# -*- Mode: rpm-spec -*-
#
# This Specfile is based on kernel-tmb spec done by
# Thomas Backlund <tmb@mandriva.org>
#
# The mkflavour() macroization done by Anssi Hannula <anssi@mandriva.org>
#
# Manbo kernels now use kernel.org versioning
#
%define kernelversion 2
%define patchlevel 6
%define sublevel 31
# Package release
%define kbuild 2
%define rsbacver 1.4.2
# kernel Makefile extraversion is substituted by
# kpatch/kgit/kstable wich are either 0 (empty), rc (kpatch), git (kgit)
# or stable release (kstable)
%define kpatch 0
%define kstable 0
# kernel.org -gitX patch (only the number after "git")
%define kgit 0
# Used when building update candidates
#define uclevel uc1
%define devel_notice %{?uclevel:NOTE: This is work-in-progress (WIP) development kernel.}
# Patch tarball tag
%define ktag rsbac
%define kname kernel-%{ktag}
%define rpmtag %distsuffix
%if %kpatch
%if %kgit
%define rpmrel %mkrel 0.%{kpatch}.%{kgit}.%{kbuild}
%else
%define rpmrel %mkrel 0.%{kpatch}.%{kbuild}
%endif
%else
%define rpmrel %mkrel %{kbuild}
%endif
# theese two never change, they are used to fool rpm/urpmi/smart
%define fakever 1
%define fakerel %mkrel 1
# When we are using a pre/rc patch, the tarball is a sublevel -1
%if %kpatch
%define kversion %{kernelversion}.%{patchlevel}.%{sublevel}
%define tar_ver %{kernelversion}.%{patchlevel}.%(expr %{sublevel} - 1)
%define patch_ver %{kversion}-%{kpatch}-%{ktag}%{kbuild}
%else
%if %kstable
%define kversion %{kernelversion}.%{patchlevel}.%{sublevel}.%{kstable}
%define tar_ver %{kernelversion}.%{patchlevel}.%{sublevel}
%else
%define kversion %{kernelversion}.%{patchlevel}.%{sublevel}
%define tar_ver %{kversion}
%endif
%define patch_ver %{kversion}-%{ktag}%{kbuild}
%endif
%define kverrel %{kversion}-%{rpmrel}
# used for not making too long names for rpms or search paths
%if %kpatch
%if %kgit
%define buildrpmrel 0.%{kpatch}.%{kgit}.%{kbuild}%{?uclevel:.%{uclevel}}%{rpmtag}
%else
%define buildrpmrel 0.%{kpatch}.%{kbuild}%{?uclevel:.%{uclevel}}%{rpmtag}
%endif
%else
%define buildrpmrel %{kbuild}%{?uclevel:.%{uclevel}}%{rpmtag}
%endif
%define buildrel %{kversion}-%{buildrpmrel}
# having different top level names for packges means that you have to remove
# them by hard :(
%define top_dir_name %{kname}-%{_arch}
%define build_dir ${RPM_BUILD_DIR}/%{top_dir_name}
%define src_dir %{build_dir}/linux-%{tar_ver}
# disable useless debug rpms...
%define _enable_debug_packages %{nil}
%define debug_package %{nil}
# Build defines
%define build_doc 1
%define build_source 1
%define build_devel 1
%define build_debug 1
# Build desktop i586 / 1GB
%ifarch %{ix86}
%define build_desktop586 1
%endif
# Build desktop (i686 / 4GB) / x86_64 / sparc64 sets
%define build_desktop 1
# Build server (i686 / 64GB)/x86_64 / sparc64 sets
%define build_server 1
# End of user definitions
%{?_without_desktop586: %global build_desktop586 0}
%{?_without_desktop: %global build_desktop 0}
%{?_without_server: %global build_server 0}
%{?_without_doc: %global build_doc 0}
%{?_without_source: %global build_source 0}
%{?_without_devel: %global build_devel 0}
%{?_without_debug: %global build_debug 0}
%{?_with_desktop586: %global build_desktop586 1}
%{?_with_desktop: %global build_desktop 1}
%{?_with_server: %global build_server 1}
%{?_with_doc: %global build_doc 1}
%{?_with_source: %global build_source 1}
%{?_with_devel: %global build_devel 1}
%{?_with_debug: %global build_debug 1}
# For the .nosrc.rpm
%define build_nosrc 0
%{?_with_nosrc: %global build_nosrc 1}
%if %(if [ -z "$CC" ] ; then echo 0; else echo 1; fi)
%define kmake %make CC="$CC"
%else
%define kmake %make
%endif
# there are places where parallel make don't work
%define smake make
# Parallelize xargs invocations on smp machines
%define kxargs xargs %([ -z "$RPM_BUILD_NCPUS" ] \\\
&& RPM_BUILD_NCPUS="`/usr/bin/getconf _NPROCESSORS_ONLN`"; \\\
[ "$RPM_BUILD_NCPUS" -gt 1 ] && echo "-P $RPM_BUILD_NCPUS")
# Sparc arch wants sparc64 kernels
%define target_arch %(echo %{_arch} | sed -e "s/sparc/sparc64/")
#
# SRC RPM description
#
Summary: Hardened Linux kernel with RSBAC enhancement
Name: %{kname}
Version: %{kversion}
Release: %{rpmrel}
License: GPLv2
Group: System/Kernel and hardware
ExclusiveArch: %{ix86} ppc powerpc x86_64 amd64 sparc sparc64
ExclusiveOS: Linux
Provides: kernel = %{kversion}
URL: http://www.rsbac.org
####################################################################
#
# Sources
#
### This is for full SRC RPM
Source0: ftp://ftp.kernel.org/pub/linux/kernel/v%{kernelversion}.%{patchlevel}/linux-%{tar_ver}.tar.bz2
Source1: ftp://ftp.kernel.org/pub/linux/kernel/v%{kernelversion}.%{patchlevel}/linux-%{tar_ver}.tar.bz2.sign
### This is for stripped SRC RPM
%if %build_nosrc
NoSource: 0
%endif
# This is for disabling *config, mrproper, prepare, scripts on -devel rpms
Source2: disable-mrproper-in-devel-rpms.patch
Source3: disable-prepare-scripts-configs-in-devel-rpms.patch
Source4: README.kernel-sources
Source5: README.MandrivaLinux
Source100: linux-%{patch_ver}.tar.bz2
Source200: kernel-rsbac.config
Source201: http://download.rsbac.org/code/%{rsbacver}/%{kernelversion}/rsbac-common-%{kernelversion}.%{patchlevel}-%{rsbacver}.tar.bz2
Source202: http://download.rsbac.org/code/%{rsbacver}/changes-%{rsbacver}.txt
Source203: http://download.rsbac.org/code/%{rsbacver}/admin-changes-%{rsbacver}.txt
####################################################################
#
# Patches
#
# Patch0 to Patch100 are for core kernel upgrades.
#
# Pre linus patch: ftp://ftp.kernel.org/pub/linux/kernel/v2.6/testing
%if %kpatch
Patch1: ftp://ftp.kernel.org/pub/linux/kernel/v%{kernelversion}.%{patchlevel}/testing/patch-%{kernelversion}.%{patchlevel}.%{sublevel}-%{kpatch}.bz2
Source10: ftp://ftp.kernel.org/pub/linux/kernel/v%{kernelversion}.%{patchlevel}/testing/patch-%{kernelversion}.%{patchlevel}.%{sublevel}-%{kpatch}.bz2.sign
%endif
%if %kgit
Patch2: ftp://ftp.kernel.org/pub/linux/kernel/v%{kernelversion}.%{patchlevel}/snapshots/patch-%{kernelversion}.%{patchlevel}.%{sublevel}-%{kpatch}-git%{kgit}.bz2
Source11: ftp://ftp.kernel.org/pub/linux/kernel/v%{kernelversion}.%{patchlevel}/snapshots/patch-%{kernelversion}.%{patchlevel}.%{sublevel}-%{kpatch}-git%{kgit}.bz2.sign
%endif
%if %kstable
Patch1: ftp://ftp.kernel.org/pub/linux/kernel/v%{kernelversion}.%{patchlevel}/patch-%{kversion}.bz2
Source10: ftp://ftp.kernel.org/pub/linux/kernel/v%{kernelversion}.%{patchlevel}/patch-%{kversion}.bz2.sign
%endif
#END
####################################################################
# Defines for the things that are needed for all the kernels
#
%define common_description_kernel The kernel package contains the Linux kernel (vmlinuz), the core of your \
Mandriva/RSBAC Linux operating system. The kernel handles the basic functions \
of the operating system: memory allocation, process allocation, device \
input and output, etc.
%define common_description_info For instructions for update, see: \
http://www.mandriva.com/en/security/kernelupdate \
This kernel include the RSBAC system. RSBAC is a flexible, powerful and \
fast (low overhead) open source access control framework for Linux kernels \
but this security solution is a very complex system: \
please don't use this kernel by newbie user. \
Please read more information in RSBAC home page: http://www.rsbac.org \
\
%{devel_notice}
### Global Requires/Provides
%define requires1 bootloader-utils >= 1.13-1
%define requires2 mkinitrd >= 4.2.17-31
%define requires3 module-init-tools >= 3.0-7
%define requires4 sysfsutils >= 1.3.0-1
%define requires5 kernel-firmware >= 2.6.27-0.rc2.2mdv
%define kprovides %{kname} = %{kverrel}, kernel = %{tar_ver} ,alsa = 1.0.20, drbd-api = 88
%define kconflicts drakxtools-backend < 10.4.190-2
%define kobsoletes dkms-iwlwifi < 1.2.26
BuildRoot: %{_tmppath}/%{kname}-%{kversion}-%{_arch}-build
Autoreqprov: no
BuildRequires: gcc module-init-tools
%description
%common_description_kernel
%common_description_info
# Virtual kernel rpm to help the installer during the naming transition,
# consider removing it after 2008.0 release
%package -n %{kname}-%{buildrel}
Version: %{fakever}
Release: %{fakerel}
Summary: Virtual rpm for installing the default %{kname}
Group: System/Kernel and hardware
Requires: %{kname}-desktop-%{buildrel}
%description -n %{kname}-%{buildrel}
This package is a virtual rpm that helps the installer to install
the default %{kname} during the transition to the new naming scheme.
%common_description_info
%files -n %{kname}-%{buildrel}
%defattr(-,root,root)
# mkflavour() name flavour processor
# name: the flavour name in the package name
# flavour: first parameter of CreateKernel()
%define mkflavour() \
%package -n %{kname}-%{1}-%{buildrel} \
Version: %{fakever} \
Release: %{fakerel} \
Provides: %kprovides \
Requires(pre): %requires1 %requires2 %requires3 %requires4 \
Requires: %requires5 \
Provides: should-restart = system \
Provides: kernel-%{1} = %{kverrel} \
Suggests: crda \
Obsoletes: %kobsoletes \
Conflicts: %kconflicts \
%ifarch %{ix86} \
Conflicts: arch(x86_64) \
%endif \
Summary: %{expand:%{summary_%(echo %{1})}} \
Group: System/Kernel and hardware \
%description -n %{kname}-%{1}-%{buildrel} \
%common_description_kernel %{expand:%{info_%(echo %{1})}} \
\
%common_description_info \
\
%package -n %{kname}-%{1}-devel-%{buildrel} \
Version: %{fakever} \
Release: %{fakerel} \
Requires: glibc-devel ncurses-devel make gcc perl \
Summary: The kernel-devel files for %{kname}-%{1}-%{buildrel} \
Group: Development/Kernel \
Provides: kernel-devel = %{kverrel} \
Provides: %{kname}-devel = %{kverrel} \
%ifarch %{ix86} \
Conflicts: arch(x86_64) \
%endif \
%description -n %{kname}-%{1}-devel-%{buildrel} \
This package contains the kernel files (headers and build tools) \
that should be enough to build additional drivers for \
use with %{kname}-%{1}-%{buildrel}. \
\
If you want to build your own kernel, you need to install the full \
%{kname}-source-%{buildrel} rpm. \
\
%common_description_info \
\
%package -n %{kname}-%{1}-debug-%{buildrel} \
Version: %{fakever} \
Release: %{fakerel} \
Summary: Files with debug info for %{kname}-%{1}-%{buildrel} \
Group: Development/Debug \
Provides: kernel-debug = %{kverrel} \
Provides: %{kname}-debug = %{kverrel} \
%ifarch %{ix86} \
Conflicts: arch(x86_64) \
%endif \
%description -n %{kname}-%{1}-debug-%{buildrel} \
This package contains the files with debug info to aid in debug tasks \
when using %{kname}-%{1}-%{buildrel}. \
\
If you need to look at debug information or use some application that \
needs debugging info from the kernel, this package may help. \
\
%common_description_info \
\
%package -n %{kname}-%{1}-latest \
Version: %{kversion} \
Release: %{rpmrel} \
Summary: Virtual rpm for latest %{kname}-%{1} \
Group: System/Kernel and hardware \
Requires: %{kname}-%{1}-%{buildrel} \
%ifarch %{ix86} \
Conflicts: arch(x86_64) \
%endif \
%description -n %{kname}-%{1}-latest \
This package is a virtual rpm that aims to make sure you always have the \
latest %{kname}-%{1} installed... \
\
%common_description_info \
\
%package -n %{kname}-%{1}-devel-latest \
Version: %{kversion} \
Release: %{rpmrel} \
Summary: Virtual rpm for latest %{kname}-%{1}-devel \
Group: Development/Kernel \
Requires: %{kname}-%{1}-devel-%{buildrel} \
%ifarch %{ix86} \
Conflicts: arch(x86_64) \
%endif \
Provides: %{kname}-devel-latest \
Provides: kernel-devel-latest \
%description -n %{kname}-%{1}-devel-latest \
This package is a virtual rpm that aims to make sure you always have the \
latest %{kname}-%{1}-devel installed... \
\
%common_description_info \
\
%package -n %{kname}-%{1}-debug-latest \
Version: %{kversion} \
Release: %{rpmrel} \
Summary: Virtual rpm for latest %{kname}-%{1}-debug \
Group: Development/Debug \
Requires: %{kname}-%{1}-debug-%{buildrel} \
%ifarch %{ix86} \
Conflicts: arch(x86_64) \
%endif \
Provides: %{kname}-debug-latest \
Provides: kernel-debug-latest \
%description -n %{kname}-%{1}-debug-latest \
This package is a virtual rpm that aims to make sure you always have the \
latest %{kname}-%{1}-debug installed... \
\
%common_description_info \
\
%post -n %{kname}-%{1}-%{buildrel} -f kernel_files.%{1}-post \
cat << EOF \
Please add to the kernel parameters this options \
to the successful first boot: \
rsbac_softmode rsbac_um_no_excl \
..and please read the Documentation/rsbac/README-kernparam file \
the more information. \
Thank you: Gergely Lónyai \
EOF \
\
%preun -n %{kname}-%{1}-%{buildrel} -f kernel_files.%{1}-preun \
%postun -n %{kname}-%{1}-%{buildrel} -f kernel_files.%{1}-postun \
\
%post -n %{kname}-%{1}-devel-%{buildrel} -f kernel_devel_files.%{1}-post \
%preun -n %{kname}-%{1}-devel-%{buildrel} -f kernel_devel_files.%{1}-preun \
\
%files -n %{kname}-%{1}-%{buildrel} -f kernel_files.%{1} \
%files -n %{kname}-%{1}-latest \
%defattr(-,root,root) \
\
%if %build_devel \
%files -n %{kname}-%{1}-devel-%{buildrel} -f kernel_devel_files.%{1} \
%files -n %{kname}-%{1}-devel-latest \
%defattr(-,root,root) \
%endif \
\
%if %build_debug \
%files -n %{kname}-%{1}-debug-%{buildrel} -f kernel_debug_files.%{1} \
%files -n %{kname}-%{1}-debug-latest \
%defattr(-,root,root) \
%endif
%ifarch %{ix86}
#
# kernel-desktop586: i586, smp-alternatives, 4GB
#
%if %build_desktop586
%define summary_desktop586 Hardened Linux kernel for desktop use with i586 & 4GB RAM RAM and enhanced by RSBAC
%define info_desktop586 This kernel is compiled for desktop use, single or \
multiple i586 processor(s)/core(s) and less than 4GB RAM, using voluntary \
preempt, CFS cpu scheduler and cfq i/o scheduler. \
This kernel relies on in-kernel smp alternatives to switch between up & smp \
mode depending on detected hardware. To force the kernel to boot in single \
processor mode, use the "nosmp" boot parameter.
%mkflavour desktop586
%endif
%endif
#
# kernel-desktop: i686, smp-alternatives, 4 GB / x86_64
#
%if %build_desktop
%ifarch %{ix86}
%define summary_desktop Hardened Linux Kernel for desktop use with i686 & 4GB RAM and enhanced by RSBAC
%define info_desktop This kernel is compiled for desktop use, single or \
multiple i686 processor(s)/core(s) and less than 4GB RAM, using HZ_1000, \
voluntary preempt, CFS cpu scheduler and cfq i/o scheduler. \
This kernel relies on in-kernel smp alternatives to switch between up & smp \
mode depending on detected hardware. To force the kernel to boot in single \
processor mode, use the "nosmp" boot parameter.
%else
%define summary_desktop Hardened Linux Kernel for desktop use with %{_arch} and enhanced by RSBAC
%define info_desktop This kernel is compiled for desktop use, single or \
multiple %{_arch} processor(s)/core(s), using HZ_1000, voluntary preempt, \
CFS cpu scheduler and cfq i/o scheduler. \
This kernel relies on in-kernel smp alternatives to switch between up & smp \
mode depending on detected hardware. To force the kernel to boot in single \
processor mode, use the "nosmp" boot parameter.
%endif
%mkflavour desktop
%endif
#
# kernel-server: i686, smp-alternatives, 64 GB / x86_64
#
%if %build_server
%ifarch %{ix86}
%define summary_server Hardened Linux Kernel for server use with i686 & 64GB RAM and enhanced by RSBAC
%define info_server This kernel is compiled for server use, single or \
multiple i686 processor(s)/core(s) and up to 64GB RAM using PAE, using \
no preempt, HZ_100, CFS cpu scheduler and cfq i/o scheduler. \
This kernel relies on in-kernel smp alternatives to switch between up & smp \
mode depending on detected hardware. To force the kernel to boot in single \
processor mode, use the "nosmp" boot parameter.
%else
%define summary_server Hardened Linux Kernel for server use with %{_arch} and enhanced by RSBAC
%define info_server This kernel is compiled for server use, single or \
multiple %{_arch} processor(s)/core(s), using no preempt, HZ_100, \
CFS cpu scheduler and cfq i/o scheduler. \
This kernel relies on in-kernel smp alternatives to switch between up & smp \
mode depending on detected hardware. To force the kernel to boot in single \
processor mode, use the "nosmp" boot parameter.
%endif
%mkflavour server
%endif
%if %build_source
#
# kernel-source
#
%package -n %{kname}-source-%{buildrel}
Version: %{fakever}
Release: %{fakerel}
Requires: glibc-devel, ncurses-devel, make, gcc, perl
Summary: The Linux source code for %{kname}-%{buildrel}
Group: Development/Kernel
Autoreqprov: no
Provides: kernel-source = %{kverrel}, kernel-devel = %{kverrel}
Provides: %{kname}-source = %{kverrel}, %{kname}-devel = %{kverrel}
%ifarch %{ix86}
Conflicts: arch(x86_64)
%endif
%description -n %{kname}-source-%{buildrel}
The %{kname}-source package contains the source code files for the Manbo
Linux kernel. Theese source files are only needed if you want to build your
own custom kernel that is better tuned to your particular hardware.
If you only want the files needed to build 3rdparty (nVidia, Ati, dkms-*,...)
drivers against, install the *-devel-* rpm that is matching your kernel.
%common_description_info
%post -n %{kname}-source-%{buildrel}
for i in /lib/modules/%{kversion}-{desktop586,desktop,server}-%{buildrpmrel}; do
if [ -d $i ]; then
if [ ! -L $i/build -a ! -L $i/source ]; then
ln -sf /usr/src/linux-%{kversion}-%{buildrpmrel} $i/build
ln -sf /usr/src/linux-%{kversion}-%{buildrpmrel} $i/source
fi
fi
done
cd /usr/src
rm -f linux
ln -snf linux-%{kversion}-%{buildrpmrel} linux
%preun -n %{kname}-source-%{buildrel}
for i in /lib/modules/%{kversion}-{desktop586,desktop,server}-%{buildrpmrel}/{build,source}; do
if [ -L $i ]; then
if [ "$(readlink $i)" = "/usr/src/linux-%{kversion}-%{buildrpmrel}" ]; then
rm -f $i
fi
fi
done
if [ -L /usr/src/linux ]; then
if [ "$(readlink /usr/src/linux)" = "linux-%{kversion}-%{buildrpmrel}" ]; then
rm -f /usr/src/linux
fi
fi
exit 0
#
# kernel-source-latest: virtual rpm
#
%package -n %{kname}-source-latest
Version: %{kversion}
Release: %{rpmrel}
Summary: Virtual rpm for latest %{kname}-source
Group: Development/Kernel
Requires: %{kname}-source-%{buildrel}
Provides: kernel-source-%{buildrel} = %{kversion}
%ifarch %{ix86}
Conflicts: arch(x86_64)
%endif
%description -n %{kname}-source-latest
This package is a virtual rpm that aims to make sure you always have the
latest %{kname}-source installed...
%common_description_info
%endif
%if %build_doc
#
# kernel-doc: documentation for the Linux kernel
#
%package -n %{kname}-doc
Version: %{kversion}
Release: %{rpmrel}
Summary: Various documentation bits found in the %{kname} source
Group: Books/Computer books
Provides: kernel-doc = %{kversion}
%ifarch %{ix86}
Conflicts: arch(x86_64)
%endif
%description -n %{kname}-doc
This package contains documentation files from the %{kname} source.
Various bits of information about the Linux kernel and the device drivers
shipped with it are documented in these files. You also might want install
this package if you need a reference to the options that can be passed to
Linux kernel modules at load time.
%common_description_info
%endif
#
# End packages - here begins build stage
#
%prep
%setup -q -n %top_dir_name -c
#RSBAC
%setup -q -n %top_dir_name/linux-%{tar_ver} -D -T -a201
#
%setup -q -n %top_dir_name -D -T -a100
%define patches_dir ../%{patch_ver}/
cd %src_dir
%if %kpatch
%patch1 -p1
%endif
%if %kgit
%patch2 -p1
%endif
%if %kstable
%patch1 -p1
%endif
#RSBAC
for I in `find %{patches_dir}/configs/ -type f` ; do
sed 's/^.*CONFIG_CRYPTO_SHA1=.*$/CONFIG_CRYPTO_SHA1=y/' -i ${I}
cat %{SOURCE200} >> ${I}
done
cat %{SOURCE200} >> .config
sed 's/^.*CONFIG_CRYPTO_SHA1=.*$/CONFIG_CRYPTO_SHA1=y/' -i .config
cat %{SOURCE202} > Documentation/rsbac/changes-%{rsbacver}.txt
cat %{SOURCE203} > Documentation/rsbac/admin-changes-%{rsbacver}.txt
#
%{patches_dir}/scripts/apply_patches
# PATCH END
#
# Setup Begin
#
# Prepare all the variables for calling create_configs
%if %build_debug
%define debug --debug
%else
%define debug --no-debug
%endif
%{patches_dir}/scripts/create_configs %debug --user_cpu="%{target_arch}"
# make sure the kernel has the sublevel we know it has...
LC_ALL=C perl -p -i -e "s/^SUBLEVEL.*/SUBLEVEL = %{sublevel}/" Makefile
# get rid of unwanted files
find . -name '*~' -o -name '*.orig' -o -name '*.append' | %kxargs rm -f
%build
# Common target directories
%define _kerneldir /usr/src/linux-%{kversion}-%{buildrpmrel}
%define _bootdir /boot
%define _modulesdir /lib/modules
%define _efidir %{_bootdir}/efi/mandriva
# Directories definition needed for building
%define temp_root %{build_dir}/temp-root
%define temp_source %{temp_root}%{_kerneldir}
%define temp_boot %{temp_root}%{_bootdir}
%define temp_modules %{temp_root}%{_modulesdir}
PrepareKernel() {
name=$1
extension=$2
x86_dir=arch/x86/configs
echo "Make config for kernel $extension"
%smake -s mrproper
if [ "%{target_arch}" == "i386" -o "%{target_arch}" == "x86_64" ]; then
if [ -z "$name" ]; then
cp ${x86_dir}/%{target_arch}_defconfig-desktop .config
else
cp ${x86_dir}/%{target_arch}_defconfig-$name .config
fi
else
if [ -z "$name" ]; then
cp arch/%{target_arch}/defconfig-desktop .config
else
cp arch/%{target_arch}/defconfig-$name .config
fi
fi
# make sure EXTRAVERSION says what we want it to say
%if %kstable
LC_ALL=C perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = .%{kstable}-$extension/" Makefile
%else
LC_ALL=C perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -$extension/" Makefile
%endif
%smake oldconfig
}
BuildKernel() {
KernelVer=$1
echo "Building kernel $KernelVer"
%kmake all
# Start installing stuff
install -d %{temp_boot}
install -m 644 System.map %{temp_boot}/System.map-$KernelVer
install -m 644 .config %{temp_boot}/config-$KernelVer
gzip -c Module.symvers > %{temp_boot}/symvers-$KernelVer.gz
%ifarch ppc powerpc
cp -f vmlinux %{temp_boot}/vmlinuz-$KernelVer
%ifarch ppc
cp -f arch/ppc/boot/images/zImage.chrp-rs6k %{temp_boot}/vmlinuz-rs6k-$KernelVer
%endif
%else
%ifarch sparc sparc64
gzip -9c vmlinux > %{temp_boot}/vmlinuz-$KernelVer
%else
cp -f arch/%{target_arch}/boot/bzImage %{temp_boot}/vmlinuz-$KernelVer
%endif
%endif
# modules
install -d %{temp_modules}/$KernelVer
%smake INSTALL_MOD_PATH=%{temp_root} KERNELRELEASE=$KernelVer modules_install
# remove /lib/firmware, we use a separate kernel-firmware
rm -rf %{temp_root}/lib/firmware
}
SaveDevel() {
devel_flavour=$1
DevelRoot=/usr/src/linux-%{kversion}-$devel_flavour-%{buildrpmrel}
TempDevelRoot=%{temp_root}$DevelRoot
mkdir -p $TempDevelRoot
for i in $(find . -name 'Makefile*'); do cp -R --parents $i $TempDevelRoot;done
for i in $(find . -name 'Kconfig*' -o -name 'Kbuild*'); do cp -R --parents $i $TempDevelRoot;done
cp -fR include $TempDevelRoot
cp -fR scripts $TempDevelRoot
cp -fR kernel/bounds.c $TempDevelRoot/kernel
%ifarch %{ix86} x86_64
cp -fR arch/x86/kernel/asm-offsets.{c,s} $TempDevelRoot/arch/x86/kernel/
cp -fR arch/x86/kernel/asm-offsets_{32,64}.c $TempDevelRoot/arch/x86/kernel/
cp -fR arch/x86/include $TempDevelRoot/arch/x86/
%else
cp -fR arch/%{target_arch}/kernel/asm-offsets.{c,s} $TempDevelRoot/arch/%{target_arch}/kernel/
cp -fR arch/%{target_arch}/include $TempDevelRoot/arch/%{target_arch}/
%endif
cp -fR .config Module.symvers $TempDevelRoot
# cp -fR 3rdparty/mkbuild.pl $TempDevelRoot/3rdparty
# Needed for truecrypt build (Danny)
cp -fR drivers/md/dm.h $TempDevelRoot/drivers/md/
# Needed for lguest
cp -fR drivers/lguest/lg.h $TempDevelRoot/drivers/lguest/
# Needed for lirc_gpio (#39004)
cp -fR drivers/media/video/bt8xx/bttv{,p}.h $TempDevelRoot/drivers/media/video/bt8xx/
# Needed for external dvb tree (#41418)
cp -fR drivers/media/dvb/dvb-core/*.h $TempDevelRoot/drivers/media/dvb/dvb-core/
cp -fR drivers/media/dvb/frontends/lgdt330x.h $TempDevelRoot/drivers/media/dvb/frontends/
# http://lists.mandriva.com/cooker/2009-05/msg00534.php
cp -fR drivers/ieee1394/*.h $TempDevelRoot/drivers/ieee1394/
# add acpica header files, needed for fglrx build
cp -fR drivers/acpi/acpica/*.h $TempDevelRoot/drivers/acpi/acpica/
for i in alpha arm avr32 blackfin cris frv h8300 ia64 m32r m68knommu \
microblaze mips mn10300 parisc s390 sh xtensa; do
rm -rf $TempDevelRoot/arch/$i
rm -rf $TempDevelRoot/include/asm-$i
done
# ppc needs only m68k headers
rm -rf $TempDevelRoot/arch/m68k
%ifnarch ppc powerpc
rm -rf $TempDevelRoot/arch/powerpc
rm -rf $TempDevelRoot/include/asm-m68k
%endif
%ifnarch sparc sparc64
rm -rf $TempDevelRoot/arch/sparc
rm -rf $TempDevelRoot/arch/sparc64
%endif
%ifnarch %{ix86} x86_64
rm -rf $TempDevelRoot/arch/x86
rm -rf $TempDevelRoot/include/asm-x86
%endif
# Clean the scripts tree, and make sure everything is ok (sanity check)
# running prepare+scripts (tree was already "prepared" in build)
pushd $TempDevelRoot >/dev/null
%smake -s prepare scripts
%smake -s clean
popd >/dev/null
rm -f $TempDevelRoot/.config.old
# fix permissions
chmod -R a+rX $TempDevelRoot
# disable mrproper in -devel rpms
patch -p1 --fuzz=0 -d $TempDevelRoot -i %{SOURCE2}
patch -p1 --fuzz=0 -d $TempDevelRoot -i %{SOURCE3}
kernel_devel_files=../kernel_devel_files.$devel_flavour
### Create the kernel_devel_files.*
cat > $kernel_devel_files <<EOF
%defattr(-,root,root)
%dir $DevelRoot
%dir $DevelRoot/arch
%dir $DevelRoot/include
#$DevelRoot/3rdparty
$DevelRoot/Documentation
%ifarch ppc powerpc
$DevelRoot/arch/powerpc
$DevelRoot/arch/ppc
%endif
%ifarch sparc sparc64
$DevelRoot/arch/sparc
$DevelRoot/arch/sparc64
%endif
$DevelRoot/arch/um
%ifarch %{ix86} x86_64
$DevelRoot/arch/x86
%endif
$DevelRoot/block
$DevelRoot/crypto
$DevelRoot/drivers
$DevelRoot/firmware
$DevelRoot/fs
$DevelRoot/include/Kbuild
$DevelRoot/include/acpi
$DevelRoot/include/asm
$DevelRoot/include/asm-generic
%ifarch powerpc ppc
$DevelRoot/include/asm-m68k
$DevelRoot/include/asm-powerpc
$DevelRoot/include/asm-ppc
%endif
%ifarch sparc sparc64
$DevelRoot/include/asm-sparc
$DevelRoot/include/asm-sparc64
%endif
%ifarch %{ix86} x86_64
$DevelRoot/include/asm-x86
%endif
$DevelRoot/include/config
$DevelRoot/include/crypto
$DevelRoot/include/drm
$DevelRoot/include/keys
$DevelRoot/include/linux
$DevelRoot/include/math-emu
$DevelRoot/include/media
$DevelRoot/include/mtd
$DevelRoot/include/net
$DevelRoot/include/pcmcia
$DevelRoot/include/rdma
$DevelRoot/include/rsbac
$DevelRoot/include/rxrpc
$DevelRoot/include/scsi
$DevelRoot/include/sound
$DevelRoot/include/trace
$DevelRoot/include/video
$DevelRoot/include/xen
$DevelRoot/init
$DevelRoot/ipc
$DevelRoot/kernel
$DevelRoot/lib
$DevelRoot/mm
$DevelRoot/net
$DevelRoot/rsbac
$DevelRoot/samples
$DevelRoot/scripts
$DevelRoot/security
$DevelRoot/sound
$DevelRoot/tools
$DevelRoot/usr
$DevelRoot/.config
$DevelRoot/Kbuild
$DevelRoot/Makefile
$DevelRoot/Module.symvers
$DevelRoot/arch/Kconfig
%doc README.MandrivaLinux
%doc README.kernel-sources
EOF
### Create -devel Post script on the fly
cat > $kernel_devel_files-post <<EOF
if [ -d /lib/modules/%{kversion}-$devel_flavour-%{buildrpmrel} ]; then
rm -f /lib/modules/%{kversion}-$devel_flavour-%{buildrpmrel}/{build,source}
ln -sf $DevelRoot /lib/modules/%{kversion}-$devel_flavour-%{buildrpmrel}/build
ln -sf $DevelRoot /lib/modules/%{kversion}-$devel_flavour-%{buildrpmrel}/source
fi
EOF
### Create -devel Preun script on the fly
cat > $kernel_devel_files-preun <<EOF
if [ -L /lib/modules/%{kversion}-$devel_flavour-%{buildrpmrel}/build ]; then
rm -f /lib/modules/%{kversion}-$devel_flavour-%{buildrpmrel}/build
fi
if [ -L /lib/modules/%{kversion}-$devel_flavour-%{buildrpmrel}/source ]; then
rm -f /lib/modules/%{kversion}-$devel_flavour-%{buildrpmrel}/source
fi
exit 0
EOF
}
SaveDebug() {
debug_flavour=$1
install -m 644 vmlinux \
%{temp_boot}/vmlinux-%{kversion}-$debug_flavour-%{buildrpmrel}
kernel_debug_files=../kernel_debug_files.$debug_flavour
echo "%defattr(-,root,root)" > $kernel_debug_files
echo "%{_bootdir}/vmlinux-%{kversion}-$debug_flavour-%{buildrpmrel}" \
>> $kernel_debug_files
find %{temp_modules}/%{kversion}-$debug_flavour-%{buildrpmrel}/kernel \
-name "*.ko" | \
%kxargs -I '{}' objcopy --only-keep-debug '{}' '{}'.debug
find %{temp_modules}/%{kversion}-$debug_flavour-%{buildrpmrel}/kernel \
-name "*.ko" | %kxargs -I '{}' \
sh -c 'cd `dirname {}`; \
objcopy --add-gnu-debuglink=`basename {}`.debug \
--strip-debug `basename {}`'
pushd %{temp_modules}
find %{kversion}-$debug_flavour-%{buildrpmrel}/kernel \
-name "*.ko.debug" > debug_module_list
popd
cat %{temp_modules}/debug_module_list | \
sed 's|\(.*\)|%{_modulesdir}/\1|' >> $kernel_debug_files
cat %{temp_modules}/debug_module_list | \
sed 's|\(.*\)|%exclude %{_modulesdir}/\1|' \
>> ../kernel_exclude_debug_files.$debug_flavour
rm -f %{temp_modules}/debug_module_list
}
CreateFiles() {
kernel_flavour=$1
kernel_files=../kernel_files.$kernel_flavour
### Create the kernel_files.*
cat > $kernel_files <<EOF
%defattr(-,root,root)
%{_bootdir}/System.map-%{kversion}-$kernel_flavour-%{buildrpmrel}
%{_bootdir}/symvers-%{kversion}-$kernel_flavour-%{buildrpmrel}.gz
%{_bootdir}/config-%{kversion}-$kernel_flavour-%{buildrpmrel}
%{_bootdir}/vmlinuz-%{kversion}-$kernel_flavour-%{buildrpmrel}
%dir %{_modulesdir}/%{kversion}-$kernel_flavour-%{buildrpmrel}/
%{_modulesdir}/%{kversion}-$kernel_flavour-%{buildrpmrel}/kernel
%{_modulesdir}/%{kversion}-$kernel_flavour-%{buildrpmrel}/modules.*
%doc README.MandrivaLinux
%doc README.kernel-sources
EOF
%if %build_debug
cat ../kernel_exclude_debug_files.$kernel_flavour >> $kernel_files
%endif
### Create kernel Post script
cat > $kernel_files-post <<EOF
/sbin/installkernel %{kversion}-$kernel_flavour-%{buildrpmrel}
pushd /boot > /dev/null
if [ -L vmlinuz-$kernel_flavour ]; then
rm -f vmlinuz-$kernel_flavour
fi
ln -sf vmlinuz-%{kversion}-$kernel_flavour-%{buildrpmrel} vmlinuz-$kernel_flavour
if [ -L initrd-$kernel_flavour.img ]; then
rm -f initrd-$kernel_flavour.img
fi
ln -sf initrd-%{kversion}-$kernel_flavour-%{buildrpmrel}.img initrd-$kernel_flavour.img
popd > /dev/null
%if %build_devel
# create kernel-devel symlinks if matching -devel- rpm is installed
if [ -d /usr/src/linux-%{kversion}-$kernel_flavour-%{buildrpmrel} ]; then
rm -f /lib/modules/%{kversion}-$kernel_flavour-%{buildrpmrel}/{build,source}
ln -sf /usr/src/linux-%{kversion}-$kernel_flavour-%{buildrpmrel} /lib/modules/%{kversion}-$kernel_flavour-%{buildrpmrel}/build
ln -sf /usr/src/linux-%{kversion}-$kernel_flavour-%{buildrpmrel} /lib/modules/%{kversion}-$kernel_flavour-%{buildrpmrel}/source
fi
%endif
%if %build_source
# create kernel-source symlinks only if matching -devel- rpm is not installed
if [ -d /usr/src/linux-%{kversion}-%{buildrpmrel} -a ! -d /usr/src/linux-%{kversion}-$kernel_flavour-%{buildrpmrel} ]; then
rm -f /lib/modules/%{kversion}-$kernel_flavour-%{buildrpmrel}/{build,source}
ln -sf /usr/src/linux-%{kversion}-%{buildrpmrel} /lib/modules/%{kversion}-$kernel_flavour-%{buildrpmrel}/build
ln -sf /usr/src/linux-%{kversion}-%{buildrpmrel} /lib/modules/%{kversion}-$kernel_flavour-%{buildrpmrel}/source
fi
%endif
EOF
### Create kernel Preun script on the fly
cat > $kernel_files-preun <<EOF
/sbin/installkernel -R %{kversion}-$kernel_flavour-%{buildrpmrel}
pushd /boot > /dev/null
if [ -L vmlinuz-$kernel_flavour ]; then
if [ "$(readlink vmlinuz-$kernel_flavour)" = "vmlinuz-%{kversion}-$kernel_flavour-%{buildrpmrel}" ]; then
rm -f vmlinuz-$kernel_flavour
fi
fi
if [ -L initrd-$kernel_flavour.img ]; then
if [ "$(readlink initrd-$kernel_flavour.img)" = "initrd-%{kversion}-$kernel_flavour-%{buildrpmrel}.img" ]; then
rm -f initrd-$kernel_flavour.img
fi
fi
popd > /dev/null
%if %build_devel
if [ -L /lib/modules/%{kversion}-$kernel_flavour-%{buildrpmrel}/build ]; then
rm -f /lib/modules/%{kversion}-$kernel_flavour-%{buildrpmrel}/build
fi
if [ -L /lib/modules/%{kversion}-$kernel_flavour-%{buildrpmrel}/source ]; then
rm -f /lib/modules/%{kversion}-$kernel_flavour-%{buildrpmrel}/source
fi
%endif
exit 0
EOF
### Create kernel Postun script on the fly
cat > $kernel_files-postun <<EOF
/sbin/kernel_remove_initrd %{kversion}-$kernel_flavour-%{buildrpmrel}
EOF
}
CreateKernel() {
flavour=$1
PrepareKernel $flavour $flavour-%{buildrpmrel}
BuildKernel %{kversion}-$flavour-%{buildrpmrel}
%if %build_devel
SaveDevel $flavour
%endif
%if %build_debug
SaveDebug $flavour
%endif
CreateFiles $flavour
}
###
# DO it...
###
# Create a simulacro of buildroot
rm -rf %{temp_root}
install -d %{temp_root}
#make sure we are in the directory
cd %src_dir
%ifarch %{ix86}
%if %build_desktop586
CreateKernel desktop586
%endif
%endif
%if %build_desktop
CreateKernel desktop
%endif
%if %build_server
CreateKernel server
%endif
# We don't make to repeat the depend code at the install phase
%if %build_source
PrepareKernel "" %{buildrpmrel}custom
%smake -s mrproper
%endif
###
### install
###
%install
install -m 644 %{SOURCE4} .
install -m 644 %{SOURCE5} .
cd %src_dir
# Directories definition needed for installing
%define target_source %{buildroot}%{_kerneldir}
%define target_boot %{buildroot}%{_bootdir}
%define target_modules %{buildroot}%{_modulesdir}
# We want to be able to test several times the install part
rm -rf %{buildroot}
cp -a %{temp_root} %{buildroot}
# Create directories infastructure
%if %build_source
install -d %{target_source}
tar cf - . | tar xf - -C %{target_source}
chmod -R a+rX %{target_source}
# we remove all the source files that we don't ship
# first architecture files
for i in alpha arm arm26 avr32 blackfin cris frv h8300 ia64 m32r m68knommu \
microblaze mips parisc s390 sh sh64 v850 xtensa mn10300; do
rm -rf %{target_source}/arch/$i
rm -rf %{target_source}/include/asm-$i
done
# ppc needs only m68k headers
rm -rf %{target_source}/arch/m68k
%ifnarch ppc powerpc
rm -rf %{target_source}/arch/ppc
rm -rf %{target_source}/arch/powerpc
rm -rf %{target_source}/include/asm-m68k
rm -rf %{target_source}/include/asm-ppc
rm -rf %{target_source}/include/asm-powerpc
%endif
%ifnarch sparc sparc64
rm -rf %{target_source}/arch/sparc
rm -rf %{target_source}/arch/sparc64
rm -rf %{target_source}/include/asm-sparc
rm -rf %{target_source}/include/asm-sparc64
%endif
%ifnarch %{ix86} x86_64
rm -rf %{target_source}/arch/x86
rm -rf %{target_source}/include/asm-x86
%endif
# other misc files
rm -f %{target_source}/{.config.old,.config.cmd,.gitignore,.lst,.mailmap}
rm -f %{target_source}/{.missing-syscalls.d,arch/.gitignore,firmware/.gitignore}
#endif %build_source
%endif
# gzipping modules
find %{target_modules} -name "*.ko" | %kxargs gzip -9
# We used to have a copy of PrepareKernel here
# Now, we make sure that the thing in the linux dir is what we want it to be
for i in %{target_modules}/*; do
rm -f $i/build $i/source
done
# sniff, if we gzipped all the modules, we change the stamp :(
# we really need the depmod -ae here
pushd %{target_modules}
for i in *; do
/sbin/depmod -u -ae -b %{buildroot} -r -F %{target_boot}/System.map-$i $i
echo $?
done
for i in *; do
pushd $i
echo "Creating module.description for $i"
modules=`find . -name "*.ko.gz"`
echo $modules | %kxargs /sbin/modinfo \
| perl -lne 'print "$name\t$1" if $name && /^description:\s*(.*)/; $name = $1 if m!^filename:\s*(.*)\.k?o!; $name =~ s!.*/!!' > modules.description
popd
done
popd
###
### clean
###
%clean
rm -rf %{buildroot}
# We don't want to remove this, the whole reason of its existence is to be
# able to do several rpm --short-circuit -bi for testing install
# phase without repeating compilation phase
#rm -rf %{temp_root}
###
### source and doc file lists
###
%if %build_source
%files -n %{kname}-source-%{buildrel}
%defattr(-,root,root)
%dir %{_kerneldir}
%dir %{_kerneldir}/arch
%dir %{_kerneldir}/include
#%{_kerneldir}/3rdparty
%{_kerneldir}/Documentation
%{_kerneldir}/arch/Kconfig
%ifarch powerpc ppc
%{_kerneldir}/arch/powerpc
%{_kerneldir}/arch/ppc
%endif
%ifarch sparc sparc64
%{_kerneldir}/arch/sparc
%{_kerneldir}/arch/sparc64
%endif
%{_kerneldir}/arch/um
%ifarch %{ix86} x86_64
%{_kerneldir}/arch/x86
%endif
%{_kerneldir}/block
%{_kerneldir}/crypto
%{_kerneldir}/drivers
%{_kerneldir}/firmware
%{_kerneldir}/fs
%{_kerneldir}/include/Kbuild
%{_kerneldir}/include/acpi
%{_kerneldir}/include/asm-generic
%ifarch powerpc ppc
%{_kerneldir}/include/m68k
%{_kerneldir}/include/powerpc
%{_kerneldir}/include/ppc
%endif
%ifarch sparc sparc64
%{_kerneldir}/include/asm-sparc
%{_kerneldir}/include/asm-sparc64
%endif
%ifarch %{ix86} x86_64
%{_kerneldir}/include/asm-x86
%endif
%{_kerneldir}/include/crypto
%{_kerneldir}/include/drm
%{_kerneldir}/include/keys
%{_kerneldir}/include/linux
%{_kerneldir}/include/math-emu
%{_kerneldir}/include/media
%{_kerneldir}/include/mtd
%{_kerneldir}/include/net
%{_kerneldir}/include/pcmcia
%{_kerneldir}/include/rdma
%{_kerneldir}/include/rsbac
%{_kerneldir}/include/rxrpc
%{_kerneldir}/include/scsi
%{_kerneldir}/include/sound
%{_kerneldir}/include/trace
%{_kerneldir}/include/video
%{_kerneldir}/include/xen
%{_kerneldir}/init
%{_kerneldir}/ipc
%{_kerneldir}/kernel
%{_kerneldir}/lib
%{_kerneldir}/mm
%{_kerneldir}/net
%{_kerneldir}/rsbac
%{_kerneldir}/virt
%{_kerneldir}/samples
%{_kerneldir}/scripts
%{_kerneldir}/security
%{_kerneldir}/sound
%{_kerneldir}/tools
%{_kerneldir}/usr
%{_kerneldir}/COPYING
%{_kerneldir}/CREDITS
%{_kerneldir}/Kbuild
%{_kerneldir}/MAINTAINERS
%{_kerneldir}/Makefile
%{_kerneldir}/README
%{_kerneldir}/REPORTING-BUGS
%doc README.MandrivaLinux
%doc README.kernel-sources
#endif build_source
%files -n %{kname}-source-latest
%defattr(-,root,root)
%endif
%if %build_doc
%files -n %{kname}-doc
%defattr(-,root,root)
%doc linux-%{tar_ver}/Documentation/*
%endif
%changelog
* Thu Sep 17 2009 Lonyai Gergely <aleph@mandriva.org> 2.6.31-2mdv2010.0
+ Revision: 443899
- fix %%{_kerneldir}/tools packaging
- update the rsbac code
- The RSBAC developers provide a 2.6.31 patch to Mandriva Linux 2010.0 release.
I modify the SPEC to yours files.
- 2.6.31
- 2.6.30.6
* Fri Sep 04 2009 Lonyai Gergely <aleph@mandriva.org> 2.6.30.5-6mdv2010.0
+ Revision: 430326
- rebuild
- rebuild
- rsbac verzion update to svn-781
- rebuild
+ Thomas Backlund <tmb@mandriva.org>
- bump release
- nuke all obsoletes/provides that conflicts with main kernel
(they dont belong in kernel-rsbac anyway)
* Tue Aug 25 2009 Lonyai Gergely <aleph@mandriva.org> 2.6.30.5-3mdv2010.0
+ Revision: 420846
- rebuild
- fix "without" contitions
- rebuild
- update to 2.6.30.5
- update kernel-rsbac patches
* Fri Aug 07 2009 Lonyai Gergely <aleph@mandriva.org> 2.6.30.4-3mdv2010.0
+ Revision: 411131
- rebuild
- Add Makefile
- move the rsbac patch to PATCHES dir
- The rsbac patch
- Add rsbac patch
- fix distsuffix
- initial release
- Kernel version: 2.6.30.4
- RSBAC patch version: 1.4.2 (svn: 779)
- not include other patch (exclude compiling helper diffs)
- create kernel-rsbac
+ Thierry Vignaud <tvignaud@mandriva.com>
- typo fix
