrDA connections to phones, WH]. As I have Nokia Data Suite I did the following connection:
</P
><P
> Nokia 6110 <-- Nokia Cable --> PC/Linux <-- Null-modem cable -->
PC/W95
</P
><P
> In the PC/Linux I run the program snooper (by Jun-ichiro itojun Itoh
, sorry couldn't find an URL maybe some other
sniffer will do it also, e.g. sniffit, see also appendix about serial
sniffers, WH) with small modifications in order to configure the
serial port correctly.
</P
><P
> Normally, if snooper has the correct baud rate, the phone and the
PC/W95 should communicate as if there was no snooper in between. This
worked pretty well when I cracked the protocol of my Minolta camera.
The problem here is that the phone doesn't answer or hangs after a
while.
</P
><P
> It seems that the timing is quite important during the initial phase
of the communication. The log I obtain is:
</P
><P
> <TABLE
BORDER="0"
BGCOLOR="#E0E0E0"
WIDTH="100%"
><TR
><TD
><FONT
COLOR="#000000"
><PRE
CLASS="programlisting"
> 0>1: UUUUUUUUUUUUUUUUUUUUUUUU
line 0: LE *DTR *RTS ST SR CTS CD RI *DSR
line 1: LE *DTR *RTS ST SR CTS CD RI *DSR
0>1: UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU
UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU
UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU
UUUUUUUUUUUUUUU\x1e\x00\x0c\x02\x00\x09\x00\x01\x00\x0d\x00\x00\x02\x01@\x00P\x
06
1>0: \x18\x00\x00\x00\xfc\x18\x00\x00\x00\x00\x00\x00\xc0\xf0
0>1: \x1e\x00\x0c\x02\x00\x09\x00\x01\x00\x0d\x00\x00\x02\x01@\x00P\x06
1>0: \x18\x00\x00\x00\x18\x00\x00\xc0\xf0\x18\x00\x00\x00\x00\x00\x00\xc0\xf0
0>1: \x1e\x00\x0cd\x00\x06\x00\x01\x00\x10\x01`\x13\x13
1>0: \x18\x00\x00\xf0\x00\x00\xfc
0>1: \x1e\x00\x0cd\x00\x06\x00\x01\x00\x10\x01`\x13\x13
</PRE
></FONT
></TD
></TR
></TABLE
>
0 is the PC/95 and 1 is the phone. The communication starts with a
stream of 'U' (0x55) and with DSR/DTR on. The phone answers with '0x18
0x00 ...'. This dialog continues for a while as if both were deaf and
finally the phone crashes and the only way to reset it is to remove
the batteries!
</P
><P
> I guess that what happens is that the phone is trying to find the
correct baud-rate and fails because of the delays introduced by
snooper. This probably has to do with some IrDA protocol used with
also with the infrared connection."
</P
><P
> Wessel de Roode "I managed to get the
Discovery IR hint bits (with my Palm Pilot):
</P
><P
> <TABLE
BORDER="0"
BGCOLOR="#E0E0E0"
WIDTH="100%"
><TR
><TD
><FONT
COLOR="#000000"
><PRE
CLASS="programlisting"
> Discover:
0:xxxxxxxx:81.01
01 IR_HINT_PNP 01 IR_HINT_TELEPHONY (IrMC ?)
80 IR_HINT_EXT
Device info query:
\006Device\012DeviceName
4e 6f 6b 69 61 20 36 31 30 30 Nokia 6100
</PRE
></FONT
></TD
></TR
></TABLE
>
I also managed to query the PNP device of the Nokia. It has one PNP
device. It's PNPC100 which equalt a 9600 baud modem. I deleted the
query, if somene can send me a hint to restore it. was somthing like
IrDA:<dunno>:PNP:Comp#01 The same query with IrDA:<dunno>:PNP:CompCnt
gives the number of PNP-devices are available in the Nokia. Which is
here only one."
</P
><P
> There are also reports about gsmlib for sending and receiving sms
messages, updating address books etc). These functions are working,
except for minor charset problems.
</P
><DIV
CLASS="sect4"
><H4
CLASS="sect4"
><A
NAME="AEN821"
></A
>3.10.3.3.1. Recommended Tools</H4
><P
> <A
HREF="http://www.gnokii.org"
TARGET="_top"
>gnokii</A
>
is a Linux/Unix tool suite and soon to be modem/fax driver
for Nokia (GSM) mobile phones. Phones supported include 3110,
3810, 8110, 5110, 6110 and their derivatives.
</P
></DIV
></DIV
><DIV
CLASS="sect3"
><H3
CLASS="sect3"
><A
NAME="AEN825"
></A
>3.10.3.4. Siemens</H3
><P
> Configuration
By Florian Lohoff: "Do it step by step - Get your
irda working <B
CLASS="command"
>irattach /dev/ttySx</B
> etc. Then have a look at the
<TT
CLASS="filename"
>/proc/net/irda/discovery</TT
>
whether you find something like this:
</P
><P
>
<TABLE
BORDER="0"
BGCOLOR="#E0E0E0"
WIDTH="100%"
><TR
><TD
><FONT
COLOR="#000000"
><PRE
CLASS="programlisting"
> (flo@paradigm)~# cat /proc/net/irda/discovery
IrLMP: Discovery log:
nickname: SIEMENS S25, hint: 0x9024, saddr: 0x4286ce23, daddr: 0x04295741
</PRE
></FONT
></TD
></TR
></TABLE
>
Now load ircomm and ircomm-tty and normally(tm) you should be able to
connect to the correct /dev/ircomm and you can easily dial and
load/backup the phonebook etc ...", e.g. with minicom.
</P
><P
> Timo Felbinger describes the connection between a Toshiba and a
Siemens S25:
</P
><P
>
<P
></P
><UL
><LI
><P
> kernel 2.2.12 and patch-2.2.12-irda3, IrDA support in the kernel,
ircomm and ircomm-tty as a module
</P
></LI
><LI
><P
> <B
CLASS="command"
>mknod /dev/ircomm0 c 161 0</B
>
</P
></LI
><LI
><P
> <B
CLASS="command"
>modprobe ircomm</B
>, <B
CLASS="command"
>modprobe ircomm-tty</B
>
</P
></LI
><LI
><P
> start irattach with modprobe toshoboe in the start section of
/etc/irda/drivers . Note: don't load toshoboe before the
irattach, this may cause device or resource busy
</P
></LI
><LI
><P
> after <B
CLASS="command"
>dip -t</B
> and the command port ircomm0 the S25 shows a
connection. Note: the IR port of the S25 has to be activated of
course, the distance between the two devices seems not critical.
</P
></LI
><LI
><P
> After term the S25 behaves like the usual Hayes modem and can be
used with the AT commands.
</P
></LI
><LI
><P
> dial-out with pppd works out of the box.
</P
></LI
></UL
>
</P
><DIV
CLASS="sect4"
><H4
CLASS="sect4"
><A
NAME="AEN853"
></A
>3.10.3.4.1. Recommended Tools</H4
><P
> <A
HREF="http://www.hendrik-sattler.de/scmxx"
TARGET="_top"
>SCMxx</A
>
can copy files to and from a Siemens mobile phone and also delete
stored files. Files can read from a given file or through stdin and stored to
a given file or stdout. SMS can also be directly sent or received without
storing in the mobile phone. SCMxx was tested with several mobile phones
manufactured by Siemens (only S25 and later).
</P
></DIV
></DIV
></DIV
><DIV
CLASS="sect2"
><H2
CLASS="sect2"
><A
NAME="AEN857"
></A
>3.10.4. German e-plus</H2
><P
> A note to German e-plus users:
</P
><P
> Every e-plus contract (except Free&Easy) contains a PPP conncetion to
the WWW (no separate registration necessary). This service is
available around Germany under the phone number 123100. This worked
also out of the box.
</P
><P
> pppd configuration:
</P
><P
>
<TABLE
BORDER="0"
BGCOLOR="#E0E0E0"
WIDTH="100%"
><TR
><TD
><FONT
COLOR="#000000"
><PRE
CLASS="programlisting"
> /dev/ircomm0
defaultroute
netmask 255.255.255.0
debug
mtu 552
crtscts
noauth
connect '/usr/sbin/chat -v -f /etc/ppp/eplus.chat'
chat script /etc/ppp/eplus.chat:
</PRE
></FONT
></TD
></TR
></TABLE
>
</P
><P
>
<TABLE
BORDER="0"
BGCOLOR="#E0E0E0"
WIDTH="100%"
><TR
><TD
><FONT
COLOR="#000000"
><PRE
CLASS="programlisting"
> ABORT "BUSY"
ABORT "ERROR"
ABORT "NO CARRIER"
ABORT "NO DIALTONE"
ABORT "NO ANSWER"
SAY "initializing modem..."
"" "AT"
"OK" "ATZ"
SAY "dialing..."
"OK" "ATDT123100"
SAY "waiting for CONNECT..."
"CONNECT" ""
SAY "connected!"
SAY ""
</PRE
></FONT
></TD
></TR
></TABLE
>
For the nameserver you may use 192.76.144.66 . Username or password
are not necessary.
</P
></DIV
></DIV
><DIV
CLASS="NAVFOOTER"
><HR
ALIGN="LEFT"
WIDTH="100%"><TABLE
SUMMARY="Footer navigation table"
WIDTH="100%"
BORDER="0"
CELLPADDING="0"
CELLSPACING="0"
><TR
><TD
WIDTH="33%"
ALIGN="left"
VALIGN="top"
><A
HREF="infrared-howto-s-pocketpc-connection.html"
ACCESSKEY="P"
>Prev</A
></TD
><TD
WIDTH="34%"
ALIGN="center"
VALIGN="top"
><A
HREF="index.html"
ACCESSKEY="H"
>Home</A
></TD
><TD
WIDTH="33%"
ALIGN="right"
VALIGN="top"
><A
HREF="infrared-howto-s-digital-camera-connection.html"
ACCESSKEY="N"
>Next</A
></TD
></TR
><TR
><TD
WIDTH="33%"
ALIGN="left"
VALIGN="top"
>Connecting from Linux to WinCE 3.0 (aka PocketPC)</TD
><TD
WIDTH="34%"
ALIGN="center"
VALIGN="top"
><A
HREF="infrared-howto-c-specific-connections.html"
ACCESSKEY="U"
>Up</A
></TD
><TD
WIDTH="33%"
ALIGN="right"
VALIGN="top"
>Digital Camera Connection</TD
></TR
></TABLE
></DIV
></BODY
></HTML
>
