sniff 0				# 0 = not setting PROMISC mode
				# 1 = put interface in PROMISC mode

database mysql			# must be mysql for now
				
mysql_user acct			# usually you don't need to change this

mysql_password acct_password	# change this to your password

mysql_host localhost		# sometimes you need to change this to
				# 127.0.0.1 instead of localhost

mysql_port 0			# mysql port, 0 if you are using a socket

mysql_database netacct		# usually you don't need to change this

pidfile  /var/run/nacctd.pid	# set pid file
				# tis will help if you want to
				# two (or more) nacctd on same machine

compactnet 62.73.77.0 255.255.255.0
compactnet 192.168.1.0 255.255.255.0

 				# log traffic only for these networks 
				# all other packets are NOT logged
				
ournet 62.73.77.0 255.255.255.0

				# Ours IP nets for diferenciation of
				# peering traffic types

direct_peer 217.75.132.0 255.255.255.0
direct_peer 62.176.90.0 255.255.255.0
direct_peer 212.72.212.0 255.255.255.0
direct_peer 217.75.136.0 255.255.255.0
direct_peer 194.12.226.80 255.255.255.240
direct_peer 194.12.233.96 255.255.255.224
direct_peer 194.12.233.160 255.255.255.224

				# log traffic between 2 or more regional ISP-s

flush 300                       # flush every 5 minutes
				# this gives the interval in seconds
				# when the accumulated data is flushed
				# to the output file

errdelay 2
fdelay 60

notdev eth1			# Dont log entries for this device
                                # Use this on routers that you dont
                                # log forwarded packets twice.

device eth0                     # device to put into promiscous mode
				# you can specify as many as you want
				# and you don't have to specify one
				# (e.g. if this runs on your router)
				#
				# if you plan to use it on some *BSD
				# system put here apropriate device
				# i.e. - device ep0

# iflimit eth0			# on machines with multiple interfaces,
				# log only packets on this interface
				# mutually exclusive with hostlimit

# ignoremask 255.255.255.0        # Ignore traffic on same class C net
				# This means traffic that is on
				# your local LAN is not counted.
				# This is useful for NFS etc.
				# Not giving this option causes everything
				# to be counted.
				# This can degrade performance seriously!

ignorenet 127.0.0.0 255.0.0.0   # ignore loopback net
				# You can define as many ignorenets as
				# you want. Ignoring a net with
				# ignorenet is not as efficient as
				# ignoremask. Thus you should exclude
				# your local network with ignoremask,
				# not with ignorenet (although this is
				# is possible).

debug 0                         # set debugging level
debugfile /tmp/nacctd.debug	# where to put debugging info