%define name xxv
%define version 0.90
%define rel 1
Summary: Xtreme eXtension for VDR
Name: %name
Version: %version
Release: %mkrel %rel
Group: Video
License: LGPL
URL: http://xpix.dieserver.de/
Source: http://xpix.dieserver.de/downloads/xxv/%name-%version.tar.bz2
Source2: xxv.init
Source3: xxv.sysconfig
Source4: xxv.logrotate
BuildRoot: %{_tmppath}/%{name}-buildroot
BuildArch: noarch
Requires(post): rpm-helper
Requires(preun): rpm-helper
Requires: vdr-common
Requires: mysql
Requires: vdr2jpeg
# find-requires fails to add:
Requires: perl(Tie::LogFile)
Requires: perl(Config::Tiny)
Requires: perl(Net::IP::Match::Regexp)
Requires: perl(Term::ReadLine::Perl)
Requires: perl(Module::Reload)
Requires: perl(Mail::SendEasy)
Requires: perl(Net::XMPP)
Requires: perl(MP3::Icecast)
Requires: perl(Event::File)
Requires: perl(Net::Amazon::Request::Artist)
Requires: perl(Proc::Killfam)
%define _provides_exceptions perl(HTML::TextToHTML)\\|perl(SOAPService)\\|perl(SOAP::Transport::HTTP::Event)\\|perl(Tools)
%define _requires_exceptions perl(HTML::TextToHTML)\\|perl(SOAPService)\\|perl(SOAP::Transport::HTTP::Event)\\|perl(Tools)
%description
XXV means "Xtreme eXtension for VDR" and is a central service is for
the administration of the VDR and its environment, with which
different of haven are open and these different services can serve.
An additional haven over a Plugin to construct should be just as
simple, to make available as also a certain service. The letter of a
Plugins goes very fast, there the input (Vdr, Database etc.) as well
as the output (telnet, HTTP...) generically was realized. It should
be e.g. possible thus to register with a telnet CONSOLE,
HttpBrowser, Wapphone, etc. an autotimer. This should substantially
faster the EPG data to scan be able (MySQL data base) and over an
interface the VDR the new timer communicate. Naturally also is
considered to the single mode of the SVdrP and only one instruction
is mailed. Afterwards the haven is again closed immediately, so that
other programs can access again svdrp.
%prep
%setup -q
# Corruption?
perl -pi -e 's/^.*package XXV::OUTPUT::Wml;$/package XXV::OUTPUT::Wml;/' lib/XXV/OUTPUT/Wml.pm
# Setup default config
perl -pi -e 's,file=/video/channels.conf,file=%{_vdr_cfgdir}/channels.conf,' etc/xxvd.cfg.example
#perl -pi -e 's,epgfile=/video/epg.data,epgfile=%{_vdr_videodir}/epg.data,' etc/xxvd.cfg.example
perl -pi -e 's,epgimages=/var/cache/xxv/epgimages,epgimages=%{_vdr_videodir}/epgimages,' etc/xxvd.cfg.example
perl -pi -e 's,Language=de_DE,Language=en_US,' etc/xxvd.cfg.example
perl -pi -e 's,initscript=/etc/init.d/xxvd,initscript=%{_initrddir}/xxvd,' etc/xxvd.cfg.example
perl -pi -e 's,commandfile=/video/reccmds.conf,file=%{_vdr_cfgdir}/reccmds.conf,' etc/xxvd.cfg.example
perl -pi -e 's,videodir=/video,videodir=%{_vdr_videodir},' etc/xxvd.cfg.example
perl -pi -e 's,commands=/video/commands.conf,commands=%{_vdr_cfgdir}/commands.conf,' etc/xxvd.cfg.example
perl -pi -e 's,file=/video/timers.conf,file=%{_vdr_cfgdir}/timers.conf,' etc/xxvd.cfg.example
perl -pi -e 's,tempimages=/var/cache/xxv/temp,tempimages=%{_var}/cache/%{name}/temp,' etc/xxvd.cfg.example
perl -pi -e 's,dir=/vtx,dir=%{_vdr_plugin_cachedir}/osdteletext,' etc/xxvd.cfg.example
perl -pi -e 's,"\$RealBin/../lib","%{_datadir}/%{name}",' bin/xxvd
perl -pi -e 's,"/var/log/xxvd.log","%{_logdir}/%{name}/xxvd.log",' bin/xxvd
perl -pi -e 's,"\$RealBin/../locale","%{_datadir}/locale",' bin/xxvd
perl -pi -e 's,"\$RealBin/../lib/XXV,"%{_datadir}/%{name}/XXV,' bin/xxvd
perl -pi -e 's,"\$RealBin/../etc/xxvd.cfg","%{_localstatedir}/%{name}/xxvd.cfg",' bin/xxvd
perl -pi -e 's,"\$RealBin/../doc","%{_localstatedir}/%{name}/doc",' bin/xxvd
sed -i '/HTMLDIR/s,"\$RealBin/../","%{_datadir}/%{name}/skins",' bin/xxvd
perl -pi -e 's,"\$RealBin/../share/,"%{_datadir}/%{name}/,' bin/xxvd
perl -pi -e 's,"\$RealBin/../contrib","%{_datadir}/%{name}/contrib",' bin/xxvd
cat > README.install.urpmi <<EOF
You must create the database "xxv" on your mysql server, create a
mysql user for xxv and enter the correct USR and PWD in the
[General] section of %{_localstatedir}/%{name}/xxvd.cfg.
You can create the database with default password with the following
command:
mysql -u root < %{_datadir}/%{name}/contrib/create-database.sql
No xxvd.cfg editing is then necessary.
Alternatively, here are the example commands for creating a new
database with different credentials:
mysql -u root -e "create database xxv;"
mysql -u root -e "grant all privileges on xxv.* to username@localhost IDENTIFIED BY 'password';"
mysql -u root -e "flush privileges;"
If you wish to later change the username and/or password, you must
change both the xxvd.cfg entry and the one of mysql.
By default the web interface is on port 8080 with username "xxv"
and password "xxv". You can change these from the web interface.
Please go through the configuration options carefully and disable
the modules you do not need.
EOF
%install
rm -rf %{buildroot}
install -d -m755 %{buildroot}%{_bindir}
install -m755 bin/xxvd %{buildroot}%{_bindir}
install -d -m755 %{buildroot}%{_sysconfdir}
install -d -m755 %{buildroot}%{_localstatedir}/%{name}
install -m644 etc/xxvd.cfg.example %{buildroot}%{_localstatedir}/%{name}/xxvd.cfg
ln -s %{_localstatedir}/%{name} %{buildroot}%{_sysconfdir}/%{name}
install -d -m755 %{buildroot}%{_var}/cache/%{name}
install -d -m755 %{buildroot}%{_datadir}/%{name}/contrib
install -m644 contrib/*.sql %{buildroot}%{_datadir}/%{name}/contrib
install -m755 contrib/update-xxv %{buildroot}%{_datadir}/%{name}/contrib
install -d -m755 %{buildroot}%{_localstatedir}/%{name}/doc
install -m644 doc/* %{buildroot}%{_localstatedir}/%{name}/doc
install -d -m755 %{buildroot}%{_sysconfdir}/logrotate.d
install -m644 %SOURCE4 %{buildroot}%{_sysconfdir}/logrotate.d/%{name}
install -d -m755 %{buildroot}%{_datadir}/%{name}/skins
cp -a wml html %{buildroot}%{_datadir}/%{name}/skins
ln -s html %{buildroot}%{_datadir}/%{name}/skins/default
cp -a lib/Tools.pm lib/XXV lib/HTML lib/SOAP share/* %{buildroot}%{_datadir}/%{name}
for f in locale/*/; do
install -d -m755 \
%{buildroot}%{_datadir}/locale/$(basename $f)/LC_MESSAGES
install -m644 $f/LC_MESSAGES/xxv.mo \
%{buildroot}%{_datadir}/locale/$(basename $f)/LC_MESSAGES
done
install -d -m755 %{buildroot}%{_logdir}/%{name}
install -d -m755 %{buildroot}%{_sysconfdir}/sysconfig
install -m644 %SOURCE3 %{buildroot}%{_sysconfdir}/sysconfig/xxv
install -d -m755 %{buildroot}%{_initrddir}
install -m755 %SOURCE2 %{buildroot}%{_initrddir}/xxv
install -d -m755 %{buildroot}%{_logdir}/xxv
%find_lang xxv
%clean
rm -rf %{buildroot}
%post
%_post_service %name
%preun
%_preun_service %name
%files -f xxv.lang
%defattr(-,root,root)
%doc doc/*.txt README.install.urpmi
%attr(-,vdr,vdr) %dir %{_localstatedir}/xxv
%attr(-,vdr,vdr) %dir %{_logdir}/xxv
%attr(0640,vdr,vdr) %config(noreplace) %{_localstatedir}/xxv/xxvd.cfg
%attr(-,vdr,vdr) %{_var}/cache/%{name}
%config(noreplace) %{_sysconfdir}/sysconfig/xxv
%config(noreplace) %{_sysconfdir}/logrotate.d/%{name}
%attr(-,vdr,vdr) %dir %{_localstatedir}/xxv/doc
%attr(-,vdr,vdr) %{_localstatedir}/xxv/doc/*
%{_sysconfdir}/xxv
%{_initrddir}/xxv
%{_bindir}/xxvd
%{_datadir}/%{name}
%changelog
* Thu Mar 01 2007 Anssi Hannula <anssi@mandriva.org> 0.90-1mdv2007.0
+ Revision: 130778
- 0.90
- fix requires
- fix initscript
- Import xxv
* Sat Jul 08 2006 Anssi Hannula <anssi@mandriva.org> 0.80-1mdv2007.0
- 0.80
* Mon Jun 19 2006 Anssi Hannula <anssi@mandriva.org> 0.72-2mdv2007.0
- use _ prefix for system path macros
- protect xxvd.cfg, it contains credentials in cleartext
* Fri Jun 2 2006 Anssi Hannula <anssi@mandriva.org> 0.72-1mdv2007.0
- initial Mandriva release
