2008-02-18 Russell Bryant <russell@digium.com>
* Zaptel 1.4.9 released
2008-02-16 20:15 +0000 [r3835-3840] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* build_tools/test_kernel_git: Add an options 'versions' to list
available kernel revisions (tags).
* README, /: * Start documenting module parameters in the README. *
Update the hardware supported by xpp. Merged revisions 3837 via
svnmerge from http://svn.digium.com/svn/zaptel/branches/1.2
* Makefile: Cut a few more lines from the Makefile.
* Makefile: README.Astribank has moved. Fix docuemtnation
generation.
* kernel/zaptel-base.c: Make the kerenl parameters of zaptel.ko
world-readable.
2008-02-16 04:42 +0000 [r3834] Jeff Peeler <jpeeler@digium.com>
* /: marking 3833 as not applying to 1.4
2008-02-15 21:38 +0000 [r3832] Kevin P. Fleming <kpfleming@digium.com>
* README, /: Merged revisions 3831 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r3831
| kpfleming | 2008-02-15 14:23:27 -0600 (Fri, 15 Feb 2008) | 2
lines update README to reflect currently supported Digium
interface cards ........
2008-02-13 21:18 +0000 [r3830] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* Makefile: No explicit list of modules to install for 2.6 -it's
Kbuild's job. This closes issue #9948 .
2008-02-13 00:34 +0000 [r3823] Kevin P. Fleming <kpfleming@digium.com>
* kernel/wctc4xxp/Kbuild, kernel/wctc4xxp/base.c: remove some
STANDALONE_ZAPATA stuff that is not needed
2008-02-09 11:40 +0000 [r3820-3821] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* Makefile: Don't automatically export all variables.
* Makefile: Remove some unused kernel 2.4 code from the Makefile.
2008-02-07 02:23 +0000 [r3814] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* fxstest.c: fxstest.c should include wctdm.h from kernel/ .
2008-02-05 23:48 +0000 [r3805] sruffell <sruffell@localhost>:
* kernel/wcte12xp/base.c: Changes to the wcte12xp driver. - replace
change to allow driver to recover from descriptor unavailable. -
module echo cancellation parameters now valid under 2.6 kernels.
2008-02-05 19:26 +0000 [r3793-3802] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* Makefile: Make sure version.h is created before building modules.
Closes issue #11924.
* wcusb.h (removed), kb1ec.h (removed), kernel/datamods,
kernel/arith.h, ztcfg-dude.c, kernel/xpp/utils/zt_registration,
kernel/xpp/init_card_3_29, kernel/xpp/firmwares/README,
ztdynamic.c (removed), kernel/xpp/utils/astribank_hook,
kernel/xpp/utils/zconf/Zaptel/Xpp.pm, tonezone.h, hdlctest.c,
kernel/xpp/utils/hexfile.c, wcte11xp.c (removed),
kernel/fasthdlc.h, kernel/wcte12xp/wcte12xp.h, proslic.h
(removed), kernel/xpp/utils/hexfile.h, kernel/wct4xxp,
kernel/wcte12xp/GpakErrs.h, kernel/torisa.c, configure.ac,
pattest.c, kernel/zconfig.h, kernel/tor2-hw.h, jpah.h (removed),
kernel/biquad.h, kernel/xpp/param_doc, kernel/ztd-loc.c,
kernel/xpp/utils/xpp_blink, kernel/xpp/card_bri.c, torisatool.c,
kernel/xpp/utils/test_parse.c, zttranscode.c (removed),
kernel/xpp/init_card_6_29, kernel/xpp/card_bri.h, mg2ec.h
(removed), wctc4xxp (removed), hdlcgen.c,
kernel/datamods/Makefile, kernel/xpp/.version,
kernel/xpp/card_pri.c, kernel/xpp/firmwares/FPGA_1141.hex,
kernel/xpp/xframe_queue.c, ztcfg.c, wct1xxp.c (removed),
kernel/xpp/card_pri.h, kernel/xpp/xframe_queue.h, fir.h
(removed), kernel/xpp/zap_debug.c, digits.h (removed), pciradio.c
(removed), kernel/xpp/utils/zconf/Zaptel/Hardware.pm,
kernel/xpp/zap_debug.h, wcte12xp (removed),
kernel/xpp/utils/zconf/Zaptel/Xpp/Line.pm, hpec (removed), kernel
(added), hdlcverify.c, kernel/xpp/firmwares/LICENSE.firmware,
kernel/wcusb.c, kernel/xpp/init_card_9_29,
kernel/xpp/utils/xpp_modprobe, zaptel.h (removed),
kernel/xpp/utils/genzaptelconf, kernel/xpp/xpp_usb.c,
kernel/wcusb.h, makefw.c (removed), kernel/kb1ec.h,
kernel/xpp/utils/xpp_fxloader.usermap,
kernel/wcte12xp/vpmadt032.c, hdlcstress.c,
kernel/xpp/utils/zconf/Zaptel/Hardware, kernel/hpec/hpec_user.h,
kernel/ztdynamic.c, kernel/wcte12xp/vpmadt032.h,
kernel/xpp/utils/zconf/Zaptel,
kernel/xpp/utils/example_default_zaptel, kernel/wcte12xp/Kbuild,
Kbuild (removed), kernel/wct4xxp/Kbuild, zttool.c,
kernel/xpp/utils/zconf/Zaptel/Xpp, adt_lec.c (removed), ecdis.h
(removed), kernel/wctdm24xxp/GpakHpi.h, kernel/wcte11xp.c,
kernel/wctc4xxp/Kbuild, kernel/xpp/utils/zconf/Zaptel.pm,
kernel/xpp/init_card_4_29, kernel/proslic.h, kb1ec_const.h
(removed), adt_lec.h (removed), wctdm24xxp (removed),
kernel/xpp/utils/lszaptel, kernel/xpp/utils/xpp.rules,
kernel/jpah.h, kernel/datamods/syncppp.c, ztdummy.c (removed),
ztdummy.h (removed), sec-2.h (removed), ztd-eth.c (removed),
sec.h (removed), tormenta2.rbt (removed), kernel/zttranscode.c,
kernel/xpp/Kbuild, kernel/xpp/README.Astribank,
kernel/xpp/card_global.c, kernel/mg2ec.h,
kernel/datamods/hdlc_generic.c, kernel/xpp/utils/Makefile,
kernel/wctc4xxp, kernel/xpp/Makefile, kernel/xpp/parport_debug.c,
kernel/xpp/utils/zconf/Zaptel/Hardware/USB.pm,
kernel/wcte12xp/GpakHpi.h, kernel/xpp/card_global.h,
kernel/wct4xxp/wct4xxp.h, kernel/xpp/utils/fpga_load.8,
kernel/xpp/parport_debug.h, kernel/wct1xxp.c, configure,
fxstest.c, kernel/hpec/hpec_zaptel.h, kernel/xpp/init_card_7_29,
kernel/xpp/utils/zaptel_drivers, kernel/xpp/xpp_log.h,
kernel/fir.h, kernel/wcte12xp/base.c, kernel/digits.h,
kernel/xpp/xpp_zap.c, mg2ec_const.h (removed), kernel/pciradio.c,
kernel/xpp/utils/print_modes.c, kernel/wct4xxp/base.c,
kernel/wcte12xp, kernel/datamods/hdlc_fr.c, kernel/xpp/xpp_zap.h,
kernel/wctc4xxp/base.c, kernel/hpec, wctdm.c (removed),
timertest.c, wctdm.h (removed), kernel/xpp/Changelog_xpp,
kernel/zaptel.h, kernel/xpp/firmwares/FPGA_FXS.hex, tor2.c
(removed), wcfxo.c (removed), xpp (removed), kernel/xpp/xpd.h,
kernel/xpp/calibrate_slics, kernel/makefw.c, Makefile,
kernel/wctdm24xxp/Kbuild, kernel/xpp/xbus-core.c, pciradio.rbt
(removed), kernel/wctc4xxp/Makefile,
kernel/xpp/utils/xpp_fxloader,
kernel/xpp/utils/zconf/Zaptel/Xpp/Xpd.pm,
kernel/xpp/utils/fpga_load.c, kernel/xpp/xbus-core.h,
kernel/xpp/xdefs.h, zaptel-base.c (removed), kernel/Kbuild,
kernel/adt_lec.c, datamods (removed),
kernel/xpp/utils/genzaptelconf.8, arith.h (removed),
kernel/ecdis.h, kernel/xpp/firmwares/USB_FW.hex,
kernel/xpp/xbus-sysfs.c, kernel/wctdm24xxp/gpakenum.h,
kernel/adt_lec.h, kernel/kb1ec_const.h, ztdiag.c,
kernel/wctdm24xxp, kernel/wct4xxp/wct4xxp-diag.c,
kernel/wctdm24xxp/GpakCust.c, kernel/xpp/utils/zconf,
kernel/xpp/xbus-pcm.c, kernel/GNUmakefile,
kernel/xpp/utils/zconf/Zaptel/Xpp/Xbus.pm, kernel/ztdummy.c,
kernel/wctdm24xxp/GpakCust.h, kernel/xpp/xbus-pcm.h,
kernel/wctdm24xxp/wctdm24xxp.h, fasthdlc.h (removed),
kernel/sec-2.h, kernel/ztdummy.h, kernel/sec.h,
kernel/xpp/utils/zconf/Zaptel/Utils.pm, kernel/ztd-eth.c,
kernel/tormenta2.rbt, kernel/xpp/utils/zconf/Zaptel/Span.pm,
wct4xxp (removed), torisa.c (removed), zconfig.h (removed),
kernel/xpp/firmwares, kernel/datamods/hdlc_ppp.c,
kernel/datamods/hdlc_cisco.c, tor2-hw.h (removed),
kernel/wct4xxp/vpm450m.c, biquad.h (removed),
kernel/xpp/utils/zconf/Zaptel/Config/Defaults.pm,
kernel/xpp/firmwares/FPGA_1151.hex, ztd-loc.c (removed),
kernel/wctdm24xxp/base.c, kernel/wct4xxp/vpm450m.h,
kernel/wctdm24xxp/GpakApi.c, kernel/wctc4xxp/codec_test.c,
kernel/xpp/xproto.c, kernel/hpec/hpec.h,
kernel/wctdm24xxp/GpakApi.h, kernel/xpp/xproto.h,
kernel/mg2ec_const.h, fxotune.c, kernel/wcte12xp/Makefile,
kernel/xpp/utils/zconf/Zaptel/Config,
kernel/xpp/utils/zconf/Zaptel/Chans.pm, kernel/wct4xxp/Makefile,
fxotune.h, kernel/wctdm.c, kernel/datamods/hdlc_raw_eth.c,
kernel/datamods/hdlc_raw.c, kernel/wctdm24xxp/Makefile, ztscan.c,
kernel/wctdm.h, ztmonitor.c, kernel/xpp, kernel/tor2.c,
kernel/wcfxo.c, kernel/xpp/utils, kernel/xpp/utils/zapconf,
kernel/xpp/utils/zconf/Zaptel/Hardware/PCI.pm,
kernel/wcte12xp/gpakenum.h, kernel/wcte12xp/GpakApi.c,
kernel/xpp/utils/xpp_sync, kernel/xpp/card_fxo.c,
kernel/Makefile, kernel/wcte12xp/GpakApi.h, patlooptest.c,
patgen.c, kernel/pciradio.rbt, /, kernel/xpp/card_fxs.c,
kernel/xpp/card_fxo.h, kernel/xpp/utils/zaptel-helper,
kernel/xpp/utils/zaptel_hardware, wcusb.c (removed),
kernel/xpp/card_fxs.h, kernel/wctdm24xxp/gpakErrs.h,
kernel/zaptel-base.c: Move kernel stuff to under kernel/ (merged
branch /zaptel/team/tzafrir/move ) Closes issue #7117.
2008-02-03 03:43 +0000 [r3785] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* zaptel.h, zaptel-base.c: Fix building in 2.4 w/devfs. Closes
issue #11884 (There's still the msleep warning).
2008-02-01 23:32 +0000 [r3783] Kevin P. Fleming <kpfleming@digium.com>
* doc/module-parameters.txt (added): add an (incomplete) text
document describing module parameters available in Zaptel modules
2008-02-01 20:10 +0000 [r3775-3779] Matthew Fredrickson <creslin@digium.com>
* zaptel-base.c: Assume if we're disabling echo can that there are
no paramters passed
* wctdm24xxp/base.c: Fix bug so that echo cancellation actually
will be disabled
2008-01-30 22:53 +0000 [r3767] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/utils/zconf/Zaptel/Config/Defaults.pm, /: Don't fail zapconf
if no config file was found. Merged revisions 3766 via svnmerge
from http://svn.digium.com/svn/zaptel/branches/1.2
2008-01-28 21:10 +0000 [r3754] Matthew Fredrickson <creslin@digium.com>
* wctdm24xxp/base.c: Allow echo canceller parameters to be updated
dynamically
2008-01-27 23:10 +0000 [r3748] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* wcte12xp/Makefile, Makefile, wct4xxp/Makefile, wctc4xxp/Makefile,
wctdm24xxp/Makefile, xpp/Makefile: * Include Kbuild from $(src).
* This is up to 2.6.9, not 2.6.8.
2008-01-26 00:21 +0000 [r3745] Kevin P. Fleming <kpfleming@digium.com>
* wctdm24xxp/GpakCust.h, /: Merged revisions 3744 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r3744
| kpfleming | 2008-01-25 18:19:19 -0600 (Fri, 25 Jan 2008) | 5
lines enable this module to build against kernels < 2.6.9 (issue
#11523) Reported by: tzafrir ........
2008-01-26 00:09 +0000 [r3742] Jason Parker <jparker@digium.com>
* ztmonitor.c: Swap RX and TX streams in ztmonitor, as the files
were being saved incorrectly. Add several defines, and modify
many "magic numbers" to use them correctly (see above) Fix error
message in audio_open() (closes issue #11194) Reported by:
meneault Patches: ztmonitor-c_patch_txrx_1_4_rev3121 uploaded by
meneault (license 260) ztmonitor-c_patch_buffer_1_4_rev3121
uploaded by meneault (license 260)
ztmonitor-c_patch_audio_1_4_rev3121 uploaded by meneault (license
260)
2008-01-25 23:23 +0000 [r3737-3739] Kevin P. Fleming <kpfleming@digium.com>
* wct4xxp/vpm450m.h: current 2.4 kernels *do* have
linux/firmware.h, so use it (closes issue #11551) Reported by:
richvdh
* wcte12xp/Makefile, wcte12xp/wcte12xp.h, wcte12xp/base.c: make
wcte12xp build successfully on 2.4 kernels, although it won't
have VPM support (closes issue #11514) Reported by: tzafrir
* zaptel-base.c: Make CONFIG_ZAPATA_NET compatible with kernels
2.6.22 and above. (closes issue #11846) Reported by: japple
2008-01-23 23:02 +0000 [r3733] sruffell <sruffell@localhost>:
* zaptel-base.c: Ensure that the zone lock is always acquired
before the channel lock. (issue #7620)
2008-01-23 21:35 +0000 [r3726-3731] Matthew Fredrickson <creslin@digium.com>
* wcte12xp/vpmadt032.c, wctdm24xxp/base.c, /, wcte12xp/base.c:
Merged revisions 3730 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r3730
| mattf | 2008-01-23 15:34:07 -0600 (Wed, 23 Jan 2008) | 1 line
Make some echo canceller related parameters adjustable via module
parameter ........
* wctdm24xxp/base.c: Revert part of previous commit which wasn't
supposed to be merged yet
* wctdm24xxp/base.c, zaptel.h: Let an echocan parameter be a signed
value. Also, for convenience, add a place for echocan parameters
in the zt_echocanparams structure
2008-01-21 23:15 +0000 [r3721] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* wct4xxp/Kbuild, wctc4xxp/Kbuild, wctdm24xxp/Kbuild,
wcte12xp/Kbuild: Fix my regression from r3706: Make sure
HOTPLUG_FIRMWARE has effect on the CFLAGS of kernel modules.
Closes issue #11806 .
2008-01-21 21:51 +0000 [r3718] Kevin P. Fleming <kpfleming@digium.com>
* wctdm.c, wctdm24xxp/base.c, zaptel-base.c: Report battery loss on
FXO ports of analog cards as a 'red alarm' on the respective
channel. (closes issue #8290) Reported by: tmarkov Patches:
8290-alarm-total_1_4_rev3705 uploaded by meneault Tested by:
flefoll
2008-01-21 20:54 +0000 [r3716] Jason Parker <jparker@digium.com>
* zaptel-base.c: Fix compiler error when building with
CONFIG_ZAPATA_PPP. Closes issue #11807.
2008-01-20 13:38 +0000 [r3706-3711] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* Makefile, /: Make sure README.Astribank's HTML copy has a
complete table of contents. Merged revisions 3710 via svnmerge
from http://orig.digium.com/svn/zaptel/branches/1.2
* zaptel.h, zconfig.h, zaptel-base.c: Add zconfig build time option
OPTIMIZE_CHANMUTE. Disabled by default. When enabled, a zaptel
channel will have an extra boolean flag: chanmute. If true,
Zaptel needs not waste CPU cycles for copying data for this
channel. If you do not enable the option, this commit should have
no effect.
* Kbuild (added), Makefile, wctc4xxp/Kbuild, Makefile.kernel26
(removed): Some more separation of kernel build Makefile from
original one. This is a small change functionality-wise but makes
it much simpler to move things around. It also fixes the major
issue of issue #11141, with only xpp issue left for proper kernel
2.6.24 support.
2008-01-17 20:49 +0000 [r3701] Doug Bailey <dbailey@digium.com>
* wctdm24xxp/wctdm24xxp.h, wctdm.c, wctdm24xxp/base.c: Added
modified patch so that the ring detect method can be set using a
module parameter. Setting fwringdetect=1 enables the method
submitted by this user. (closes issue #9264) Reported by: mjagdis
Tested by: benbrown
2008-01-14 Russell Bryant <russell@digium.com>
* Zaptel 1.4.8 released
2008-01-14 18:33 +0000 [r3686-3688] Kevin P. Fleming <kpfleming@digium.com>
* wctdm24xxp/wctdm24xxp.h, wctdm.c, wctdm24xxp/base.c: revert this
change from issue #9264 for now, as it needs more testing before
being put into a release branch
* ztcfg.c, tonezone.c: make ztcfg able to tolerate tone zones
already being loaded and selected as default (or in use by
channels) without aborting the configuration process
2008-01-12 16:24 +0000 [r3676-3682] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* wcfxo.c: Symbolic names to registers in wcfxo: wcfxo-regs by
meneault from issue #11057.
* wcfxo.c: Remove the hex that prevented wcfxo international
settings from working. Patch wcfxo-hexa by meneault from issue
#11057.
* wcfxo.c: Detect cards that do not support international settings:
Cards based on si3035 can not be set with international settings.
This can be tested using REVB (reg. 13, bits 2:5). This commit
tests for that value. It also adds some debugging macros, based
on xpp/zap_debug.h , those maybe those macros should be moved to
a more common place.
* zaptel-base.c: Don't free a tone zone that was not created. (So
why does tonezone.c do that?) Closes issue #10593 . Sorry for the
noise.
* doc: Ignore generated html-zed man pages.
2008-01-11 23:37 +0000 [r3670-3674] Kevin P. Fleming <kpfleming@digium.com>
* wctdm24xxp/wctdm24xxp.h, wctdm.c, wctdm24xxp/base.c: Improve ring
detection when polarity reversals are present. (closes issue
#9264) Reported by: mjagdis Patches: zaptel-ring.diff uploaded by
mjagdis (modified by me to add support in wctdm24xxp as well)
Tested by: benbrown
* wctdm24xxp/wctdm24xxp.h, wctdm24xxp/base.c: finish updating to
support echocan params ioctl, even though the parameters are
currently ignored
* wcte12xp/base.c: minor cleanups
* wctdm24xxp/base.c: restore ability of this driver to compile...
will finish echo can params code later
2008-01-11 22:07 +0000 [r3669] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* wcfxo.c: * Reduce indentation in wcfxo.c . * Also improve an
error message there.
2008-01-11 21:35 +0000 [r3665-3667] Kevin P. Fleming <kpfleming@digium.com>
* zconfig.h, zaptel-base.c: Implement atomic reference counting for
tone zone structures, ensuring that they will never be freed
while they are in use by a channel or as the default zone. In
passing, improve default zone handling so that there will never
be a default zone value pointing to a zone that hasn't been
loaded yet. (closes issue #10593) Reported by: jmhunter Patches
were provided by Matti, but a different solution was chosen
* wctdm24xxp/base.c, zaptel-base.c: remove some macros that are no
longer needed
2008-01-11 20:39 +0000 [r3664] Russell Bryant <russell@digium.com>
* /, zaptel-base.c: Merged revisions 3663 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r3663
| russell | 2008-01-11 14:38:47 -0600 (Fri, 11 Jan 2008) | 8
lines Revert an unnecessary trylock. Multiple people have looked
at this and nobody can see any reason why this would be required.
(closes issue #10791) Reported by: Matti Patches: patch uploaded
by Matti (license 109) ........
2008-01-11 20:22 +0000 [r3662] Kevin P. Fleming <kpfleming@digium.com>
* kb1ec.h, adt_lec.c, mg2ec.h: apparently strcasecmp() is a fairly
recent addition to the kernel, so use the older method of forcing
the string to lowercase and using strcmp() instead for parameter
parsing
2008-01-11 19:45 +0000 [r3659-3660] sruffell <sruffell@localhost>:
* wcte12xp/base.c: Minor formatting change.
* wcte12xp/base.c: Elimates a recursive grab of a spinlock in the
interrupt handler for the wcte12xp.
2008-01-10 23:59 +0000 [r3649-3654] Kevin P. Fleming <kpfleming@digium.com>
* mg2ec_const.h, kb1ec.h, kb1ec_const.h, mg2ec.h: finish converting
aggressive suppression mode to runtime control
* kb1ec.h, mg2ec.h: ensure that any non-zero value supplied will
turn on aggressive mode
* kb1ec.h: add runtime-controllable aggressive suppression to KB1
as well
* mg2ec.h: umm... should have compiled in both modes before
committing
* mg2ec.h: add runtime-control to MG2 aggressive suppression
(compile-time control is still available, but only sets the
default mode of operation)
* adt_lec.c (added), wcte12xp/vpmadt032.c, adt_lec.h (added),
wcte12xp/vpmadt032.h, wcte12xp/base.c: add some code to parse
parameters for ADT-based echo cancelers, and update the wcte12xp
driver to be able to push the parameters all the way down to the
DSP initialization function (actually pushing them out to the DSP
will come later)
2008-01-10 20:24 +0000 [r3646-3647] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* live_zap: live_zap: Add an 'exec' command to execute commands in
the 'live' environmnt.
* xpp/xpp_zap.c, xpp/utils/zconf/Zaptel/Config/Defaults.pm,
xpp/xproto.c, xpp/Changelog_xpp, xpp/xproto.h, xpp/xpd.h,
xpp/utils/zconf/Zaptel/Chans.pm, xpp/card_bri.c, xpp/xbus-core.c,
xpp/utils/zconf/Zaptel.pm, xpp/utils/zconf/Zaptel/Xpp/Xpd.pm,
xpp/utils/fpga_load.c, xpp/utils/lszaptel, xpp/xdefs.h,
xpp/utils/zapconf, xpp/utils/zconf/Zaptel/Hardware/PCI.pm,
xpp/.version, xpp/card_pri.c, xpp/card_fxo.c, xpp/xframe_queue.c,
xpp/Kbuild, xpp/README.Astribank, xpp/card_global.c,
xpp/utils/zaptel_hardware, xpp/Makefile, xpp/utils/Makefile,
xpp/xbus-pcm.c, xpp/zap_debug.c, xpp/zap_debug.h,
xpp/utils/zconf/Zaptel/Xpp/Line.pm (added), /,
xpp/utils/zconf/Zaptel/Span.pm, xpp/utils/astribank_hook,
xpp/init_card_9_29, xpp/xpp_usb.c: xpp.r5254: * Improved polarity
reversal hangups in FXO (r5194). Fixed false detection of
polarity reversals. * Optimize xframe allocation, by not zeroing
the whole memory (in get_xframe()). * Fixed erronous error
message that appeared sometimes from fpga_load during USB
renumeration. * Zaptel::Chans now provides battery() reporting
for some FXO channels (Astribank FXO and wcfxo). Merged revisions
3643 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
2008-01-09 22:53 +0000 [r3639-3641] Matthew Fredrickson <creslin@digium.com>
* fxotune.c, fxotune.h, /: Merged revisions 3640 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r3640
| mattf | 2008-01-09 16:51:57 -0600 (Wed, 09 Jan 2008) | 1 line
BIG fxotune update. New version which uses fourier analysis for
echo return loss measurement. Much more accurate than the old
version, and can penetrate through background noise that may be
on the line as well as noise caused by tones in the background
such as reorder or congestion if the timing parameters aren't
exactly right in the setup. If you have analog fxo modules, it is
recommended that you run fxotune on them again with this latest
version. You will definitely see even better results ........
* wcte12xp/vpmadt032.c, wctdm24xxp/base.c, /: Merged revisions 3638
via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r3638
| mattf | 2008-01-09 16:46:47 -0600 (Wed, 09 Jan 2008) | 1 line
Make sure G.165 EC disable tone detection is enabled ........
2008-01-09 17:21 +0000 [r3632-3636] Kevin P. Fleming <kpfleming@digium.com>
* wcte12xp/vpmadt032.c, wcte12xp/base.c: eliminate compiler
warnings about unused variables
* zttranscode.c, zaptel.h, zaptel-base.c: For systems using a
dynamic device filesystem (pretty much everything now), don't
register the character device for transcoder support unless the
'zttranscode'module is loaded. This will result in zttranscode no
longer being automatically loaded when there are no transcoders
present but Asterisk's codec_zap is loaded to look for them. The
zttranscode module will get loaded if any transcoder driver
modules are loaded, so users with transcoders will not see any
change in behavior.
* zaptel-base.c: use the proper error code for 'no hardware echo
canceler available'
2008-01-08 22:09 +0000 [r3626-3628] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* Makefile: Slightly saner man -> html.
* Makefile: Another little documentation aid.
* doc/patgen.8 (added), README, doc/ztdiag.8 (added), doc/pattest.8
(added): Documentation updates.
2008-01-07 10:04 +0000 [r3620] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* patgen.c, patlooptest.c: Fix some usage messages.
2008-01-04 22:54 +0000 [r3618] sruffell <sruffell@localhost>:
* wcte12xp/vpmadt032.c, wcte12xp/base.c: Increase the amount of
code that is protected by locks in the wcte12xp interrupt
handler.
2008-01-04 18:03 +0000 [r3615] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* zaptel-base.c: Remove a debug print that found its way into
patch. One of them misleading.
2008-01-04 17:20 +0000 [r3609-3613] Kevin P. Fleming <kpfleming@digium.com>
* zaptel.h, zaptel-base.c: [commit message] (issue #10393) Reported
by: tzafrir Patches: chan_alarm_zaptel.diff uploaded by tzafrir
(license 46) (modified by me)
* xpp/utils: fix a small annoyance
* wctdm.c, wctdm24xxp/base.c, zaptel.h: various minor cleanups
2008-01-03 23:37 +0000 [r3607] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* live_zap: * Use inline perl to get list of module instead of
script from xpp/utils, as xpp/utils is not copied to remote rsync
copy. * Make sure we set environment early enough to run perl
code.
2008-01-03 22:23 +0000 [r3604-3605] Kevin P. Fleming <kpfleming@digium.com>
* mg2ec.h: restore a line of code that was accidentally removed
* zaptel-base.c: re-add proper support for boards with hardware
echo cancellers
2008-01-03 17:13 +0000 [r3601] sruffell <sruffell@localhost>:
* wcte12xp/vpmadt032.c, wctdm24xxp/GpakCust.c: Removing some left
over debugging code.
2008-01-03 16:52 +0000 [r3596-3600] Kevin P. Fleming <kpfleming@digium.com>
* zaptel.h, zaptel-base.c: a little bit of code cleanup and use
explicit-size types for new ioctl structures
* zaptel.h, zaptel-base.c: expose the limit for echocan params so
programs will know what to expect
2008-01-02 20:35 +0000 [r3592-3593] sruffell <sruffell@localhost>:
* wctdm24xxp/GpakCust.c: Corrected unneeded return value.
* wctdm24xxp/wctdm24xxp.h, wcte12xp/vpmadt032.c, wctdm24xxp/base.c,
wctdm24xxp/GpakCust.c: VPMADT032 stability changes for wctdm24xxp
and wcte12xp: - Remove double reads. - Wait for writes to
complete before starting reads. - Optimize reads of multi-word
register.
2008-01-02 18:00 +0000 [r3589-3590] Kevin P. Fleming <kpfleming@digium.com>
* zaptel.h: allow longer parameter names
* mec.h (removed), kb1ec.h, mec2.h (removed), mec3.h (removed),
Makefile, sec-2.h, mec3-float.h (removed), sec.h, mec2_const.h
(removed), hpec/hpec_zaptel.h, mg2ec.h, zaptel.h, zconfig.h,
zaptel-base.c: bring back the echocan-params code that was
removed in r3545, this time with a small change made to ensure
backwards compatibility with existing applications at both the
binary and source code level
2008-01-02 15:20 +0000 [r3586] sruffell <sruffell@localhost>:
* wctdm24xxp/base.c, wcte12xp/base.c: Move the release of VPMADT032
resources to after the interrupt handler has been freed. Closes a
small window of opportunity for NULL pointer access at driver
unload time.
2007-12-31 13:32 +0000 [r3584] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* build_tools/test_kernel_git: Allow passing an arbitrary parameter
to the build command.
2007-12-30 09:20 +0000 [r3569-3582] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* build_tools/test_kernel_git: * git-reset --hard instead of
git-checkout (Paolo Ornati). * "update" command to pull an update
from upstream repo.
* build_tools/test_kernel_git: The script now will not require
unnecessary parameters: it saves them in
build_tools/git_test.conf
* /, ztd-eth.c: Adapt ztd-eth to newer interfaces from kernel
2.6.24 . Merged from branches/1.2 rev. 3577 .
* ztdynamic.c: Add CAS to channel capabilities of ztdynamic (Patch
by brettcar). Closes issue #11445 .
* build_tools/test_kernel_git (added): A script to build zaptel vs.
a kernel version from a git tree. This should help test building
vs. kernels in Linus's tree (as of 2.6.11).
* live_zap: * modules now can take parameters from live.conf
(${module}_ARGS). * zapconf's settings are taken from live.conf .
* Added 'reload' for 'unload; load' .
* xpp/utils/zconf/Zaptel/Chans.pm: Do detect the type of a wcfxo
channel.
2007-12-27 20:35 +0000 [r3565-3566] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* live_zap: * Some extra hooks to echo canceller modules. * Give
harware modules detection^guessing a chance.
* /, xpp/README.Astribank: Update documentation. Mainly regarding
the PRI module. Merged revisions 3564 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
2007-12-27 18:02 +0000 [r3561] sruffell <sruffell@localhost>:
* wcte12xp/vpmadt032.c: Shouldn't destroy the workqueue with the
lock held.
2007-12-24 21:48 +0000 [r3556] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/utils/zconf/XppUtils.pm (removed), xpp/.version,
xpp/utils/xpp_sync, xpp/utils/zconf/Zaptel/Chans.pm,
xpp/utils/zconf/Zaptel/Utils.pm (added), /, xpp/README.Astribank,
xpp/utils/zconf/Zaptel/Span.pm,
xpp/utils/zconf/Zaptel/Xpp/Xpd.pm, xpp/Changelog_xpp,
xpp/utils/zconf/Zaptel/Hardware/USB.pm,
xpp/utils/zconf/Zaptel/Hardware/PCI.pm,
xpp/utils/zconf/Zaptel/Xpp/Xbus.pm: * XppUtils.pm renamed
Zaptel::Utils.pm . * Some more documentation. Merged revisions
3555 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
2007-12-21 15:25 +0000 [r3552-3553] Kevin P. Fleming <kpfleming@digium.com>
* wcte11xp.c, wct1xxp.c: fix a bug in wct1xxp (pointed out on
asterisk-dev) and a minor cleanup in wcte11xp.c
* arith.h: coding guidelines cleanup
2007-12-20 22:09 +0000 [r3550] sruffell <sruffell@localhost>:
* wcte12xp/vpmadt032.c: Cleanup in case the firmware load from
userspace fails.
2007-12-20 17:09 +0000 [r3548] Doug Bailey <dbailey@digium.com>
* arith.h: Add blackfin enhancement. Closes issue #0011283
2007-12-20 01:19 +0000 [r3545] Kevin P. Fleming <kpfleming@digium.com>
* mec.h (added), kb1ec.h, mec2.h (added), mec3.h (added), Makefile,
sec-2.h, mec3-float.h (added), sec.h, mec2_const.h (added),
hpec/hpec_zaptel.h, mg2ec.h, zaptel.h, zconfig.h, zaptel-base.c:
revert the echocanparams code for now... it's not ready to be
used
2007-12-19 22:48 +0000 [r3541] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/.version, xpp/card_pri.c, /, xpp/utils/zconf/Zaptel/Span.pm,
xpp/Changelog_xpp, xpp/init_card_9_29, xpp/utils/genzaptelconf,
xpp/utils/zapconf: * A few more fixes to card_pri. * Do use
"crc4" for E1 by default when generating zaptel.conf . Merged
revisions 3540 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
2007-12-19 20:05 +0000 [r3535] sruffell <sruffell@localhost>:
* wcte12xp/vpmadt032.c, wctdm24xxp/GpakCust.c: Improve wctdm24xxp
and wcte12xp drivers' tolerance to host system latencies.
2007-12-19 19:39 +0000 [r3529] Jason Parker <jparker@digium.com>
* zaptel.init: You need a space after [, since [ is an application
2007-12-19 19:34 +0000 [r3528] Russell Bryant <russell@digium.com>
* Makefile, makeopts.in: There is an architectural issue with the
way menuselect works in zaptel. If the menuselect.makeopts file
gets automatically created when running make, then the Makefile
does not get the contents of that file included. The bug exposed
itself where libnewt was not found, but we tried to build it
anyway. This hack prevents that from happening, but the larger
issue needs to be addressed. It can be fixed once the actual
building of the modules and userspace tools are done by sub
Makefiles ... (closes issue #11199) Reported by: dimas Patches:
newt_select_makefile.diff uploaded by tzafrir (license 46)
2007-12-19 06:45 +0000 [r3516-3526] Kevin P. Fleming <kpfleming@digium.com>
* hpec/hpec_zaptel.h, zaptel-base.c: eliminate a compiler warning
and restore the ability to use HPEC (without parameters for now)
* mec.h (removed), kb1ec.h, mec2.h (removed), mec3.h (removed),
Makefile, sec-2.h, mec3-float.h (removed), sec.h, mec2_const.h
(removed), mg2ec.h, zaptel.h, zconfig.h, zaptel-base.c: add
ability to provide parameters to echo cancelers on a per-channel
basis, and remove the three versions of the 'Mark' echo canceler
(later replaced by KB1 and then by MG2)
* zaptel-base.c: even though it's not very logical, having a 'next
sample' number of zero for a sample is valid, so restore the
ability to set one
2007-12-18 18:00 +0000 [r3515] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* /, zaptel.sysconfig: Enable xpp_usb in the sysconfig file as xpp
no longer generates many interrupts when there's no hardware
connected. Merged revisions 3514 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
2007-12-18 17:23 +0000 [r3513] Kevin P. Fleming <kpfleming@digium.com>
* /: remove some accidentally merged properties
2007-12-18 16:36 +0000 [r3501-3511] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* /: Block r3509 from 1.4 .
* xpp/xpp_zap.c, xpp/utils/hexfile.c, xpp/README.metering
(removed), xpp/utils/xpp_fxloader.usermap,
xpp/firmwares/FPGA_1151.hex, xpp/xpp_zap.h, xpp/xproto.c,
xpp/Changelog_xpp, xpp/utils/example_default_zaptel,
xpp/firmwares/FPGA_FXS.hex, xpp/xpd.h, xpp/xproto.h,
xpp/utils/zconf/Zaptel/Chans.pm, xpp/utils/xpp_blink,
xpp/card_bri.c, xpp/xbus-core.c, xpp/utils/zconf/Zaptel.pm,
xpp/utils/test_parse.c, xpp/utils/xpp_fxloader,
xpp/utils/zconf/Zaptel/Xpp/Xpd.pm, xpp/utils/fpga_load.c,
xpp/xbus-core.h, xpp/xdefs.h, xpp/utils/zapconf,
xpp/utils/zconf/Zaptel/Hardware/PCI.pm, xpp/utils/xpp_sync,
xpp/.version, xpp/card_pri.c, xpp/firmwares/FPGA_1141.hex,
xpp/card_fxo.c, xpp/xframe_queue.c (added), xpp/xbus-sysfs.c,
xpp/Kbuild, xpp/README.Astribank, xpp/card_fxs.c,
xpp/card_global.c, xpp/card_fxo.h, xpp/xframe_queue.h (added),
xpp/utils/zaptel_hardware, xpp/xbus-pcm.c (added),
xpp/utils/zconf/Zaptel/Hardware/USB.pm, xpp/card_global.h,
xpp/utils/zconf/Zaptel/Xpp/Xbus.pm, xpp/utils/zconf/XppUtils.pm
(added), xpp/xbus-pcm.h (added),
xpp/utils/zconf/Zaptel/Hardware.pm, xpp/zap_debug.h,
xpp/utils/zt_registration, /, xpp/utils/zconf/Zaptel/Span.pm,
xpp/utils/zaptel_drivers, xpp/init_card_9_29,
xpp/utils/genzaptelconf, xpp/utils/zconf/Zaptel/Xpp.pm,
xpp/xpp_usb.c: xpp r5151: * xpd_pri: Basically ready. * PCM
synchronization changes: - Each Astribank unit ticks
independently. Each with its own PLL. - HOST synchronization is
gone. Loading of xpp will no longer cause useless 250 ticks per
second if you have no Astribank. - Synchronization from the
zaptel sync master requires setting ZAPTEL as sync source
(xpp_sync ZAPTEL). * rx_tasklet is now a parameter of the module
xpp, rather than of xpp_usb. * New FPGA firmware: 5128 (1151) /
5122 (1141, 1131): - Fixes synchronization issues. - PRI module:
E1 should now work. * perl module and utilities: - Modules no
longer magically scan system on initialization. - Scanning is by
calling explicit methods. - "Serial" has been renamed "Label". It
is basically unique, but should be modifieble. - Some basic
documentation of zaptel perl modules. * Default sort order of
zt_registration is back to SORT_CONNCTOR. * zt_registration proc
file now shows the number of span registered to if registered.
Try: grep . /proc/xpp/XBUS-*/XPD-*/zt_registration *
genzaptelconf: Allow using a custom command instead of
/etc/init.d/asterisk to start/stop asterisk. * Fixed the typo
"Slagish". Merged revisions 3506 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
* wcfxo.c: Detect some extra X101P clones out there.
2007-12-16 20:45 +0000 [r3494-3495] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* Makefile: Make sure the asciidoc menu is deep enough.
* /, build_tools/genudevrules: Simplify udev rules so they will be
in line with ones provided by distributions and allow simple
overriding of file permissions. Closes issue #11276 . Merged
revisions 3493 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
2007-12-14 23:47 +0000 [r3490] Kevin P. Fleming <kpfleming@digium.com>
* digits.h, Makefile, gendigits.c (removed), /, tonezone.c,
wcusb.c, zaptel.h, zonedata.c, tonezone.h, zaptel-base.c:
(merging dtmf-twister branch plus a few fixes) move DTMF/MF
generation into tonezone.c (libtonezone) so that it can happen at
runtime instead of compile time; this allows for DTMF/MF to be
different on a zone-by-zone basis without requiring a recompile
of Zaptel set DTMF 'twist' for Brazil (zone 'br') to 2dB
2007-12-13 22:59 +0000 [r3476] Kevin P. Fleming <kpfleming@digium.com>
* ppp/zaptel.c, /: Merged revisions 3475 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r3475
| kpfleming | 2007-12-13 16:59:16 -0600 (Thu, 13 Dec 2007) | 2
lines remove some code that is not compatible with modern
versions of pppd ........
2007-12-13 Kevin P. Fleming <kpfleming@digium.com>
* Zaptel 1.4.7.1 released
2007-12-13 Kevin P. Fleming <kpfleming@digium.com>
* wcte12xp.c: add new product support
2007-11-27 Matthew Fredrickson <creslin@digium.com>
* Zaptel 1.4.7 released.
2007-11-22 00:29 +0000 [r3242-3245] Matthew Fredrickson <creslin@digium.com>
* wct4xxp/base.c: Make sure that's disabled until I retest that
* wctdm24xxp/wctdm24xxp.h, wctdm24xxp/base.c, /: Merged revisions
3243 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r3243
| mattf | 2007-11-21 17:51:48 -0600 (Wed, 21 Nov 2007) | 1 line
Add new product support ........
* wctc4xxp/base.c, /: Merged revisions 3241 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r3241
| mattf | 2007-11-21 16:45:32 -0600 (Wed, 21 Nov 2007) | 1 line
Transcoder driver updates. Fixes G.723 no audio issues with
latest drivers ........
2007-11-14 15:22 +0000 [r3233] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/xpp_zap.c, xpp/.version, xpp/utils/print_modes.c,
xpp/init_card_3_29, /, xpp/init_card_4_29, xpp/Changelog_xpp: xpp
r5010: * Fix a deadlock spotted on some SMP installations. *
Improve (reduce) signal attenuation on FXO ports. * Increase FXS
ring detect debounce interval. Merged revisions 3229-3232 via
svnmerge from http://svn.digium.com/svn/zaptel/branches/1.2
2007-11-11 01:22 +0000 [r3223-3226] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* Makefile, tor2ee.c (removed): tor2ee doesn't build. Remove it.
Closes #10278.
* /, ztmonitor.c: ztmonitor: Get rid of a pointless static buffer
and strcpy. And also give a more useful conversion message.
Merged revisions 3222 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
2007-11-08 21:48 +0000 [r3221] Tilghman Lesher <tlesher@digium.com>
* zttool.c: Add dependency on newt Reported by: dimas Patch by:
tilghman Closes issue #11199
2007-11-07 20:18 +0000 [r3218-3220] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* Makefile: Don't try to generate bindir and mandir if there are no
binaries to install (this causes an invalid install command).
* build_tools: make_firmware_object is now generated. Ignore it.
* xpp/utils/zconf/Zaptel/Chans.pm, /, xpp/utils/genzaptelconf,
xpp/utils/zconf/Zaptel/Hardware/PCI.pm: * zaptel-perl,
genzaptelconf: Detect and list Rhino cards. * zaptel-perl: Fix
reporting of empty slots in analog Digium cards. * genzaptelconf:
More readable case-s. Merged revisions 3217 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
2007-11-06 21:14 +0000 [r3216] Matthew Fredrickson <creslin@digium.com>
* wctdm24xxp/base.c, /: Merged revisions 3215 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r3215
| mattf | 2007-11-06 15:13:09 -0600 (Tue, 06 Nov 2007) | 1 line
Cross port fxo line voltage monitoring patch from wctdm to
wctdm24xxp ........
2007-11-03 16:23 +0000 [r3211] Matthew Fredrickson <creslin@digium.com>
* firmware/Makefile, wctc4xxp/base.c: Major update for tc4xxp
driver. Fixes many outstanding issues related to channel lockups,
etc. It also raises the maximum channel count for g.729 to 120
channels.
2007-10-31 21:09 +0000 [r3206] Mark Michelson <mmichelson@digium.com>
* sethdlc-new.c, /, sethdlc.c: Merged revisions 3205 via svnmerge
from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........
r3205 | mmichelson | 2007-10-31 16:08:15 -0500 (Wed, 31 Oct 2007)
| 5 lines Fixed potential buffer overflow. See AST-2007-024 for
more details ........
2007-10-31 13:10 +0000 [r3202] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* /: Blocking merge of r3201 which is a backport from 1.4 .
2007-10-28 18:26 +0000 [r3198] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* firmware/Makefile, build_tools/make_firmware_object (removed),
configure, build_tools/make_firmware_object.in (added),
configure.ac: Firmware object file building does not depend
anymore on another object to be linked into the same module. That
dependency existed solely for checking target binary properties
in make_firmware_object . Those properties are now checked in
autoconf.
2007-10-27 16:33 +0000 [r3195] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* Makefile, configure, configure.ac, makeopts.in: Detect SELinux
support (for install target) in autoconf. Can be manually
overriden in configure or make.
2007-10-26 15:36 +0000 [r3190] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* ztdummy.c, wct4xxp/base.c, wcte11xp.c, wcte12xp.c, wctdm.c,
wctdm24xxp/base.c, tor2.c, zaptel-base.c: If you depend on
anything that is not in /usr/include/zaptel , you must build with
the local zaptel.h . Otherwise you may mix two versions of Zaptel
.
2007-10-26 15:12 +0000 [r3189] Matthew Fredrickson <creslin@digium.com>
* wctdm24xxp/base.c, /: Merged revisions 3188 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r3188
| mattf | 2007-10-26 10:08:37 -0500 (Fri, 26 Oct 2007) | 1 line
Another clock polarity update. To fix garbage audio on some
systems with the wctdm24xxp driver and VPMADT032 ........
2007-10-26 13:34 +0000 [r3185] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* wcfxsusb.h (removed), Makefile, wcfxsusb.c (removed): Remove
obsolete drivers (replaced by wcusb).
2007-10-18 22:56 +0000 [r3170] Jason Parker <jparker@digium.com>
* wct4xxp/base.c, /: Merged revisions 3169 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r3169
| qwell | 2007-10-18 17:56:14 -0500 (Thu, 18 Oct 2007) | 4 lines
Correct the name of the wct4xxp driver. Issue 11030 ........
2007-10-18 Matthew Fredrickson <creslin@digium.com>
* Zaptel 1.4.6 released.
2007-10-18 20:53 +0000 [r3161] Matthew Fredrickson <creslin@digium.com>
* wct4xxp/base.c: Make sure we only increment timingslips when
there actually are timing slips, instead of everytime we service
the framer
2007-10-18 20:32 +0000 [r3154-3158] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/utils/zconf/Zaptel/Chans.pm, /: Fix zaptel_hardware's
behaviour for unknown span types. Merged revisions 3157 via
svnmerge from http://svn.digium.com/svn/zaptel/branches/1.2
* xpp/.version, /, xpp/init_card_4_29, xpp/Makefile,
xpp/Changelog_xpp, xpp/utils/zconf/Zaptel/Hardware/USB.pm,
xpp/utils/zconf/Zaptel/Xpp.pm: * zaptel-perl should not panic
when there is no /proc/bus/usb (Closes #11020). * Don't build
metering by default for now. * And this is xpp rev 4900. * Make
opermode work again. Merged revisions 3152-3153 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
2007-10-16 20:25 +0000 [r3143-3147] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* README, /: Update README yet again.
* xpp/xpp_zap.c, xpp/.version, xpp/card_pri.c, xpp/card_fxo.c,
xpp/firmwares/USB_FW.hex (added), xpp/card_fxs.c,
xpp/README.Astribank, xpp/utils/zaptel_hardware, xpp/xproto.c,
xpp/Changelog_xpp (added), xpp/firmwares/USB_1130.hex (removed),
xpp/utils/zconf/Zaptel/Hardware/USB.pm,
xpp/firmwares/USB_1140.hex (removed),
xpp/utils/zconf/Zaptel/Xpp/Xbus.pm, xpp/xpd.h, xpp/xproto.h,
xpp/firmwares/USB_1150.hex (removed),
xpp/utils/zconf/Zaptel/Hardware.pm, xpp/ChangeLog (removed),
xpp/utils/zt_registration, xpp/xbus-core.c, /,
xpp/utils/xpp_fxloader, xpp/utils/zaptel_drivers (added),
xpp/utils/fpga_load.c, xpp/xdefs.h,
xpp/utils/zconf/Zaptel/Xpp.pm,
xpp/utils/zconf/Zaptel/Hardware/PCI.pm, xpp/xpp_usb.c: xpp r4892:
* Zaptel/Hardware perl modules: - Use sysfs directly. Don't rely
on lspci/lsusb. - Each device has a description and driver name.
- Zaptel::Hardware::drivers() to show the list of required
drivers for this system (see zaptel_drivers). - zaptel_hardware
shows a description and a (suggested?) driver. * zt_registration
sorts by Serial first and only then by connector. * USB_FW.hex
replaces all the USB_11x0.hex . - Separate USB interface for the
management processor. - Hence fpga_load can now work even with
drivers loaded. * Fix firmware upgrading. * Fix manual firmware
loading while auto-loading. Merged revisions 3142 via svnmerge
from http://svn.digium.com/svn/zaptel/branches/1.2
2007-10-16 16:40 +0000 [r3139] Kevin P. Fleming <kpfleming@digium.com>
* /: use latest Octasic API release
2007-10-12 22:25 +0000 [r3133] Matthew Fredrickson <creslin@digium.com>
* wctdm24xxp/base.c, /: Merged revisions 3132 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r3132
| mattf | 2007-10-12 17:19:58 -0500 (Fri, 12 Oct 2007) | 1 line
Fix for false power alarms, as well as a clock polarity issue
........
2007-10-07 15:05 +0000 [r3121] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* README: Update the links section (including an on-line HTML copy
of the README).
2007-10-04 18:06 +0000 [r3113] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* README, contrib (removed), /, build_tools/install_prereq
(removed), install_prereq (added): * install_prereq is not a
build script. Move it to main directory (which is our scripts
directory). * Don't run/print install command when there's
nothing to install. * Fix install_prereq command in README .
Merged revisions 3109-3112 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
2007-10-03 17:05 +0000 [r3106] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/xpp_zap.c, xpp/utils/hexfile.c, xpp/firmwares/FPGA_1151.hex,
xpp/utils/hexfile.h, xpp/xproto.c, xpp/firmwares/FPGA_FXS.hex,
xpp/xproto.h, xpp/xpd.h, xpp/ChangeLog, xpp/xbus-core.c,
xpp/init_card_4_28 (removed), xpp/init_card_4_29 (added),
xpp/init_card_6_28 (removed), xpp/init_card_6_29 (added),
xpp/utils/fpga_load.c, xpp/xdefs.h, xpp/utils/zapconf,
xpp/.version, xpp/firmwares/FPGA_1141.hex, xpp/card_fxo.c,
xpp/xbus-sysfs.c, xpp/utils/zaptel_hardware, xpp/utils/Makefile,
xpp/init_card_3_28 (removed), xpp/utils/zt_registration,
xpp/init_card_3_29 (added), /, xpp/init_card_7_28 (removed),
xpp/init_card_7_29 (added), xpp/init_card_9_28 (removed),
xpp/init_card_9_29 (added), xpp/utils/genzaptelconf,
xpp/utils/zconf/Zaptel/Xpp.pm, xpp/xpp_usb.c: New xpp release:
r4786: * New firmware protocol version: 2.9 . * fpga_load:
initial clean-ups before interface split. * genzaptelconf: Don't
leave an empty directory behind (4784) * Increase xpp
poll_timeout to 1000ms - useful for CentOS 4 (r4781). * Fix
initialization anoyance: if AB don't answer to polls, don't
waitfor_xpds, and show no waiting XPDs (r4725). * Disable
dtmf_detect by default once again (r4712). * Don't check twice
for asterisk to stop. The second test was done while Asterisk was
still stopping (r4708). * Support building the kernel with M=
instead of with SUBDIRS= , as used in some newer build systems
(r4677). Merged revisions 3105 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
2007-10-01 08:21 +0000 [r3100] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* /: No need to met those to changes back into 1.4 .
2007-09-29 01:57 +0000 [r3097] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* README: * Document the usage of ./configure . * spacing.
2007-09-26 20:11 +0000 [r3094] Tilghman Lesher <tlesher@digium.com>
* contrib/scripts/install_prereq (added), contrib (added),
contrib/scripts (added): Add a script to load package
prerequisites (closes issue #10523)
2007-09-23 00:53 +0000 [r3087-3090] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* zaptel.init: Ignore errors from fxotune -s. The channel can be
used e.g. if Asterisk is already running.
* xpp/ChangeLog, /, xpp/card_fxs.c: Re-disable dtmf_detection of
the FXS module (From xpp rev 4712). Merged revisions 3084 via
svnmerge from http://svn.digium.com/svn/zaptel/branches/1.2
2007-09-22 20:18 +0000 [r3079-3082] Matthew Fredrickson <creslin@digium.com>
* wct4xxp/base.c: Make some improvements in how we do event
retrieval
* wct4xxp/base.c: Disable that for now (DTMF detection)
2007-09-22 08:07 +0000 [r3070-3076] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* Makefile.kernel26: Makefile Automatically enabling Zaptel MMX
support. Disabled by default for now. * To enable, build with
ZAPTEL_MMX_AUTO=yes (or any other non-empty value) * There is a
white list of configuration values (without the prefix CONFIG_).
One of them needs to be set in order for CONFIG_ZAPTEL_MMX to be
enabled. * Only adds support for kernel 2.6 . If anybody finds a
simple way to do the same with 2.4 - patches are welcomes.
* ztdummy.c: Sort out print messages in ztdummy: * Proper priority
to every message. * Remove a useless global.
* zaptel.init: fxotune must be run after ztcfg.
2007-09-20 18:42 +0000 [r3067] Jason Parker <jparker@digium.com>
* Makefile: Remove DESTDIR from CONFIG_FILE, since we don't want
DESTDIR passed in as part of the -DZAPTEL_CONFIG. Closes issue
#10764, pointed out by cabal95
2007-09-20 16:52 +0000 [r3064] Matthew Fredrickson <creslin@digium.com>
* wctdm24xxp/base.c: Disable native bridging pending resolving of
some issues
2007-09-19 11:13 +0000 [r3061] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* ztcfg.c: Clarify that ztcfg prints the channel map before
actually configuring channels.
2007-09-18 10:21 +0000 [r3051-3056] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* /, xpp/Makefile: Support building the kernel with M= instead of
with SUBDIRS= , as used in some newer build systems. From xpp
r4677. Merged revisions 3055 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
* zaptel-base.c: Give proper type for printk messages.
* zaptel-base.c: Fix the ioctl ZT_CHANDIAG and enable it by
default. (Backport changeset 2384 from trunk)
2007-09-17 19:32 +0000 [r3048] Tilghman Lesher <tlesher@digium.com>
* zaptel.h, zaptel-base.c: Revert previous change on spaninfo and
institute an ABI compatible call, to avoid breaking zaptel ABI
compatibility between releases (closes issue #10745)
2007-09-16 14:55 +0000 [r3044-3045] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* fxotune.c, zaptel.init: * Run fxotune automatically on startup. *
Make fxotune -s less verbose by default so it won't make noise
for the init.d script.
* ztdummy.c, README: * Document ztdummy changes. * It's a (ztdummy)
clock source, not ztdummy type.
2007-09-15 20:40 +0000 [r3041] Matthew Fredrickson <creslin@digium.com>
* ztcfg.c: Remove silly CAS signalling conflicts... patch
2007-09-15 20:21 +0000 [r3020-3038] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* ztdummy.c: Include support for high-resolution timers for linux
>= 2.6.22 (#10314). Changes from the patch: * Only support
kernels >= 2.6.22, as hrtimer_forward is only exported as of that
version. * Adapted to my recent changes in ztdummy.c . * Use
ZAPTEL_TIME_NS instead of ZAPTEL_RATE * Simplified ticks debug
statement. Will only be used if debug=2 or debug=3 .
* ztdummy.c: Include the type of the ztdummy module in the desc
(span description) filed. To check what type of module you built,
use: strings ztdummy.ko | grep type tr '%' '\n' <ztdummy.ko |
grep -a type: Or look at the span title line in /proc/zaptel .
* ztdummy.c: ZAPTEL_RATE is not a time period.
* firmware/Makefile, Makefile: s/INSTALL_PREFIX/DESTDIR/ in
firmware/Makefile . The install target now won't fail in DESTDIR
install, but will probably do nothing.
* xpp/xpp_zap.c, xpp/firmwares/FPGA_1151.hex, xpp/xpp_zap.h,
xpp/xproto.c, xpp/firmwares/FPGA_FXS.hex, xpp/xproto.h,
xpp/xpd.h, xpp/utils/zconf/Zaptel/Chans.pm, xpp/param_doc
(added), xpp/card_bri.c, xpp/init_card_4_26 (removed),
xpp/ChangeLog, xpp/xbus-core.c, xpp/init_card_4_28 (added),
xpp/init_card_6_26 (removed), xpp/init_card_6_28 (added),
xpp/card_bri.h, xpp/xbus-core.h, xpp/utils/zapconf, xpp/.version,
xpp/card_pri.c, xpp/firmwares/FPGA_1141.hex, xpp/card_fxo.c,
xpp/card_pri.h, xpp/README.Astribank, xpp/card_fxs.c,
xpp/card_global.c, xpp/card_fxo.h, xpp/utils/Makefile,
xpp/card_global.h, xpp/card_fxs.h, xpp/init_card_3_26 (removed),
xpp/zap_debug.h, xpp/init_card_3_28 (added), xpp/init_card_7_26
(removed), /, xpp/init_card_7_28 (added), xpp/init_card_9_26
(removed), xpp/init_card_9_28 (added), xpp/xpp_usb.c: New xpp
release (Xorcom rev 4648): * New firmware protocol version: 2.8 .
* New firmwares fix input ports offhook. * Cleanup INFO()
messages during module loading. * USB: Receive queue with
TASKLETS [r4600]. Controlled by rx_tasklet parameter to xpp_usb
module (can be changed in runtime). * The pcm_tasklet parameter
in xpp module is deprecated: - Does not actually do anything. -
If set during module loading, shows an ERR() message. - Also
appears in /proc/xpp/sync * FXS: Hardware DTMF detection by
default, can be disabled by setting dtmf_detection=0 parameter to
xpd_fxs. PCM is muted when DTMF key is pressed. * zapconf: - Can
now generate users.conf compatible with asterisk-gui. - Optional
command-line arguments denoting which files to generate. Possible
values are 'zaptel', 'zapata' and 'users'. - Defaults to creating
zaptel and zapata. Merged revisions 3019 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
2007-09-13 21:58 +0000 [r3016-3017] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* zaptel.init: No need for a duplicate list of modules.
* /, zaptel.init, zaptel.sysconfig: The order of modules load
counts, if you have multiple cards. Merged revisions 3015 via
svnmerge from http://svn.digium.com/svn/zaptel/branches/1.2
2007-09-13 21:33 +0000 [r3014] Joshua Colp <jcolp@digium.com>
* /, zaptel.init, zaptel.sysconfig: Merged revisions 3013 via
svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2
........ r3013 | file | 2007-09-13 18:31:30 -0300 (Thu, 13 Sep
2007) | 2 lines Add TE120P to init script. ........
2007-09-11 18:10 +0000 [r3011-3012] Russell Bryant <russell@digium.com>
* wctdm24xxp/wctdm24xxp.h, wctdm24xxp/base.c: After committing the
patch to make ringdebounce a module parameter in wctdm, I went
ahead and made the same change to wctdm24xxp. *** Note that there
is a discrepancy here. wctdm uses 64 ms as the default ring
debounce value while this module uses 128 ms. I'm not sure which
one is more appropriate, but they should certainly default to the
same thing.
* wctdm.c: Make ringdebounce a module parameter (closes issue
#10218, pnlarsson
2007-09-09 23:42 +0000 [r3006-3008] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* zaptel.sysconfig: Also probe for wcte12xp by default (before
wcte11xp).
* xpp/.version, xpp/utils/xpp_sync, xpp/card_pri.c (added),
xpp/firmwares/FPGA_1141.hex, xpp/firmwares/FPGA_1151.hex,
xpp/README.metering, xpp/card_pri.h (added),
xpp/README.Astribank, xpp/Makefile, xpp/utils/Makefile,
xpp/utils/example_default_zaptel (added),
xpp/firmwares/FPGA_FXS.hex, xpp/xpd.h, xpp/xproto.h,
xpp/init_card_4_26, xpp/ChangeLog, /, xpp/init_card_9_26 (added),
xpp/utils/genzaptelconf, xpp/utils/zapconf, xpp/utils: xpp.r4584:
* New firmware to fix FXS leds irregularities. * Less noise at
build time - don't echo version, test compile only once. *
zapconf can generate users.conf snippets. * xpd_pri: initial
version. * ignore perlcheck. Merged revisions 3004-3005 via
svnmerge from http://svn.digium.com/svn/zaptel/branches/1.2
2007-09-08 12:08 +0000 [r2995-2999] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* Makefile, configure, configure.ac, makeopts.in: * Let autoconf
figure out the switches for asciidoc. * Remove some leftover set
-x from previous debug...
* Makefile, /, xpp: Allow overriding the asciidoc command. This
allows using asciidoc < 7. Merged revisions 2997 via svnmerge
from https://origsvn.digium.com/svn/zaptel/branches/1.2
* zttest.c: * Improve accuracy of zttest by using floats (#10312).
* Account only for the time of actually waiting for the clock. *
Clarify message for zttest -v . * Don't print some digits that
are not meaningful enough.
2007-09-04 16:16 +0000 [r2992] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* zaptel-base.c: Fixing the ZAPTEL_SYNC_TICK patch for
zaptel-base.c (#9645)
2007-09-04 14:09 +0000 [r2991] Joshua Colp <jcolp@digium.com>
* zaptel.h: (closes issue #10087) Reported by: Matti Remove comment
that is no longer true. -1 will not cause the name to be used.
2007-09-01 03:32 +0000 [r2990] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* ppp/Makefile, README, ppp, /, configure, configure.ac,
makeopts.in: * Maintain the same meaning of DESTDIR and
INSTALL_PREFIX as in main Makefile * Document ppp support to the
best of my knowledge. * Err clearly if the VERSION was not found.
* Add some basic/broken detection of ppp in autoconf. Merged
revisions 2987 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2
2007-08-31 15:56 +0000 [r2988] Jason Parker <jparker@digium.com>
* Makefile: CONFIG_FILE already has DESTDIR prepend to it. It is
not needed here. Issue 10619, patch by djflux
2007-08-30 22:47 +0000 [r2986] Tilghman Lesher <tlesher@digium.com>
* zaptel.h, zaptel-base.c: Add two fields to the spanconfig struct
(at the bottom, as suggested by tzafrir), with a define to let
modules know that it's there
2007-08-30 21:53 +0000 [r2984-2985] Kevin P. Fleming <kpfleming@digium.com>
* ppp/Makefile, ppp (added), ppp/zaptel.c, /: Merged revisions 2983
via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2983
| kpfleming | 2007-08-30 16:48:55 -0500 (Thu, 30 Aug 2007) | 2
lines add a proper plugin for Zaptel support in pppd, so that it
can be used with any distro-supplied version of pppd instead of
requiring a patched copy from the Digium download site ........
* wct4xxp/base.c: don't know how this was missed when i upgraded
the interrupt flags before...
2007-08-30 17:18 +0000 [r2977-2980] Russell Bryant <russell@digium.com>
* wctdm24xxp/base.c: remove an unnecessary memset of the global
ifaces array on module init
* wctdm.c: Remove some code that could never be executed. Instead
of fixing the if statement, I just removed it. The contents of
this global array are guaranteed to be zeroed out for us on load.
2007-08-28 18:48 +0000 [r2971-2972] Matthew Fredrickson <creslin@digium.com>
* patlooptest.c: Revert the patlooptest changes
* Makefile, patlooptest.c: Make sure the target name is not the
same as the directory name. Thanks Josh :-)
2007-08-28 17:53 +0000 [r2967-2969] Russell Bryant <russell@digium.com>
* zonedata.c: fix index for ru tones. Thanks to Malcolm for
pointing this out.
* zonedata.c: Add Russian tones. (issue #7953, hanabana)
2007-08-27 21:42 +0000 [r2963] Jason Parker <jparker@digium.com>
* Makefile, /: Merged revisions 2962 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2962
| qwell | 2007-08-27 16:38:48 -0500 (Mon, 27 Aug 2007) | 3 lines
Make sure we build the static version of libtonezone (and as a
side-effect, all of the programs) with -fPIC ........
2007-08-27 07:15 +0000 [r2952-2961] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* Makefile, /: Enact the init.d script when not installing to a
DESTDIR. Merged revisions 2960 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
* xpp/Makefile: Reduce the noise when building xpp/ .
* Makefile: * Skip cleaning modules if KSRC is not defined: it is
optional if you build userspace alone ("make programs"). * Pass
HOTPLUG_FIRMWARE explicitly to kernel 2.6 makefile. This is to
help eventually remove .EXPORT_ALL_VARIABLES from Makefile.
* Makefile: What is -O4 anyway?
* Makefile: Allow 'make clean' to work without a valid KSRC (for
those building just 'programs').
* zaptel.sysconfig: In theory there should be no editing of the
init.d script needed. So document how we can configure it without
editing.
* zaptel.init: zaptel.init: Allow passing extra arguments (e.g.: -c
conffig) to ztcfg.
* zconfig.h: Enable the sync tick patch.
* Makefile: Do install the hdlc network interface script.
2007-08-24 20:47 +0000 [r2950] Jason Parker <jparker@digium.com>
* /, Makefile.kernel26: Merged revisions 2949 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 (closes issue
#10555) ........ r2949 | qwell | 2007-08-24 15:46:20 -0500 (Fri,
24 Aug 2007) | 4 lines Fix an issue that caused only MG2 and
possibly HPEC to work. Issue 10555, patch by me. ........
2007-08-24 19:41 +0000 [r2946-2948] Matthew Fredrickson <creslin@digium.com>
* wct4xxp/base.c: Let's not exclusive framer interrupts by default
* zaptel-base.c: More backport code
* wct4xxp/base.c, zaptel.h, wct4xxp/wct4xxp.h: Beginning backport
of trunk to 1.4
2007-08-23 16:42 +0000 [r2941] Matthew Fredrickson <creslin@digium.com>
* wctdm.c, wctdm24xxp/base.c, /: Merged revisions 2940 via svnmerge
from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........
r2940 | mattf | 2007-08-23 11:41:36 -0500 (Thu, 23 Aug 2007) | 1
line Increase CWCID reliability on analog modules significantly.
(although if you have problems with pulse dialing on high REN
loads, see the comment to revert the value back to its previous
value). Thanks Kinsey and Rick. ........
2007-08-22 21:02 +0000 [r2934-2937] Jason Parker <jparker@digium.com>
* /, zaptel-base.c: Merged revisions 2936 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2936
| qwell | 2007-08-22 16:01:14 -0500 (Wed, 22 Aug 2007) | 6 lines
Don't try to create devices 250 and above in udev. Closes issue
10522, fix found by me (but I'm not going to take credit for the
code, since it already existed in trunk for some reason) ........
* Makefile: Reverse logic which checks for existing zaptel.conf
Issue 10527, reported by arcivanov.
2007-08-21 Matthew Fredrickson <creslin@digium.com>
* Zaptel 1.4.5.1 released.
2007-08-21 18:42 +0000 [r2922-2924] Matthew Fredrickson <creslin@digium.com>
* wctdm24xxp/GpakCust.h, wctdm24xxp/wctdm24xxp.h,
wctdm24xxp/base.c, /, wctdm24xxp/GpakCust.c: Merged revisions
2923 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2923
| mattf | 2007-08-21 13:40:23 -0500 (Tue, 21 Aug 2007) | 1 line
Allow wctdm24xxp to compile on a 2.4 based kernel ........
* Makefile: Add some 2.4 Makefile trickery for wctdm24xxp
2007-08-21 16:49 +0000 [r2920] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/xbus-core.c, /: Fix building on kernel 2.6.23rc1, from Axel
Thimm (xpp r4523). Merged revisions 2919 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
2007-08-21 15:02 +0000 [r2917] Russell Bryant <russell@digium.com>
* firmware/Makefile: change ftp to downloads
2007-08-21 08:21 +0000 [r2911-2915] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* fxotune.c, /: * Add an explicit mode to the callto open (the
default one that is used anyway). * Clarify error message. closes
#10505 on Zaptel 1.4. Merged revisions 2914 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2
* /, zaptel.init: * Set maximal zaptel udev timeout to 20 seconds.
* Allow overriding it from cwrcconfconfig file (and explain how).
(From trunk r2909 - got accidentally commited there first).
Merged revisions 2910 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2
2007-08-19 12:12 +0000 [r2905-2907] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* /, xpp/README.Astribank: Fix README.Astribank with asciidoc
8.2.2: make "underlining" more strict. (xpp r4519) Merged
revisions 2906 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2
* Makefile, /: * Fix Makefile typo in 'install-progrms:' (Thanks,
Mark Purcell). * Rename the generated xpp/README.html to
xpp/README.Astribank.html to provide a unique basename among docs
(helps debian packaging).
2007-08-17 Matthew Fredrickson <creslin@digium.com>
* Zaptel 1.4.5 released.
2007-08-17 18:13 +0000 [r2866-2881] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* /, build_tools/install_prereq: install_prereq: Don't install
packages twice. Merged revisions 2880 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2
* /: An 1.2-specific fix.
* Makefile, README, /: * programs and install-programs are now for
all of userspace. Added the target 'utils' for what 'programs'
used to be. * tonezone.h is installed with install-libs, not
install-include . * Document this. * Document some other
variations on 'make' and 'make install'. * Improve documentation
of /proc/zaptel . * Ignoring some more utilities.
* /: No need to merge those changes - the implementation in 1.4 is
different.
* Makefile, makeopts.in: Get LDFLAGS and CFLAGS from autoconf. Make
sure that they get everywhere.
* Makefile: Build menuselect with the HOSTCC.
* xpp/xpp_zap.c, xpp/.version,
xpp/utils/zconf/Zaptel/Config/Defaults.pm, xpp/card_fxo.c,
xpp/xbus-sysfs.c, xpp/xpp_zap.h, xpp/card_global.c,
xpp/card_fxs.c, xpp/README.Astribank, xpp/xproto.c, xpp/xpd.h,
xpp/card_bri.c, xpp/zap_debug.h, xpp/ChangeLog, xpp/xbus-core.c,
/, zaptel.sysconfig, xpp/utils/genzaptelconf, xpp/xpp_usb.c: xpp
rev. 4515: * BRI improvement: an 'nt_keepalive' parameter to
xpd_bri forces a BRI_NT to retry a connection indefinitely (this
is our default). When false it revert to the behaviour in
changeset:4415 ("Bezeq like") * Improvement in DBG macros. The
print_dbg parameter is now set of flags to debug. They are
defined in zap_debug.h * Don't use Astribanks connected to USB1
interfaces Unless the user set the option usb1=1 for xpp_usb
(r4504). * And some more documentation... * Include some of our
variables in the default zaptel sample file. Merged revisions
2860 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2
2007-08-16 20:48 +0000 [r2858-2865] Matthew Fredrickson <creslin@digium.com>
* wcte12xp.c, /: Merged revisions 2864 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2864
| mattf | 2007-08-16 15:47:46 -0500 (Thu, 16 Aug 2007) | 1 line
Make sure we enable MRM ........
* /, wctdm24xxp/GpakApi.c: Merged revisions 2861 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2861
| mattf | 2007-08-16 15:10:03 -0500 (Thu, 16 Aug 2007) | 1 line
Remove some unused variables from compilation ........
* wcte12xp.c, wctdm24xxp/base.c, /: Merged revisions 2857 via
svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2
........ r2857 | mattf | 2007-08-16 15:02:58 -0500 (Thu, 16 Aug
2007) | 1 line Fix for when voicebus based cards stop taking
interrupts on some systems ........
2007-08-16 18:39 +0000 [r2855] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* Makefile, /, xpp: * Add a rule for generating xpp/README.html
(not used by default). * Ignore it, and clean it and README.html
. Merged revisions 2850 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2
2007-08-16 17:05 +0000 [r2853] Matthew Fredrickson <creslin@digium.com>
* wctdm24xxp/base.c, /: Merged revisions 2852 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2852
| mattf | 2007-08-16 12:01:18 -0500 (Thu, 16 Aug 2007) | 1 line
Make sure the gain adjustment is only done if the VPM100M is
present ........
2007-08-16 13:32 +0000 [r2849] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* Makefile: Break install target, as in 1.2: * Provide separate
programs and libs targets , and provide separate
install-programs, install-libs , install-includes and
install-modules. * DESTDIR should work. INSTALL_PREFIX was
removed, as it was ambigious. Use the vaiable 'prefix' to
override /usr . * Print a message at the end of the install
target. * Convert shell logic in targets to make logic. * Still
not sure install-libs and install-includes are really needed. *
Use includedir, mandir and libdir (but not sbindir) from
configure. * Install Man pages and utils according to those
selected by the user.
2007-08-15 22:12 +0000 [r2842-2847] Matthew Fredrickson <creslin@digium.com>
* ztdynamic.c: Fix for 8277. Inproper alarm handling on dynamic
spans
* Makefile: Make sure that the URL is REALLY up to date
* Makefile: Make sure we use the new ftp.digium.com
2007-08-15 14:26 +0000 [r2833-2839] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* Makefile, README, /, Makefile.kernel26, zconfig.h: * Allow
setting the echo canceller from the Makefile or the environment
(needed for overriding the default EC in Debian m-a builds) *
Allow specifiying extra modules in the make command line:
MODULES_EXTRA and SUBDIRS_EXTRA Merged revisions 2838 via
svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2
* /, Makefile.kernel26: Fix building on older CentOS 4 and Trixbox.
Merged revisions 2836 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2
* xpp/.version, xpp/ChangeLog, /, xpp/README.Astribank,
xpp/card_fxs.c, xpp/xproto.c: Merging a few small changes Xorcom:
* Marked with no. 4416, to note that major changes after 4415
were note merged yet. * Demote the messages about PCM in non-PCM
from notice to debug (r4501). * Fix sample BRI zapata.conf: NT
instead of TE (r4498). * Disable FXS hardware DTMF detection by
default (r4492). Merged revisions 2832 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2
2007-08-10 21:58 +0000 [r2830] Matthew Fredrickson <creslin@digium.com>
* wctdm24xxp/base.c, /: Merged revisions 2829 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2829
| mattf | 2007-08-10 16:54:56 -0500 (Fri, 10 Aug 2007) | 1 line
Make sure we permit MRM commands ........
2007-08-06 20:31 +0000 [r2821-2824] Jason Parker <jparker@digium.com>
* Makefile: Use host compiler to build gendigits Issue 10255,
initial patch by mirabilos, modified by me to work with 1.4.
* zaptel.h: Include some headers from the target system rather than
the build system. Issue 10254, patch by mirabilos
2007-08-05 12:31 +0000 [r2819] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* /, xpp/utils/zconf/Zaptel/Hardware/PCI.pm: Extra Zaptel PCI IDs
(from Philipp Kempgen). From Xorcom r4466. Merged revisions 2818
via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2
2007-08-01 22:41 +0000 [r2812] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/xpp_zap.c, xpp/.version, xpp/firmwares/FPGA_1141.hex,
xpp/card_fxo.c, xpp/firmwares/FPGA_1151.hex, xpp/xpp_zap.h,
xpp/xbus-sysfs.c (added), xpp/card_fxs.c, xpp/xproto.c,
xpp/utils/Makefile, xpp/Makefile, xpp/firmwares/FPGA_FXS.hex,
xpp/card_global.h, xpp/xpd.h, xpp/xproto.h, xpp/zap_debug.h,
xpp/card_bri.c, xpp/ChangeLog, xpp/xbus-core.c, /,
xpp/utils/xpp_fxloader, xpp/xbus-core.h, xpp/utils/astribank_hook
(added), xpp/utils/xpp.rules, xpp/xpp_usb.c: xpp.r4415: * Show
Astribank 6+2 as 6/2 channels and not 8/8 channels. - Added as a
"subtype" to the device type (r4391). * Fixed a panic in BRI span
shutdown method (r4393). * Changes to debug macros. * Add proper
sysfs support (r4406) - A bus on whuch all of the Astribanks
reside. - Replaces useless sysfs code that existed in the module.
- Currently used to set the sync source automatically at device
adition / removal. * BRI: We do need the T1 timer in NT. If it
gets into G2 state (rr4407). Merged revisions 2811 via svnmerge
from https://origsvn.digium.com/svn/zaptel/branches/1.2
2007-08-01 20:21 +0000 [r2809] Jason Parker <jparker@digium.com>
* /, zaptel-base.c: Merged revisions 2808 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2808
| qwell | 2007-08-01 15:21:04 -0500 (Wed, 01 Aug 2007) | 2 lines
Per Matt Fredrickson, we don't want to use GFP_KERNEL while
holding a spinlock. ........
2007-08-01 00:15 +0000 [r2806-2807] Jim Dixon <telesistant@hotmail.com>
* pciradio.c: Merged back in some changes I wasnt aware of
* pciradio.c: Much newer and improved version of pciradio driver
2007-07-30 17:23 +0000 [r2802] Jason Parker <jparker@digium.com>
* /, hpec/hpec_zaptel.h: Merged revisions 2251 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2251
| kpfleming | 2007-02-28 14:44:28 -0600 (Wed, 28 Feb 2007) | 2
lines allow the HPEC to work even if echotraining has been
requested (the HPEC doesn't do echotraining, but it shouldn't
fail just because the user asked for it) ........
2007-07-29 00:39 +0000 [r2797] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* /, wctdm24xxp, xpp/utils: * Ignore generated files on the new
wctdm24xxp dir. (from 1.2 r2796) * Ignore two extra man pages on
xpp/utils .
2007-07-27 21:56 +0000 [r2790] Jason Parker <jparker@digium.com>
* /: Blocked revisions 2789 via svnmerge ........ r2789 | qwell |
2007-07-27 16:55:56 -0500 (Fri, 27 Jul 2007) | 3 lines Rearrange
and add some Makefile targets to be in line with the original
intentions of the addition of targets such as install-programs.
........
2007-07-27 19:36 +0000 [r2782-2787] Matthew Fredrickson <creslin@digium.com>
* fxotune.c: Quick fix for the could not fill input buffer problem
* wctdm24xxp/base.c, /: Merged revisions 2781 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2781
| mattf | 2007-07-27 14:02:28 -0500 (Fri, 27 Jul 2007) | 1 line
Minor message removal ........
2007-07-24 18:02 +0000 [r2776] Joshua Colp <jcolp@digium.com>
* firmware/Makefile, wctdm24xxp/VPMADT032.bin (removed),
wctdm24xxp/Makefile, wctdm24xxp/Makefile.kernel26: Add support
for building the firmware for the wctdm24xxp driver as an object
using the new firmware system.
2007-07-22 17:46 +0000 [r2772] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* Makefile: Revert initd config file installation to the greeddy
one of before zaptel 1.2.19/1.4.4 - install on both
/etc/default/zaptel and /etc/sysconfig/zaptel . Closes 0010257 .
(From branches/1.2 r2771)
2007-07-20 22:57 +0000 [r2762-2769] Matthew Fredrickson <creslin@digium.com>
* firmware/Makefile, wctdm24xxp/base.c, firmware/firmware.xml: Make
sure we use the new firmware interface
* wctdm24xxp/base.c, /: Merged revisions 2765 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2765
| mattf | 2007-07-20 14:17:25 -0500 (Fri, 20 Jul 2007) | 1 line
Add new 2.6.22 api updates ........
* Makefile, wctdm24xxp/base.c, wctdm24xxp/GpakApi.c,
wctdm24xxp/gpakenum.h, wctdm24xxp (added), wctdm24xxp/GpakApi.h,
wctdm24xxp/GpakCust.c, wctdm24xxp/Makefile.kernel26,
wctdm24xxp/gpakErrs.h, zaptel-base.c, wctdm24xxp/GpakCust.h,
wctdm24xxp/GpakHpi.h, wctdm24xxp/wctdm24xxp.h, /,
wctdm24xxp/Makefile, wctdm24xxp.c (removed): Merged revisions
2761 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2761
| mattf | 2007-07-20 11:19:47 -0500 (Fri, 20 Jul 2007) | 1 line
New product support, new echo canceler and new boards ........
2007-07-19 09:16 +0000 [r2759] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/utils/Makefile: * Generate list of Zaptel Modules directories
automatically. * Evaluate PERLLIBDIR only once. Closes: #10223
(Xorcom changeset:4379, from 1.2 r2758)
2007-07-19 02:07 +0000 [r2753-2757] Kevin P. Fleming <kpfleming@digium.com>
* ztdummy.c, pciradio.c, wct4xxp/base.c, wcte11xp.c, wcte12xp.c,
wct1xxp.c, wctc4xxp/base.c, wctdm.c, /, torisa.c, wctdm24xxp.c,
zaptel.h, tor2.c, wcfxo.c: Merged revisions 2756 via svnmerge
from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........
r2756 | kpfleming | 2007-07-18 21:05:03 -0500 (Wed, 18 Jul 2007)
| 2 lines update to 2.6.22 request_irq() flags ........
* wcte12xp.c, wctc4xxp/base.c, /, wctdm24xxp.c: Merged revisions
2754 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2754
| kpfleming | 2007-07-18 20:21:25 -0500 (Wed, 18 Jul 2007) | 2
lines convert a few drivers over to current PCI module
registration function ........
* /, zaptel-base.c: Merged revisions 2752 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2752
| kpfleming | 2007-07-18 20:02:53 -0500 (Wed, 18 Jul 2007) | 2
lines don't try to timeslot-interchange channels that are being
bridged (DACS) if either channel has a txgain or rxgain
specified, since that gain won't be applied any longer if the
DACS is put into effect ........
2007-07-18 16:27 +0000 [r2751] Joshua Colp <jcolp@digium.com>
* /: Blocked revisions 2750 via svnmerge ........ r2750 | file |
2007-07-18 13:27:04 -0300 (Wed, 18 Jul 2007) | 2 lines A
distribution may have multiple directories for firmware and
without knowing the proper one we have to copy the firmware into
each. We can't just copy it into the first one found. ........
2007-07-16 Russell Bryant <russell@digium.com>
* Zaptel 1.4.4 released.
2007-07-16 13:14 +0000 [r2740] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* zaptel.init: Simplify hpec_start and remove duplicates.
2007-07-13 08:22 +0000 [r2733-2736] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/xpp_zap.c, xpp/utils/zconf/Zaptel/Config/Defaults.pm,
xpp/firmwares/FPGA_1151.hex, xpp/README.metering (added),
xpp/xpp_zap.h, xpp/xproto.c, xpp/firmwares/FPGA_FXS.hex,
xpp/firmwares/USB_1130.hex, xpp/xpd.h,
xpp/firmwares/USB_1150.hex, xpp/xproto.h,
xpp/utils/zconf/Zaptel/Config (added),
xpp/utils/zconf/Zaptel/Chans.pm, xpp/utils/xpp_blink,
xpp/card_bri.c, xpp/ChangeLog, xpp/xbus-core.c,
xpp/utils/fpga_load.c, xpp/xbus-core.h, xpp/utils/lszaptel,
xpp/xdefs.h, xpp/utils/xpp.rules, xpp/utils/zapconf,
xpp/utils/zconf/Zaptel/Hardware/PCI.pm, xpp/utils/xpp_sync,
xpp/.version, xpp/firmwares/FPGA_1141.hex, xpp/card_fxo.c,
xpp/card_global.c, xpp/README.Astribank, xpp/card_fxs.c,
xpp/utils/zaptel_hardware, xpp/Makefile, xpp/utils/Makefile,
xpp/card_global.h, xpp/firmwares/USB_1140.hex,
xpp/init_card_3_26, xpp/utils/zconf/Zaptel/Hardware.pm,
xpp/utils/zt_registration, xpp/utils/zconf/Zaptel/Span.pm,
xpp/utils/genzaptelconf, xpp/xpp_usb.c: Merge xpp r4372: * Update
to zaptel-1.2.18 and zaptel-1.4.3 (r4308 onward) * Fix a critical
race with zaptel synchronization (r4362) * Added a /proc/xpp/cmds
for statistics about command timing (r4360) * Fix a digit mapping
bug with hardware dtmf detection (r4357) * In xpp/utils/Makefile
add perl syntax checks to our scripts (r4337) * Better USB data
error checking (r4336) * udev rules (xpp.rules) avoid false calls
from wrong nodes (r4331) * Improve hardware detection and
reporting in lszaptel, zaptel_hardware. zapconf is basically
functional. * Leds are blinked synchronously on all Astribanks
now (r4262) * Fix a BRI bug if OPTIMIZE_CHANMUTE was compiled
into zaptel (r4258) (This feature was not yet accepted into
official zaptel) * Removed compile warning about HZ != 1000
(r4218) * Firmware updates. * fpga_load now supports USB pathes
without zeros (r4211) * XPD numbers have changed to
'<Unit><Subunit>' (r4196) * Proper support for ZT_VMWI ioctl, if
used in zaptel (r4092) * Fix FXO power denial detection (r4054) *
FXO could accidentally go off-hook with some compilers (r4048)
(From branches/1.2 r2732, r2735)
* Makefile: * config target: Replace shell scriptary with makefile
logic. * config target: Add a helpful text for the Zaptel
installer. (From branches/1.2 r2729)
* README, build_tools/install_prereq (added): Add a script to
install build requirements. This was after the instructions on
which kernel to install on CentOS became a manual script with
if-s and case-s. Should work on Debian and CentOS. (From
branches/1.2 r2728, r2730)
2007-07-11 19:04 +0000 [r2726] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* build_tools/genmodconf: * Use shell, rather than
shell-in-makefile syntax. * Supress ugly text when
/lib/modules/`uname -r` doesn't exist (but we build for a
different kernel) (From branches/1.2 r2724)
2007-07-11 18:14 +0000 [r2718-2722] Jason Parker <jparker@digium.com>
* README, /: Merged revisions 2721 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2721
| qwell | 2007-07-11 13:14:11 -0500 (Wed, 11 Jul 2007) | 4 lines
tzafrir pointed out that this was put in the wrong place. Move it
so that asciidoc can properly parse it. ........
* README, /: Merged revisions 2717 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2717
| qwell | 2007-07-11 12:24:21 -0500 (Wed, 11 Jul 2007) | 7 lines
On some systems, sudo does not automatically add the PATH for
root, so things like /sbin may not be in there, which means
chkconfig may not be found. Add a note stating this. Issue 10181.
........
2007-07-11 13:08 +0000 [r2711-2714] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* README: Fix the zaptel-perl install insturctions.
* README.Linux26 (removed): Remove obsolete and inaccurate
README.Linux26 .
* README, /, zaptel.init, xpp/utils/Makefile: * Enable zaptel-perl
and use perl utilities for Astribank init (from 1.2 r2710) *
Update README accordingly. * Continue documenting Zaptel, while
we're updating the README. * Ignore the generated README.html.
2007-07-08 19:22 +0000 [r2706-2707] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* README: Moving specific commands to a distro-specific part.
* Makefile, README: * README fixes. * Add makefile target to
generate README.html from README with asciidoc. Note: At least
for now the ability to generate a nice extra HTML copy of the
text README is an extra feature. But the README file is meant to
be primarily read as a text file and will still be readable as
such till further notice.
2007-07-06 23:24 +0000 [r2703] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* README: Two more sections to the README. Though I'm not quite
happy with their style.
2007-07-05 18:10 +0000 [r2697] Jason Parker <jparker@digium.com>
* /, zaptel-base.c: Merged revisions 2696 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2696
| qwell | 2007-07-05 13:08:53 -0500 (Thu, 05 Jul 2007) | 5 lines
Do not report channels in ZT_STATE_KEWL or ZT_STATE_AFTERKEWL
(ie; battery drop) states as available. This becomes more likely
if ZT_KEWLTIME or ZT_AFTERKEWLTIME are set to higher values.
Issue 7612, patch by rbraun. ........
2007-07-04 19:06 +0000 [r2688-2690] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* zaptel.init: Bourne shell scripts should not use >& . dash
doesn't support it. And all of them simply supressed errors, so
they were replaced with 2> /dev/null . (from branches/1.2 r2689)
* zaptel.init: Set default value for XPP_SYNC.
2007-07-03 18:58 +0000 [r2684] Jason Parker <jparker@digium.com>
* wctdm.c, /: Merged revisions 2683 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2683
| qwell | 2007-07-03 13:57:42 -0500 (Tue, 03 Jul 2007) | 4 lines
Fix a potential issue with the reversepolarity module option in
wctdm. Issue 7191, patch by Thomas Andrews. ........
2007-07-03 16:46 +0000 [r2681] Matthew Fredrickson <creslin@digium.com>
* wct4xxp/base.c, /: Merged revisions 2680 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2680
| mattf | 2007-07-03 11:39:34 -0500 (Tue, 03 Jul 2007) | 1 line
Fix for span shutdown issue ........
2007-07-02 15:58 +0000 [r2676] Joshua Colp <jcolp@digium.com>
* /, ztd-eth.c: Merged revisions 2675 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2675
| file | 2007-07-02 12:56:18 -0300 (Mon, 02 Jul 2007) | 2 lines
Add support for the 2.6.22 kernel. (issue #10095 reported by
Matti) ........
2007-07-02 15:07 +0000 [r2674] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* zaptel.init: * Fix unloading of xpp modules. * Add optional
support for using the zaptel perl functions. (From branches/1.2
changesset:2670 and changeset:2673)
2007-07-02 13:46 +0000 [r2671] Joshua Colp <jcolp@digium.com>
* firmware/Makefile, wctc4xxp/tc400m-firmware.bin (removed),
wctc4xxp/base.c, wctc4xxp/Makefile.kernel26: Nobody ever updated
the wctc4xxp stuff to use the in-tree firmware management
stuff... 'tsk 'tsk. (issue #10093 reported by snuffy)
2007-06-26 19:37 +0000 [r2669] Kevin P. Fleming <kpfleming@digium.com>
* /: block fix that is not needed here (already present)
2007-06-23 15:55 +0000 [r2664] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* README: * Correct names for Digium cards. * Further removed
obsolete sections. * Section about the perl stuff added.
2007-06-21 13:37 +0000 [r2657-2662] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* README: A README that will actually help users a bit.
* zaptel.init: * Remove ztcfg -s from shutdown. * Someone with a
dynamic span, please test the suggested replacement (remmed-out).
* Reduced nesting in wait_for_xpp .
* zaptel.init: Reduce nesting in hpec startup by moving it to a
function.
* zaptel.init: Fix a syntax error in hpec startup.
* xpp/utils: Ignore some generated man pages.
2007-06-12 14:50 +0000 [r2643-2645] John Sloan <jsloan@digium.com>
* wctc4xxp/base.c, /: Merged revisions 2644 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2644
| jsloan | 2007-06-12 09:07:18 -0500 (Tue, 12 Jun 2007) | 1 line
Corrected test code ........
* wctc4xxp/base.c, /: Merged revisions 2642 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2642
| jsloan | 2007-06-12 08:34:42 -0500 (Tue, 12 Jun 2007) | 1 line
Added new PCI device ID ........
2007-06-11 22:18 +0000 [r2639] Matthew Fredrickson <creslin@digium.com>
* wct4xxp/base.c, /: Merged revisions 2638 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2638
| mattf | 2007-06-11 17:17:14 -0500 (Mon, 11 Jun 2007) | 1 line
Add a couple of PCI ids ........
2007-06-11 22:12 +0000 [r2635] Jason Parker <jparker@digium.com>
* genconst.c (removed): Remove a file from the tree that hasn't
been used in a very long time. The last time this file changed
was in revision 79. It is also not referenced anywhere in the
tree, and doesn't even compile... Issue 9923, reported by
tzafrir.
2007-06-11 22:12 +0000 [r2634] Matthew Fredrickson <creslin@digium.com>
* wct4xxp/base.c, /: Merged revisions 2633 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2633
| mattf | 2007-06-11 17:10:59 -0500 (Mon, 11 Jun 2007) | 1 line
Make the version check optional ........
2007-06-11 15:55 +0000 [r2622] John Sloan <jsloan@digium.com>
* wctc4xxp/base.c, /: Merged revisions 2621 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2621
| jsloan | 2007-06-11 10:47:37 -0500 (Mon, 11 Jun 2007) | 1 line
Fixed SMP bugs on quad processor machines. Reduced memory usage
........
2007-06-09 23:55 +0000 [r2611-2612] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* doc/ztmonitor.8, doc/zttool.8, doc/ztcfg.8: ó is non-printable on
non-UTF-8 locales. Replaced with \['o] to make lintian happy.
* doc/fxstest.8 (added), doc/fxotune.8: * fxotune man page is
up-to-date for 1.4. * fxtest man page.
2007-06-08 Russell Bryant <russell@digium.com>
* Zaptel 1.4.3 released.
2007-06-08 15:58 +0000 [r2601] Russell Bryant <russell@digium.com>
* wct4xxp/base.c, /: Merged revisions 2599 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2599
| russell | 2007-06-08 10:57:18 -0500 (Fri, 08 Jun 2007) | 1 line
Make sure the name is right ........
2007-06-08 15:37 +0000 [r2591-2597] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* Makefile: Make the checkstack target basically work for kernel
2.6.
* xpp/card_fxo.c, xpp/utils/xpp_fxloader: Some XPP bugfixes: * Fix
FXO power denial detection (changeset:4054) * Incorrect data type
could cause FXO module to go off-hook (changeset:4048) *
xpp_fxloader: fix the error message when you want to disable *
automatic firmware loading... (changeset:4060) Merged from
branches/1.2 r2589
2007-06-07 17:02 +0000 [r2584] Russell Bryant <russell@digium.com>
* /: Blocked revisions 2583 via svnmerge ........ r2583 | russell |
2007-06-07 12:01:04 -0500 (Thu, 07 Jun 2007) | 4 lines The -quit
option to find is not supported on the version of find installed
on Centos 4. Lame! Just remove it, as it isn't really necessary.
(issue #9800, noahisaac) ........
2007-06-06 13:47 +0000 [r2574] Matthew Fredrickson <creslin@digium.com>
* wct4xxp/base.c: Add 220/420 support
2007-06-01 17:06 +0000 [r2551] Matthew Fredrickson <creslin@digium.com>
* wct4xxp/vpm450m.c, /: Merged revisions 2550 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2550
| mattf | 2007-06-01 11:56:09 -0500 (Fri, 01 Jun 2007) | 2 lines
Fix for stack overflow on FC6 and VPM450M. ........
2007-05-18 15:50 +0000 [r2540] Matthew Fredrickson <creslin@digium.com>
* /, zaptel-base.c: Merged revisions 2539 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2539
| mattf | 2007-05-18 10:48:55 -0500 (Fri, 18 May 2007) | 2 lines
Remove silly got signal message ........
2007-05-17 21:47 +0000 [r2536] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/xpp_zap.c, xpp/firmwares/FPGA_1151.hex,
xpp/utils/zconf/Zaptel/Hardware (added),
xpp/firmwares/FPGA_FXS.hex, xpp/xpd.h,
xpp/utils/zconf/Zaptel/Chans.pm, xpp/card_bri.c, xpp/ChangeLog,
xpp/xbus-core.c, xpp/init_card_6_26, xpp/utils/zconf/Zaptel.pm,
xpp/utils/zconf/Zaptel/Xpp/Xpd.pm, xpp/utils/lszaptel,
xpp/utils/xpp.rules, xpp/utils/zapconf (added),
xpp/utils/zconf/Zaptel/Hardware/PCI.pm, xpp/utils/xpp_sync,
xpp/.version, xpp/firmwares/FPGA_1141.hex, xpp/README.Astribank,
xpp/card_global.c, xpp/utils/zaptel_hardware (added),
xpp/Makefile, xpp/utils/Makefile, xpp/parport_debug.c (added),
xpp/utils/zconf/Zaptel/Hardware/USB.pm,
xpp/utils/zconf/Zaptel/Xpp/Xbus.pm, xpp/parport_debug.h (added),
xpp/utils/zconf/Zaptel/Hardware.pm (added),
xpp/utils/zt_registration, xpp/init_card_7_26,
xpp/utils/zconf/Zaptel/Span.pm, xpp/utils/genzaptelconf,
xpp/utils/zconf/Zaptel/Xpp.pm, xpp/xpp_usb.c: XPP revision 3965:
* Tested with zaptel-1.2.17.1 * Add D-Channel TX, RX and BAD
frames count in /proc/xpp/XBUS-*/XPD-*/bri_info * Adjust output
of xpp_sync script. Pad for 8 port BRI. * Added a debugging
module parport_debug (not compiled by default). * Added an
optional patch to zaptel: - compiles only if ZAPTEL_SYNC_TICK is
defined - Allow interested driver to register for "sync"
notification. - Does not affect drivers that do not use this
feature. * Added external synchronization feature: - Only if
ZAPTEL_SYNC_TICK feature is compiled in - Than XPP may be
synchronized by another card (e.g: an Astribank with FXS can be
synchronized by a Digium PRI card). - May be enabled/disabled in
runtime via the 'sync_tick_active' module parameter to the xpp.ko
module. * Fixed a potential bug in D-Channel hexdump printing. *
New visual indications in BRI leds: - Constant ON RED/GREEN:
Shows the port type -- NT/TE. - Very fast "double blink": Layer1
work, no D-Channel yet. - Steady blinking (1/2 sec): D-Channel
trafic detected. * xpp_fxloader moved to /usr/share/zaptel . *
adj_clock removed: never really used. * Now we have
Zaptel::Hardware and a sample zaptel_hardware script (not
(installed by default). * We also have a sample perl zapconf (not
installed by default) which aims at replacing genzaptelconf (sans
the modules detection).
2007-05-17 20:35 +0000 [r2532] Matthew Fredrickson <creslin@digium.com>
* wct4xxp/vpm450m.c: Reduce stack usage of VPM450M. Fix for FC6
module load problems
2007-05-17 18:46 +0000 [r2527] Jason Parker <jparker@digium.com>
* Makefile: Fix problem with chan_misdn not being built in
Asterisk, due to missing suppserv. Update to new tarballs from
misdn.org and allow versioning in Makefile. Issue 9064.
2007-05-17 16:49 +0000 [r2524] Joshua Colp <jcolp@digium.com>
* fxotune.c: Allow the fxotune config file to be specified instead
of hardcoded. (issue #8444 reported by pupeno, patch by tzafrir)
2007-05-17 14:27 +0000 [r2522] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/Makefile: The debugfs code seems to have some bad sideeffects
when badly used. So don't enable it by default. (From chabgeset
2520)
2007-05-04 22:37 +0000 [r2495] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* zaptel.init: zaptel.init: use automative modules unloading (as in
trunk and 1.2).
2007-05-01 16:22 +0000 [r2483] Russell Bryant <russell@digium.com>
* /, zonedata.c: Merged revisions 2482 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2482
| russell | 2007-05-01 11:20:50 -0500 (Tue, 01 May 2007) | 3
lines Add zonedata information for the Philippines. (issue #9525,
reported and patched by loloski) ........
2007-04-30 23:07 +0000 [r2480] Kevin P. Fleming <kpfleming@digium.com>
* zaptel.init: eliminate bogus warning message during script
startup with no HPEC licenses
2007-04-29 22:12 +0000 [r2477] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/xpp_zap.c, xpp/utils/hexfile.c, xpp/firmwares/FPGA_1151.hex,
xpp/xpp_zap.h, xpp/utils/hexfile.h, xpp/xproto.c,
xpp/firmwares/FPGA_FXS.hex, xpp/firmwares/USB_1130.hex,
xpp/xproto.h, xpp/firmwares/USB_1150.hex, xpp/xpd.h,
xpp/calibrate_slics, xpp/init_card_4_24 (removed),
xpp/utils/zconf/Zaptel/Chans.pm, xpp/init_card_6_24 (removed),
xpp/utils/xpp_blink (added), xpp/init_card_4_26 (added),
xpp/card_bri.c, xpp/ChangeLog (added), xpp/xbus-core.c,
xpp/init_card_6_26 (added), xpp/utils/zconf/Zaptel.pm,
xpp/utils/adj_clock.c (removed),
xpp/utils/zconf/Zaptel/Xpp/Xpd.pm, xpp/utils/xpp_fxloader,
xpp/utils/fpga_load.c, xpp/utils/lszaptel, xpp/utils/xpp_sync,
xpp/.version, xpp/firmwares/FPGA_1141.hex,
xpp/utils/genzaptelconf.8, xpp/card_fxo.c, xpp/README.Astribank,
xpp/card_fxs.c, xpp/card_global.c, xpp/utils/Makefile,
xpp/utils/adj_clock.8 (removed), xpp/card_global.h,
xpp/firmwares/USB_1140.hex, xpp/utils/zconf/Zaptel/Xpp/Xbus.pm,
xpp/utils/fpga_load.8, xpp/init_card_3_24 (removed),
xpp/init_card_3_26 (added), xpp/utils/zt_registration,
xpp/init_card_7_24 (removed), xpp/init_card_7_26 (added),
xpp/utils/zconf/Zaptel/Span.pm, xpp/utils/genzaptelconf,
xpp/utils/zconf/Zaptel/Xpp.pm, xpp/xpp_usb.c: xpp rev. 3814: *
Protocol no. 2.6: syncing improvements. * Support for 8-port
Astribank BRI. * Firmware unloading now works: rmmod xpp_usb;
/etc/hotplug/usb/xpp_fxloader reset * Defaults of kernel
parameters are now part of parameter description. *
World-readable kernel parameters. * No need for extra patch
beyond bristuff for Astribank BRI. * Default poll intervals
changed: 500 in BRI and FXO. * Allow changing FXS polls interval
at run time. * BRI initalization fixed on SUSE (path to logger).
* When using the SUSE zaptel rpm package, set
modules_var=ZAPTEL_MODULES in /etc/sysconfig/zaptel . *
zt_registration not verbose by default. * xpp_sync warns if FXO
is sync slave. * Fixed genzaptelconf -z (zapscan output
emulation). * PCM fixes. * Solves "multiple ticks" bug. No need
for pcm_tasklets workaround.
2007-04-28 21:29 +0000 [r2465-2470] Matthew Fredrickson <creslin@digium.com>
* wct4xxp/base.c, /: Merged revisions 2469 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2469
| mattf | 2007-04-28 16:07:35 -0500 (Sat, 28 Apr 2007) | 1 line
Fix for potential deadlock in wct4xxp driver ........
* wcte11xp.c, /: Merged revisions 2464 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2464
| mattf | 2007-04-28 14:04:50 -0500 (Sat, 28 Apr 2007) | 2 lines
Fix for potential deadlock in drivers ........
2007-04-27 19:06 +0000 [r2460] Jason Parker <jparker@digium.com>
* /, ztmonitor.c: Merged revisions 2459 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2459
| qwell | 2007-04-27 14:05:25 -0500 (Fri, 27 Apr 2007) | 2 lines
Correct and remove (one of each) broken syntax examples. ........
2007-04-25 16:32 +0000 [r2452] Matthew Fredrickson <creslin@digium.com>
* wct1xxp.c, /: Merged revisions 2451 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2451
| mattf | 2007-04-25 11:26:18 -0500 (Wed, 25 Apr 2007) | 1 line
Start fixing potential deadlock between device driver and zaptel
........
2007-04-25 Russell Bryant <russell@digium.com>
* Zaptel 1.4.2.1 released.
2007-04-25 15:36 +0000 [r2444] Jason Parker <jparker@digium.com>
* /, zaptel-base.c: Merged revisions 2443 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2443
| qwell | 2007-04-25 10:35:34 -0500 (Wed, 25 Apr 2007) | 2 lines
Don't try to reference a variable on a channel that may not
exist. ........
2007-04-24 Russell Bryant <russell@digium.com>
* Zaptel 1.4.2 released.
2007-04-24 18:34 +0000 [r2433-2435] Jason Parker <jparker@digium.com>
* /: Blocked revisions 2434 via svnmerge ........ r2434 | qwell |
2007-04-24 13:33:29 -0500 (Tue, 24 Apr 2007) | 1 line Backport
pre-echocan debugging for ztmonitor ........
* zaptel.h, zconfig.h, ztmonitor.c, jpah.h (added), zaptel-base.c:
Merge in pre-echocan debugging for ztmonitor.
2007-04-13 23:14 +0000 [r2423] Jason Parker <jparker@digium.com>
* /, zaptel-base.c: Merged revisions 2422 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2422
| qwell | 2007-04-13 18:12:23 -0500 (Fri, 13 Apr 2007) | 14 lines
Fix several places where we treat confmode as a bitmask. It is a
bitmask...sort of.. I'll explain.. confmode is used for 2
different things. It defines both the "mode" and the "flags" of
the conference. The "mode" part is in 0x00FF and is NOT bitwise.
The "flag" part is in 0xFF00 and *IS* bitwise. Confused yet?
Good. So, when we want to check the "mode" of the conference, we
need to check only within 0xFF. There were several places where
this was not happening - but due to luck, it worked (...sort of).
That's what this patch fixes. ........
2007-04-11 19:03 +0000 [r2406] Matt Frederickson <creslin@digium.com>
* /, zaptel-base.c: Merged revisions 2405 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2405
| mattf | 2007-04-11 14:01:21 -0500 (Wed, 11 Apr 2007) | 4 lines
Fix buglet in memory corruption fix. ........
2007-04-07 16:47 +0000 [r2397] Matt Frederickson <creslin@digium.com>
* zaptel-base.c: Fix for #9208. Memory corruption within zaptel
data.
2007-03-30 21:03 +0000 [r2359] Matt Frederickson <creslin@digium.com>
* zaptel-base.c: Fix potential spinlock recursion issue.
2007-03-30 18:57 +0000 [r2354] Jason Parker <jparker@digium.com>
* /, zaptel-base.c: Merged revisions 2353 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2353
| qwell | 2007-03-30 13:56:46 -0500 (Fri, 30 Mar 2007) | 4 lines
Fix an issue where an echo can was freed incorrectly in certain
circumstances. Issue 9292, fix suggested by ddv2005. ........
2007-03-29 16:36 +0000 [r2348-2351] Russell Bryant <russell@digium.com>
* README.hpec, /, zaptel.init: Merged revisions 2350 via svnmerge
from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........
r2350 | russell | 2007-03-29 11:35:37 -0500 (Thu, 29 Mar 2007) |
4 lines Trim the HPEC readme that is included in zaptel to only
include basic information as the one on the FTP site will always
be the one that contains the full up to date information. Also,
tweak some grammar in the additions to the init script. ........
* README.hpec (added), /, zaptel.init: Merged revisions 2347 via
svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2
........ r2347 | russell | 2007-03-29 11:05:32 -0500 (Thu, 29 Mar
2007) | 3 lines Add a README for HPEC, and add support for HPEC
in the init script. (issue #9413, chozian) ........
2007-03-27 18:49 +0000 [r2343] Russell Bryant <russell@digium.com>
* /, zaptel.init: Merged revisions 2342 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2342
| russell | 2007-03-27 13:48:23 -0500 (Tue, 27 Mar 2007) | 5
lines When debug is enabled, ensure that "debug=1" gets passed to
the zaptel module, and not just the hardware modules. Also, run
"ztcfg -s" at the beginning of the "stop" action of the script.
(issue #7409, PCadach and tzafrir) ........
2007-03-23 02:11 +0000 [r2336] Kevin P. Fleming <kpfleming@digium.com>
* Makefile: fix builds for 2.4 kernels
2007-03-22 Kevin P. Fleming <kpfleming@digium.com>
* Zaptel 1.4.1 released.
2007-03-23 02:11 +0000 [r2333-2336] Kevin P. Fleming <kpfleming@digium.com>
* Makefile: fix builds for 2.4 kernels
* mec.h, kb1ec.h, mec2.h, mec3.h, sec-2.h, sec.h,
hpec/hpec_zaptel.h, mg2ec.h, zaptel.h, zaptel-base.c: bring in
the rest of the support needed for HPEC
2007-03-19 16:30 +0000 [r2323] Joshua Colp <jcolp@digium.com>
* /, README.Linux26: Merged revisions 2322 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2322
| file | 2007-03-19 12:28:58 -0400 (Mon, 19 Mar 2007) | 2 lines
Update documentation to match current Makefile. linux26 is no
longer a valid target. (issue #9296 reported by valley) ........
2007-03-14 16:08 +0000 [r2308] Matt Frederickson <creslin@digium.com>
* wct4xxp/base.c, /: Merged revisions 2307 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2307
| mattf | 2007-03-14 10:03:18 -0600 (Wed, 14 Mar 2007) | 2 lines
Fix bug in J1 mode configuration. ........
2007-03-09 20:04 +0000 [r2302] Matt Frederickson <creslin@digium.com>
* wct4xxp/vpm450m.c, /: Merged revisions 2301 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2301
| mattf | 2007-03-09 13:59:43 -0600 (Fri, 09 Mar 2007) | 2 lines
Make sure we don't allocate as GFP_KERNEL in atomic context
........
2007-03-08 15:58 +0000 [r2297] Joshua Colp <jcolp@digium.com>
* /, hpec/hpec_zaptel.h: Merged revisions 2296 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2296
| file | 2007-03-08 10:56:05 -0500 (Thu, 08 Mar 2007) | 2 lines
vprintk is only available on 2.6.9+ (issue #9232 reported by
baconbuttie) ........
2007-03-08 00:48 +0000 [r2294] Russell Bryant <russell@digium.com>
* zaptel.h: Add a constant for ZT_EVENT_REMOVED to allow a driver
to hint to userspace that a channel has been removed. (issue
#7256, tzafrir)
2007-03-07 19:36 +0000 [r2292] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* Makefile: Don't die when there is no udev rules dir (on an
installtion with INSTALL_PREFIX explicitly set). r2290 | tzafrir
| 2007-03-07 21:14:30 +0200 (Wed, 07 Mar 2007) | 3 lines
2007-03-05 17:02 +0000 [r2288] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* /, xpp/xpd.h: Found a proper "marker" for the gfp_t typedef. Now
every 2.6.9 is supported. r2286 | tzafrir | 2007-03-05 18:14:11
+0200 (Mon, 05 Mar 2007) | 2 lines
2007-03-05 05:42 +0000 [r2283] Kevin P. Fleming <kpfleming@digium.com>
* build_tools/make_firmware_object, wcte12xp.c, /: Merged revisions
2280-2282 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2280
| kpfleming | 2007-03-04 23:34:43 -0600 (Sun, 04 Mar 2007) | 2
lines ensure that we run objdump in the most generic language
possible to avoid complications on non-English systems (issue
#9196) ........ r2281 | kpfleming | 2007-03-04 23:40:37 -0600
(Sun, 04 Mar 2007) | 2 lines remove stray character that my
editor decided to add ........ r2282 | kpfleming | 2007-03-04
23:41:30 -0600 (Sun, 04 Mar 2007) | 2 lines this driver does not
use workqueues, so does not need this header (issue #9196)
........
2007-03-02 22:20 +0000 [r2267-2273] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* zaptel.init: Support proper loading of the Astribank (xpp) with
proper initialization.
* Makefile: Don't "fail" a modprobe of ztdummy just because
zaptel.conf is bad.
* /, xpp/Makefile: Clarify a cyptic build message. r2266 | tzafrir
| 2007-03-02 22:40:06 +0200 (Fri, 02 Mar 2007) | 2 lines
2007-03-01 19:50 +0000 [r2244-2259] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/xbus-core.c, /: r2257 | tzafrir | 2007-03-01 21:29:12 +0200
(Thu, 01 Mar 2007) | 2 lines SLAB_KERNEL is an obsolete alias of
GFP_KERNEL. Fix build on Vanilla 2.6.20 .
* /, xpp/utils/Makefile: r2252 | tzafrir | 2007-02-28 22:57:52
+0200 (Wed, 28 Feb 2007) | 3 lines Make the xpp/utils/Makefile in
1.2 closer to the one in 1.4 (and actually work, this tine).
* /: Forgot to update properties
* xpp/xpp_zap.c, xpp/utils/hexfile.c, xpp/firmwares/FPGA_1151.hex,
xpp/xpp_zap.h, xpp/utils/hexfile.h, xpp/xproto.c,
xpp/utils/zconf/Zaptel, xpp/firmwares/FPGA_FXS.hex, xpp/xproto.h,
xpp/xpd.h, xpp/firmwares/USB_1150.hex,
xpp/utils/zconf/Zaptel/Chans.pm, xpp/utils/zconf/Zaptel/Xpp,
xpp/card_bri.c (added), xpp/xbus-core.c,
xpp/utils/zconf/Zaptel.pm, xpp/utils/test_parse.c,
xpp/utils/zconf/Zaptel/Xpp/Xpd.pm, xpp/card_bri.h (added),
xpp/utils/xpp_fxloader, xpp/utils/fpga_load.c, xpp/xbus-core.h,
xpp/utils/lszaptel (added), xpp/utils/xpp_sync (added),
xpp/.version (added), xpp/firmwares/FPGA_1141.hex,
xpp/card_fxo.c, xpp/card_fxs.c, xpp/card_global.c, xpp/Makefile,
xpp/utils/Makefile, xpp/utils/zconf (added),
xpp/firmwares/USB_1140.hex, xpp/utils/zconf/Zaptel/Xpp/Xbus.pm,
xpp/utils/zt_registration (added),
xpp/utils/zconf/Zaptel/Span.pm, xpp/utils/genzaptelconf,
xpp/utils/zconf/Zaptel/Xpp.pm, xpp/xpp_usb.c: xpp rev. 3495:
------------------------------------------------------------------------
r2243 | tzafrir | 2007-02-28 02:05:59 +0200 (Wed, 28 Feb 2007) |
4 lines * xpp rev. 3495: fix a race in the FXO driver of recent
weeks. * Add the Astribank BRI driver (though still needs
bristuffed zaptel to build and thus will not build by default)
------------------------------------------------------------------------
r2239 | tzafrir | 2007-02-27 08:14:18 +0200 (Tue, 27 Feb 2007) |
18 lines Xorcom rev. 3491: * Version of xpp modules is set from
xpp/.version, rather than "unknown". * Astribank devices are now
initialized in parallel: faster startup when there are multiple
Astribanks. * Re-added support for the old format of
/proc/xpp/sync write: (echo N 0 > /proc/xpp/sync ) . The new
format (SYNC=NN) is preffered. * Firmware update to fix a PCM
issue. * Fixed a build issue with kernel 2.6.8 . * Fixed missing
initialization in Zaptel::Xpp::Xbus . * genzaptelconf will now
set FXS ports as LS by default. To set them as KS, use
fxs_default_start=ks in /etc/default/zaptel /
/etc/sysconfig/zaptel (Also a workaround for #7755 ). *
Groundwork for sync from zaptel master span: if zaptel is built
with ZAPTEL_SYNC_TIC (see zaptel/team/tzafrir/sync ), xpp will
report its drift from the zaptel sync master. * USB firmware
update: had bad lines checksums (and fxload did not report). *
fpga_load can now better report bad hex file checksum ;-) .
------------------------------------------------------------------------
r2223 | tzafrir | 2007-02-24 03:05:05 +0200 (Sat, 24 Feb 2007) |
3 lines Add the Zaptel and Zaptel::Xpp perl modules, and some
simple utilities that use them. disabled by default for now.
------------------------------------------------------------------------
r2222 | tzafrir | 2007-02-24 02:55:05 +0200 (Sat, 24 Feb 2007) |
2 lines Make the xpp/utils/Makefile in 1.2 closer to the one in
1.4 .
2007-02-26 18:20 +0000 [r2230-2233] Joshua Colp <jcolp@digium.com>
* Makefile, /: Merged revisions 2232 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2232
| file | 2007-02-26 13:18:13 -0500 (Mon, 26 Feb 2007) | 2 lines
Just in case... set hotplug firmware loading option to no if on a
2.4 kernel. (issue #9140 reported by velter) ........
* Makefile: Move menuselect build options inclusion to before it is
initially used otherwise the needed variables may not be present
at time of use. (issue #9145 reported by jmls)
2007-02-26 10:13 +0000 [r2229] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* doc/fxotune.8: The fxotune man page was misleading. Dumping some
content into it. Still needs work.
2007-02-24 00:13 +0000 [r2215-2220] Kevin P. Fleming <kpfleming@digium.com>
* datamods/Makefile, wct4xxp/Kbuild (removed), Makefile, wcte12xp.c
(added), wct4xxp/Makefile, zaptel.xml, hpec (added), zaptel.c
(removed), zttranscode.c, wctc4xxp (added), Makefile.kernel26
(added), wct4xxp/Makefile.kernel26 (added), zaptel.h,
firmware/firmware.xml, zaptel-base.c (added): partial update to
support all the stuff that went into Zaptel 1.2 recently... this
definitely still broken for 2.4 kernels, and maybe for 2.6 as
well :-) includes: Makefile split and reorganize TE120P driver
TC400B driver HPEC support (not yet complete)
2007-02-21 17:27 +0000 [r2200-2209] Matt Frederickson <creslin@digium.com>
* wct4xxp/base.c, /: Merged revisions 2208 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2208
| mattf | 2007-02-21 11:26:05 -0600 (Wed, 21 Feb 2007) | 2 lines
Make sure we do the IRQ fix in the gen1 interrupt handler as
well. ........
* wct4xxp/vpm450m.c, /: Merged revisions 2199 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2199
| mattf | 2007-02-21 09:57:20 -0600 (Wed, 21 Feb 2007) | 2 lines
Make sure we do the check for memory allocation failure. ........
* wct4xxp/vpm450m.c, /: Merged revisions 2198 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2198
| mattf | 2007-02-21 09:49:50 -0600 (Wed, 21 Feb 2007) | 2 lines
Reduce our stack usage when using the vpm450m ........
2007-02-21 14:00 +0000 [r2195] Kevin P. Fleming <kpfleming@digium.com>
* build_tools/make_svn_branch_name, /: Merged revisions 2194 via
svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2
........ r2194 | kpfleming | 2007-02-21 08:00:20 -0600 (Wed, 21
Feb 2007) | 2 lines use new tag version numbering script ........
2007-02-20 20:17 +0000 [r2180] Russell Bryant <russell@digium.com>
* Makefile: Fix the check that ran the install for xpp/utils. Also,
add a target to build them, and clean the directory in the clean
target. (issue #8894, tzafrir)
2007-02-17 17:15 +0000 [r2170] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/utils/Makefile: xpp/utils: Use autoconf's test for libusb.
2007-02-16 22:18 +0000 [r2167] Matt Frederickson <creslin@digium.com>
* /, wctdm24xxp.c: Merged revisions 2166 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2166
| mattf | 2007-02-16 16:14:48 -0600 (Fri, 16 Feb 2007) | 2 lines
Fix detection of second single port modules so it actually works
now. ........
2007-02-12 23:42 +0000 [r2158-2160] Joshua Colp <jcolp@digium.com>
* firmware/Makefile, Makefile: Add hotplug-uninstall target to main
Makefile and make the firmware Makefile keep a record of the
installed firmware in the hotplug directory. This means that as
long as you have the latest version of firmware installed your
checkout will never install it again, and all new checkouts will
not either. This might also help those building packages for
distros.
2007-02-11 15:48 +0000 [r2151] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/xbus-core.c: struct inode and debugfs: break some Fedoras
rather than all others. (from changeset 2150)
2007-02-10 20:43 +0000 [r2147] Joshua Colp <jcolp@digium.com>
* firmware/Makefile: Only attempt to install firmware to the
hotplug directories if any was selected.
2007-02-10 00:22 +0000 [r2142-2146] Kevin P. Fleming <kpfleming@digium.com>
* zaptel.xml: add some inter-module dependencies and add wctc4xxp
to menuselect list
* zaptel.xml: clean up module naming there is no need to enable the
user to skip building zaptel or ztdynamic (probably zttranscode
too... menuselect needs an upgrade)
2007-02-09 18:39 +0000 [r2136-2140] Joshua Colp <jcolp@digium.com>
* firmware/Makefile: It's probably a good idea to make the tarballs
a requirement to make the object files.
* firmware/Makefile, wct4xxp/base.c, Makefile: Drop the need for
header files by using non-versioned binary files.
2007-02-09 15:06 +0000 [r2123-2135] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* Makefile: Fix 'make clean' on kernel 2.4: datamods is only made
on 2.6.
* Makefile: Build xpp/ for kernel >= 2.6.8, not >=2.6.9.
* xpp/xpp_zap.c: Now 'chans' is used after all.
* xpp/xpp_zap.c, xpp/firmwares/FPGA_1151.hex, xpp/xpp_zap.h,
xpp/xproto.c, xpp/firmwares/FPGA_FXS.hex, xpp/xproto.h,
xpp/xpd.h, xpp/init_card_4_23 (removed), xpp/init_card_4_24
(added), xpp/init_card_6_24 (added), xpp/xbus-core.c,
xpp/utils/adj_clock.c, xpp/utils/xpp_fxloader, xpp/xbus-core.h,
xpp/utils/fpga_load.c, xpp/xdefs.h, xpp, xpp/utils/xpp.rules
(added), xpp/firmwares/FPGA_1141.hex (added), xpp/card_fxo.c,
xpp/card_global.c, xpp/card_fxs.c, xpp/README.Astribank,
xpp/utils/zaptel-helper (added), xpp/zaptel-helper (removed),
xpp/utils/Makefile, xpp/Makefile, xpp/utils/adj_clock.8,
xpp/firmwares/USB_1140.hex (added), xpp/zap_debug.c,
xpp/utils/fpga_load.8, xpp/init_card_3_23 (removed),
xpp/init_card_3_24 (added), xpp/zap_debug.h, xpp/init_card_7_24
(added), xpp/xpp_log.h (added), xpp/utils/genzaptelconf,
xpp/xpp_usb.c: Branch 1.4 is back in sync (currently: xorcom rev.
3332): * Performance improvements for multi-XPD (span) devices. *
Astribank BRI driver (in next commit). * Changes under /proc: -
XBUS and XPD numbers have two digits. - Every script wildcard
should be replaced from XBUS-? to XBUS-[0-9]* - Added
/proc/xpp/XBUS-*/XPD-*/blink: echo 1 to start and 0 to stop. *
Several countries (South Africa, UAE, anybody else) require a
shorter ring delay. Adjust FXO reg 0x17 (23)'s bits 0:2 to 011. *
Use tasklets to move most of the interrupt PCM copying out of the
interrupt. * Debugfs-based code to dump data to userspace (used
to debug BRI D channel). * Pretend every 2.6.9 actually has later
RHEL's typedefs. * fpga_load supports /dev/bus/usb . * Fixed
physical order sorting in genzaptelconf. * Reverse polarity and
power denial detection. * A short led flash at registration time.
* Add a real version of the xpp modules to them (independent of
the Zaptel version). * Update our line status even when not
registered. * Fixed a false SIG_CHANGED when inserting or
removing cable to FXO. * Fixed compilation fixes for 2.6.20 (Bug
#8982) * A cleaner fix for the bool changes of 2.6.19 . *
Automatically detect echo_can_state_t at debug time. *
Automaitcally set XPP_DEBUGFS (depending on debugfs) at compile
time. * Bug-fixes to zaptel-helper. Moved to xpp/utils . * Xbus
protocol version: 2.4 (Zaptel 1.2.12/1.4.0 had 2.3). XPS Init
scripts renamed accordingly.
2007-02-07 21:25 +0000 [r2111-2120] Kevin P. Fleming <kpfleming@digium.com>
* wct4xxp/base.c, /: Merged revisions 2119 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2119
| kpfleming | 2007-02-07 15:22:44 -0600 (Wed, 07 Feb 2007) | 2
lines don't allow wct4xxp workqueue support to be built against
kernel 2.6.20... it's not going to work ........
* Makefile, xpp/xbus-core.c, /: Merged revisions 2110 via svnmerge
from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........
r2110 | kpfleming | 2007-02-07 14:29:22 -0600 (Wed, 07 Feb 2007)
| 3 lines build XPP on the kernels that Xorcom says are OK to
build on update workqueue usage to conform to kernel 2.6.20 API
........
2007-02-07 20:01 +0000 [r2107] Joshua Colp <jcolp@digium.com>
* wct4xxp/vpm450m.c, build_tools/make_tree (added), firmware
(added), wct4xxp/base.c, Makefile, configure,
wct4xxp/OCT6114-64D.ima (removed), firmware/firmware.xml,
makeopts.in, firmware/Makefile, wct4xxp/Kbuild, zaptel.xml
(added), wct4xxp/Makefile, menuselect-tree (removed),
wct4xxp/OCT6114-128D.ima (removed), configure.ac: Merge in
zaptel-firmware branch. This basically downloads the firmware
from the FTP site and builds the appropriate headers based on the
current version. Drivers just know they need a certain firmware
and get fed the current version. If this prevents your zaptel
from building do a make distclean and start fresh or make sure
the firmware is checked in make menuselect.
2007-02-07 19:55 +0000 [r2105] Kevin P. Fleming <kpfleming@digium.com>
* /, zttranscode.c: Merged revisions 2103 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2103
| kpfleming | 2007-02-07 13:52:29 -0600 (Wed, 07 Feb 2007) | 2
lines include headers we need... new kernel releases won't do it
for us ........
2007-02-07 16:51 +0000 [r2099] Russell Bryant <russell@digium.com>
* ztcfg.c: In case the ZT_GETVERSION ioctl fails, ensure that the
buffers are initialized to "Unknown" so that we don't try to
print uninitialized string buffers. (issue #8992, Oron Peled,
tzafrir)
2007-02-05 21:55 +0000 [r2087] Kevin P. Fleming <kpfleming@digium.com>
* Makefile, /: Merged revisions 2086 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2086
| kpfleming | 2007-02-05 15:54:40 -0600 (Mon, 05 Feb 2007) | 2
lines fix version-numbering logic ........
2007-01-31 20:19 +0000 [r2065-2066] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/zaptel-helper (added): r2064: tzafrir | 2007-01-31 21:48:39
+0200 zaptel-helper deserves wider exposure. Note: it is not
getting installed. However it will probably help preven the
braking of Astribank drivers loading for those who do care.
* xpp/utils/genzaptelconf: Merging 1.2 changes of genzaptelconf: *
-l (list) now works reliebly. * Cleared some leftover writes to
standard output. * Fixed xpp spans sort order.
2007-01-31 14:12 +0000 [r2039-2044] Kevin P. Fleming <kpfleming@digium.com>
* pciradio.c, zttool.c, wct4xxp/base.c, ztcfg-dude.c, Makefile,
zaptel.c, torisatool.c, torisa.c, tonezone.c, ztdynamic.c,
wcfxsusb.c, ztmonitor.c, makefw.c, build_tools/genmodconf,
ztcfg.c, wct1xxp.c, wctdm.c, ztd-eth.c, /, wcusb.c, wctdm24xxp.c,
wcfxo.c, tor2.c: Merged revisions 2043 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2043
| kpfleming | 2007-01-31 08:06:34 -0600 (Wed, 31 Jan 2007) | 4
lines fix up author email addresses use the kernel's built-in
support for module aliases instead of manually doing it in
modprobe.conf or equivalent add wctdm8xxp alias for wctdm24xxp
........
* wct4xxp/base.c, /: Merged revisions 2038 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2038
| kpfleming | 2007-01-30 19:33:25 -0600 (Tue, 30 Jan 2007) | 2
lines final fix for non-hotplug firmware loading ........
2007-01-30 18:11 +0000 [r2019] Russell Bryant <russell@digium.com>
* /: Blocked revisions 2018 via svnmerge ........ r2018 | russell |
2007-01-30 12:11:11 -0600 (Tue, 30 Jan 2007) | 5 lines - Make the
build of xpp occur with 2.6.8 or above, instead of 2.6.10 -
remove the installation of the userspace tools - remove the
architecture check (issue #8894, tzafrir) ........
2007-01-29 19:21 +0000 [r1998] Kevin P. Fleming <kpfleming@digium.com>
* wct4xxp/base.c, /: Merged revisions 1996 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1996
| kpfleming | 2007-01-29 13:20:32 -0600 (Mon, 29 Jan 2007) | 2
lines _really_ fix the non-hotplug firmware case ........
2007-01-27 16:16 +0000 [r1988] Kevin P. Fleming <kpfleming@digium.com>
* wct4xxp/base.c, /: Merged revisions 1987 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1987
| kpfleming | 2007-01-27 10:14:54 -0600 (Sat, 27 Jan 2007) | 2
lines properly reference the size symbol produced by objcopy
........
2007-01-26 15:27 +0000 [r1969-1982] Matt Frederickson <creslin@digium.com>
* wctdm24xxp.c: Add additional product support.
2007-01-24 13:11 +0000 [r1954] Kevin P. Fleming <kpfleming@digium.com>
* /, wcfxo.c: Merged revisions 1953 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1953
| kpfleming | 2007-01-24 07:01:36 -0600 (Wed, 24 Jan 2007) | 2
lines might as well fix this driver too :-) ........
2007-01-24 00:38 +0000 [r1944] Russell Bryant <russell@digium.com>
* Makefile, /: Merged revisions 1943 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1943
| russell | 2007-01-23 18:35:48 -0600 (Tue, 23 Jan 2007) | 3
lines If the xpp pieces get built, install the userspace
utilities as well. (issue #8894) ........
2007-01-23 21:49 +0000 [r1937] Matt Frederickson <creslin@digium.com>
* wcte11xp.c, wct1xxp.c, wctdm.c, /, wctdm24xxp.c: Merged revisions
1936 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1936
| mattf | 2007-01-23 15:28:14 -0600 (Tue, 23 Jan 2007) | 3 lines
Make sure we don't clear the interrupt before we might have
received it in shared interrupt line scenarios. ........
2007-01-23 15:39 +0000 [r1921-1924] Kevin P. Fleming <kpfleming@digium.com>
* /, ztd-eth.c: Merged revisions 1923 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1923
| kpfleming | 2007-01-23 09:39:12 -0600 (Tue, 23 Jan 2007) | 2
lines use the proper function prototype for 2.6 kernels ........
* xpp/xpp_zap.c, pciradio.c, wctdm.c, /, zaptel.c, torisa.c,
wctdm24xxp.c: Merged revisions 1920 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1920
| kpfleming | 2007-01-23 09:25:42 -0600 (Tue, 23 Jan 2007) | 2
lines clean up various compiler warnings ........
2007-01-23 01:58 +0000 [r1913] Joshua Colp <jcolp@digium.com>
* /, zonedata.c: Merged revisions 1912 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1912
| file | 2007-01-22 20:57:00 -0500 (Mon, 22 Jan 2007) | 2 lines
Fix Congestion tone for Australia. (issue #8891 reported by JT)
........
2007-01-22 22:43 +0000 [r1892-1899] Kevin P. Fleming <kpfleming@digium.com>
* wct4xxp/base.c, /: Merged revisions 1898 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1898
| kpfleming | 2007-01-22 16:43:06 -0600 (Mon, 22 Jan 2007) | 3
lines use better definition for linked-in firmware data ensure
that hotplug-loaded firmware is released when we are finished
with it ........
* wct4xxp/base.c, /: Merged revisions 1891 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1891
| kpfleming | 2007-01-22 15:12:35 -0600 (Mon, 22 Jan 2007) | 2
lines make the non-hotplug firmware case actually compile again
........
2007-01-22 21:04 +0000 [r1889] Jason Parker <jparker@digium.com>
* Makefile: Fix typo in Makefile Issue 8885, patch by James
2007-01-22 20:59 +0000 [r1878-1887] Kevin P. Fleming <kpfleming@digium.com>
* wct4xxp/base.c, /: Merged revisions 1886 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1886
| kpfleming | 2007-01-22 14:58:30 -0600 (Mon, 22 Jan 2007) | 2
lines might be good if i committed the working version of this
code... ........
* wct4xxp/vpm450m.c, wct4xxp/base.c, wct4xxp/vpm450m.h, /: Merged
revisions 1877 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1877
| kpfleming | 2007-01-22 12:58:34 -0600 (Mon, 22 Jan 2007) | 2
lines update to PR47 Octasic API kit, and use new GetCapacityPins
API call to only attempt downloading the correct firmware for the
modules we find ........
2007-01-18 23:50 +0000 [r1855] Matt Frederickson <creslin@digium.com>
* wct4xxp/base.c: Backporting revs 1812 and 1854 into 1.4.
2007-01-16 23:45 +0000 [r1836] Jason Parker <jparker@digium.com>
* /, fxsdump.c (removed): Merged revisions 1835 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1835
| qwell | 2007-01-16 17:44:28 -0600 (Tue, 16 Jan 2007) | 6 lines
Remove file that was never (literally) able to compile - dates
all the way back to zaptel 0.8.0 If we can figure out where this
coeffs.h comes from, I suppose it would be easy to add this back
in the future. Issue 8493 ........
2007-01-16 04:38 +0000 [r1820-1828] Kevin P. Fleming <kpfleming@digium.com>
* wct4xxp/vpm450m.c, build_tools/make_firmware_object, /: Merged
revisions 1826-1827 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1826
| kpfleming | 2007-01-15 22:30:00 -0600 (Mon, 15 Jan 2007) | 3
lines make the 'firmware object' files load the firmware blobs as
read-only data simplify the code that uses the firmware objects a
bit ........ r1827 | kpfleming | 2007-01-15 22:37:06 -0600 (Mon,
15 Jan 2007) | 2 lines use latest Octasic API tag ........
* wct4xxp/vpm450m.c, wct4xxp/Kbuild, wct4xxp/base.c, Makefile,
build_tools/make_firmware_object (added), wct4xxp/Makefile,
wct4xxp/vpm450m.h, /, wct4xxp, wct4xxp/fw2h.c (removed): Merged
revisions 1818 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1818
| kpfleming | 2007-01-15 19:28:54 -0600 (Mon, 15 Jan 2007) | 3
lines eliminate the fw2h tool, and instead use objcopy to
directly make object files from the firmware binary files pass
HOTPLUG_FIRMWARE down to the module build so that we can avoid
various compiler warnings ........
2006-12-30 19:11 +0000 [r1774] Joshua Colp <jcolp@digium.com>
* Makefile, /: Merged revisions 1773 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1773
| file | 2006-12-30 14:09:50 -0500 (Sat, 30 Dec 2006) | 2 lines
Specify full path to restorecon instead of assuming it will be
available from what is in $PATH. (issue #8671 reported by djflux)
........
2006-12-27 22:49 +0000 [r1767] Kevin P. Fleming <kpfleming@digium.com>
* xpp/xpp_zap.c, xpp/card_fxo.c, /, xpp/card_fxs.c, xpp/xpp_usb.c:
Merged revisions 1766 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1766
| kpfleming | 2006-12-27 16:47:19 -0600 (Wed, 27 Dec 2006) | 2
lines remove pointless duplication of ZAPTEL_VERSION that causes
these modules to be rebuilt every time a commit is made to any
part of Zaptel ........
2006-12-23 Kevin P. Fleming <kpfleming@digium.com>
* Zaptel 1.4.0 released.
2006-12-18 14:01 +0000 [r1726-1729] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/xdefs.h, xpp: r1724@boole: tzafrir | 2006-12-18 15:55:59
+0200 Code is 2.6-specific anyway, no need for an explicit test.
* xpp, xpp/xpp_usb.c: r1723@boole: tzafrir | 2006-12-18 15:54:04
+0200 Use the internal version (without locking) of
usb_reset_device. Intended for kernel 2.6.9 and earlier. Finally
full support of 2.6.8 and 2.6.9. r2937: diego | 2006-12-17
14:20:36 +0200 r2940: tzafrir | 2006-12-17 16:32:51 +0200
* xpp/xpp_zap.c, xpp: r1722@boole: tzafrir | 2006-12-18 15:50:36
+0200 xpp_zap.c: Better error hanlding during module init. orig
r2948: oron | 2006-12-17 18:54:00 +0200
* xpp, xpp/xpd.h: r1721@boole: tzafrir | 2006-12-18 15:46:42 +0200
Assume every 2.6.9 kernel is a later RHEL4 kernel, which
backported the gfp_t typedef. Either way we break some systems).
r2938: diego | 2006-12-17 14:22:16 +0200
2006-12-15 13:50 +0000 [r1716-1719] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/xpp_zap.c, xpp/card_fxo.c, xpp/README.Astribank,
xpp/utils/xpp_fxloader, xpp/utils/genzaptelconf, xpp: Sync to xpp
RELEASE-1.2.0 2933. r2847@boole: diego | 2006-12-03 10:33:00
+0200 added documentation which explains which packages are
needed to build the drivers on different distributions.
r2862@boole: tzafrir | 2006-12-05 08:43:50 +0200
README.Astribank: A typo in the sample config (changeset:2861).
r2891@boole: tzafrir | 2006-12-08 01:11:45 +0200 Re-accept
changeset:2832 after all. r2892@boole: tzafrir | 2006-12-08
02:46:07 +0200 Merge genzaptelconf changeset:2866 from trunk: *
Zapata comment on unidentified channel goes to $zapata_file *
Correct pattern for Sangoma A200 card's channels. r2893@boole:
tzafrir | 2006-12-08 03:11:37 +0200 genzaptelconf: * Add options
xpp_fxo_rxgain: add a custom rxgain for every XPP FXO channel. *
Do print the original line for every channel. r2909@boole:
tzafrir | 2006-12-10 20:03:59 +0200 Add some sleeps in older
kernels in the firmware loading script. r2932@boole: tzafrir |
2006-12-14 17:30:12 +0200 Make the warning about a call to
off-hook FXO debug. At least if we cannot suppress it at module
load time. r2933@boole: tzafrir | 2006-12-14 17:32:00 +0200 Don't
redefine 'bool' on newer kerenls to fix building with kernel
2.6.19. Taken from Digium tree. (from changeset:2930)
* xpp/firmwares/FPGA_1151.hex, xpp/firmwares/FPGA_FXS.hex, xpp:
r1715@boole: tzafrir | 2006-12-15 14:35:26 +0200 Firmwares to fix
caller ID detection timing issue.
2006-12-12 Kevin P. Fleming <kpfleming@digium.com>
* Zaptel 1.4.0-beta3 released.
2006-12-11 19:07 +0000 [r1698-1701] Kevin P. Fleming <kpfleming@digium.com>
* /, xpp/xdefs.h: Merged revisions 1700 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1700
| kpfleming | 2006-12-11 13:05:43 -0600 (Mon, 11 Dec 2006) | 2
lines kernel 2.6.19 now has a type called 'bool', although it's
not completely implemented so there will still be some warnings
when building xpp against 2.6.19 kernel headers ........
* pciradio.c, wct4xxp/base.c, wcte11xp.c, wct1xxp.c, wctdm.c, /,
torisa.c, wcusb.c, wctdm24xxp.c, zaptel.h, tor2.c, wcfxo.c:
Merged revisions 1697 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1697
| kpfleming | 2006-12-11 12:27:15 -0600 (Mon, 11 Dec 2006) | 2
lines kernel 2.6.19 API changes compatibility ........
2006-12-06 23:25 +0000 [r1687] Joshua Colp <jcolp@digium.com>
* Makefile, ztcfg-dude.c, /: Merged revisions 1686 via svnmerge
from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........
r1686 | file | 2006-12-06 18:22:11 -0500 (Wed, 06 Dec 2006) | 2
lines Link ztcfg-dude against stdc++ so we get needed functions.
(issue #8494 reported by Romik) ........
2006-12-01 00:13 +0000 [r1673-1678] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/card_fxo.c, xpp: r1671@boole: tzafrir | 2006-12-01 01:30:24
+0200 r2806@boole: oron | 2006-11-27 16:54:06 +0200 Fixed panic
in ticket:147 merged code from changeset:2802 changeset:2804
* xpp/card_fxo.c, xpp: r1670@boole: tzafrir | 2006-12-01 01:29:57
+0200 r2794@boole: oron | 2006-11-26 14:24:15 +0200 Remove all
SOFT_RING code (unused for a long time).
* xpp/xpp_zap.c, xpp, xpp/xpd.h: r1668@boole: tzafrir | 2006-11-30
23:48:25 +0200 r2832@boole: tzafrir | 2006-11-29 11:06:06 +0200
Add parameter xpp_ec to the module xpp (xpp_zap.c). Defaults to
1. If 0, module will use Zaptel echo canceller even with
XPP_EC_CHUNK. Parameter is read-only for now: cannot be set
through /sys/modules. (Merge of changeset:2830)
* xpp/utils/genzaptelconf, xpp: r1667@boole: tzafrir | 2006-11-30
23:46:46 +0200 r2831@boole: tzafrir | 2006-11-29 11:05:08 +0200
genzaptelconf: A list of countries for which to use busydetect.
(backport of changeset:2829)
* xpp/init_card_3_23, xpp/init_card_4_23, xpp/calibrate_slics,
xpp/card_fxo.c, xpp/xbus-core.c, xpp/card_global.c,
xpp/card_fxs.c, xpp/README.Astribank, xpp/utils/Makefile,
xpp/Makefile, xpp/utils/genzaptelconf, xpp: r1666@boole: tzafrir
| 2006-11-30 23:46:11 +0200 r2817@boole: oron | 2006-11-28
13:39:47 +0200 Maintenance branch for asterisk-1.2.x
2006-11-30 00:24 +0000 [r1664] Jason Parker <jparker@digium.com>
* build_tools/genmodconf, /: Merged revisions 1663 via svnmerge
from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........
r1663 | qwell | 2006-11-29 18:23:33 -0600 (Wed, 29 Nov 2006) | 2
lines Fix issue that was discovered by using dash as /bin/sh
instead of bash. ........
2006-11-29 22:27 +0000 [r1661] Kevin P. Fleming <kpfleming@digium.com>
* /, zconfig.h: Merged revisions 1660 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1660
| kpfleming | 2006-11-29 16:24:07 -0600 (Wed, 29 Nov 2006) | 2
lines clarify the BOOST_RINGER compile-time option ........
2006-11-29 17:31 +0000 [r1656-1658] Matt Frederickson <creslin@digium.com>
* ztcfg.c: Fix for #7860. Make sure we don't allow channel 16 to be
clear if it's in E1/CAS mode.
* zttool.c: Fix for (#8300)
2006-11-26 08:12 +0000 [r1642] Russell Bryant <russell@digium.com>
* wcte11xp.c, /: Merged revisions 1641 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1641
| russell | 2006-11-26 03:10:22 -0500 (Sun, 26 Nov 2006) | 3
lines Remove a misplaced semicolon which caused some debug output
to be printed regardless of the debug setting. (issue #8414,
gknispel_proformatique) ........
2006-11-22 23:30 +0000 [r1637] Matt Frederickson <creslin@digium.com>
* zaptel.c: Update for #8403
2006-11-21 15:19 +0000 [r1623] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/utils/Makefile: Typo: SBINDIR -> BINDIR .
2006-11-17 17:47 +0000 [r1614-1615] Jason Parker <jparker@digium.com>
* Makefile: Fix an issue (8071) where wct4xxp wasn't being put into
/etc/modprobe.d/zaptel (or similar). There should be no reason
that adding wct4xxp to the MODULES variable at this point in the
Makefile, would cause any harm. Somebody please correct me if I'm
wrong... (Fix is slightly different from 1.2)
* /: Blocked revisions 1613 via svnmerge ........ r1613 | qwell |
2006-11-17 11:43:12 -0600 (Fri, 17 Nov 2006) | 5 lines Fix an
issue (8071) where wct4xxp wasn't being put into
/etc/modprobe.d/zaptel (or similar). There should be no reason
that adding wct4xxp to the MODULES variable at this point in the
Makefile, would cause any harm. Somebody please correct me if I'm
wrong... ........
2006-11-17 04:12 +0000 [r1611] BJ Weschke <bweschke@btwtech.com>
* /, zaptel.c: Merged revisions 1610 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1610
| bweschke | 2006-11-16 23:06:05 -0500 (Thu, 16 Nov 2006) | 4
lines mattf - I'm not sure if this is where you wanted the
definitions placed. If not, please fix, but this gets the
compiles working again for now. ........
2006-11-17 00:52 +0000 [r1606-1609] Matt Frederickson <creslin@digium.com>
* zaptel.c: Fix for 7991.
* zaptel.c: Fix for 7769
2006-11-11 14:34 +0000 [r1590] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/init_card_3_23, xpp/init_card_4_23: init_card[34]_23: merge
from 2654,2655. * Redirect stderr to /dev/null. Without any
redirection, it may fail with exitval=4 . Probably, fd 2 is
closed and the shell (or sed which is used in the scripts) tries
to write to it (or do some other I/O related syscall) which
fails. * make XPP_BASE handling identical in the two scripts.
2006-11-09 15:58 +0000 [r1576] Russell Bryant <russell@digium.com>
* Makefile: fix an expression in the install target (issue #8321,
tzafrir)
2006-11-08 23:06 +0000 [r1574] Kevin P. Fleming <kpfleming@digium.com>
* wct4xxp/vpm450m.c, wct4xxp/base.c, wcte11xp.c, wct4xxp/vpm450m.h,
/: Merged revisions 1573 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1573
| kpfleming | 2006-11-08 17:04:33 -0600 (Wed, 08 Nov 2006) | 3
lines clean up recent VPMOCT changes add support for Infineon
FALC rev 2.2 ........
2006-11-08 16:01 +0000 [r1571] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/utils/print_modes.c: Fixed a typo in the "wctdm
reimplementation".
2006-11-08 03:44 +0000 [r1566-1568] Kevin P. Fleming <kpfleming@digium.com>
* wct4xxp, configure, configure.ac, makeopts.in: update configure
script to add searching for libusb update svn:ignore for new
firmware header file names
2006-11-06 22:48 +0000 [r1565] Matt Frederickson <creslin@digium.com>
* wct4xxp/vpm450m.c, wct4xxp/Kbuild, wct4xxp/base.c,
wct4xxp/Makefile, wct4xxp/vpm450m.h, wct4xxp/OCT6114-64D.ima
(added): Add support into 1.4 branch for new VPMOCT64 as well
2006-11-06 19:07 +0000 [r1557-1558] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* xpp/init_card_3_23, xpp/init_card_4_23: Fixes for card init
scripts from rev 2633: * Don't log card init scripts to
/tmp/results . * Document how to trace, though. * init_card_4_23:
don't re-open the slics file.
* xpp/xpp_zap.c, xpp/utils/print_modes.c,
xpp/utils/xpp_fxloader.usermap, xpp/firmwares/FPGA_1151.hex
(added), xpp/xpp_zap.h, xpp/slic.c (removed), xpp/xproto.c,
xpp/firmwares/FPGA_FXS.hex (added), xpp/firmwares/USB_1130.hex
(added), xpp/utils/USB_1130.hex (removed), xpp/utils/FPGA_FXS.hex
(removed), xpp/slic.h (removed), xpp/init_data_3_20.cmd
(removed), xpp/xpd.h, xpp/xproto.h, xpp/firmwares/USB_1150.hex
(added), xpp/init_card_4_23 (added), xpp/calibrate_slics,
xpp/xbus-core.c, xpp/init_data_4_19.cmd (removed),
xpp/utils/adj_clock.c (added), xpp/utils/xpp_fxloader,
xpp/xbus-core.h, xpp/xdefs.h, xpp, xpp/utils,
xpp/utils/genzaptelconf.8, xpp/card_fxo.c, xpp/card_global.c,
xpp/card_fxs.c, xpp/README.Astribank, xpp/card_fxo.h,
xpp/utils/Makefile, xpp/Makefile, xpp/utils/adj_clock.8 (added),
xpp/card_fxs.h, xpp/card_global.h, xpp/init_data_4_20.cmd
(removed), xpp/init_card_3_23 (added), xpp/initialize_registers
(removed), xpp/init_data_3_19.cmd (removed),
xpp/firmwares/LICENSE.firmware (added), xpp/firmwares/README
(added), xpp/utils/USB_8613.hex (removed), xpp/LICENSE.firmware
(removed), xpp/utils/genzaptelconf, xpp/firmwares (added),
xpp/xpp_usb.c: Merging xpp driver release 1.2 (rev. 2569),
originally team/tzafrir/xpp_1.2 * Should build well. Almost
final. * genzaptelconf: Also work when zap_autoreg=0 *
README.Astribank updated for rev. 1.2. * xpp/utils/Makefile: Use
$< with cc -c * Get xpp/utils configuration from autoconf
(without changesin top dir)
2006-11-01 19:04 +0000 [r1547] Russell Bryant <russell@digium.com>
* Makefile, wct4xxp/Makefile, configure, configure.ac,
xpp/utils/Makefile, makeopts.in: instead of setting HOSTCC and CC
directly in the Makefile, use the information provided by the
configure script (issue #8055, tzafrir)
2006-10-31 06:26 +0000 [r1543] Russell Bryant <russell@digium.com>
* Makefile, /: Merged revisions 1542 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1542
| russell | 2006-10-31 01:25:16 -0500 (Tue, 31 Oct 2006) | 3
lines fix the installation of wct4xxp for 2.4 kernels (issue
#7964, fixed by gkloepfer, but the committed fix is slightly
modified) ........
2006-10-26 00:03 +0000 [r1536] Kevin P. Fleming <kpfleming@digium.com>
* wctdm.c, /, wctdm24xxp.c: Merged revisions 1534-1535 via svnmerge
from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........
r1534 | kpfleming | 2006-10-25 18:54:41 -0500 (Wed, 25 Oct 2006)
| 2 lines do ProSLIC 3215 check properly ........ r1535 |
kpfleming | 2006-10-25 19:00:31 -0500 (Wed, 25 Oct 2006) | 2
lines do ProSLIC 3215 check properly in this driver too ........
2006-10-24 01:33 +0000 [r1528-1530] Russell Bryant <russell@digium.com>
* pciradio_vhdl.tar.gz (removed), raddiag.tar.gz (removed): Both of
these files are corrupted and can not be decompressed, so they
need to be re-added. (issue #8134)
* /, doc/ztmonitor.8, doc/zttool.8, doc/ztcfg.8: Merged revisions
1527 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1527
| russell | 2006-10-23 21:08:27 -0400 (Mon, 23 Oct 2006) | 3
lines convert some characters of ISO8859-1 encoding to be UTF-8
(issue #8200, jcollie) ........
2006-10-20 01:26 +0000 [r1520] Joshua Colp <jcolp@digium.com>
* /, torisa.c, zaptel.h, zconfig.h: Merged revisions 1519 via
svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2
........ r1519 | file | 2006-10-19 21:23:26 -0400 (Thu, 19 Oct
2006) | 2 lines Later distros have now taken to removing this
file as it has been deprecated for awhile now... so on kernels
2.6.18 or higher we can safely not include it. (props to jsmith)
........
2006-10-18 02:15 +0000 [r1518] Russell Bryant <russell@digium.com>
* /: Blocked revisions 1517 via svnmerge ........ r1517 | russell |
2006-10-17 22:14:43 -0400 (Tue, 17 Oct 2006) | 3 lines remove
ROOT_PREFIX, and move INSTALL_PREFIX to before the first time it
is used (issue #7913, darren1713) ........
2006-10-17 Kevin P. Fleming <kpfleming@digium.com>
* Zaptel 1.4.0-beta2 released.
2006-10-17 16:40 +0000 [r1507] Russell Bryant <russell@digium.com>
* wct4xxp/base.c: Set the readbuf size to be the same size of the
variable, readsize. This buffer was 31 bytes, while the readsize
could be 32 bytes, causing a read into invalid memory. (issue
#8155, araasch)
2006-10-11 17:25 +0000 [r1500] Joshua Colp <jcolp@digium.com>
* Makefile: Copy to both directories, not just the first one.
2006-10-02 23:50 +0000 [r1490] Matt O'Gorman <mogorman@digium.com>
* wctdm.c, wctdm24xxp.c: add support for setting gain registers on
the fxo and fxs modules.
2006-09-20 Kevin P. Fleming <kpfleming@digium.com>
* Zaptel 1.4.0-beta1 released.
