# # DEVICE ATTRIBUTES OPTIONS # # The port GUID on which the OpenSM is running guid 0x0000000000000000 # M_Key value sent to all ports qualifying all Set(PortInfo) m_key 0x0000000000000000 # The lease period used for the M_Key on this subnet in [sec] m_key_lease_period 0 # SM_Key value of the SM used for SM authentication sm_key 0x0000000000000001 # SM_Key value to qualify rcv SA queries as 'trusted' sa_key 0x0000000000000001 # Note that for both values above (sm_key and sa_key) # OpenSM version 3.2.1 and below used the default value '1' # in a host byte order, it is fixed now but you may need to # change the values to interoperate with old OpenSM running # on a little endian machine. # Subnet prefix used on this subnet subnet_prefix 0xfe80000000000000 # The LMC value used on this subnet lmc 0 # lmc_esp0 determines whether LMC value used on subnet is used for # enhanced switch port 0. If TRUE, LMC value for subnet is used for # ESP0. Otherwise, LMC value for ESP0s is 0. lmc_esp0 FALSE # The code of maximal time a packet can live in a switch # The actual time is 4.096usec * 2^<packet_life_time> # The value 0x14 disables this mechanism packet_life_time 0x12 # The number of sequential packets dropped that cause the port # to enter the VLStalled state. The result of setting this value to # zero is undefined. vl_stall_count 0x07 # The number of sequential packets dropped that cause the port # to enter the VLStalled state. This value is for switch ports # driving a CA or router port. The result of setting this value # to zero is undefined. leaf_vl_stall_count 0x07 # The code of maximal time a packet can wait at the head of # transmission queue. # The actual time is 4.096usec * 2^<head_of_queue_lifetime> # The value 0x14 disables this mechanism head_of_queue_lifetime 0x12 # The maximal time a packet can wait at the head of queue on # switch port connected to a CA or router port leaf_head_of_queue_lifetime 0x10 # Limit the maximal operational VLs max_op_vls 5 # Force PortInfo:LinkSpeedEnabled on switch ports # If 0, don't modify PortInfo:LinkSpeedEnabled on switch port # Otherwise, use value for PortInfo:LinkSpeedEnabled on switch port # Values are (IB Spec 1.2.1, 14.2.5.6 Table 146 "PortInfo") # 1: 2.5 Gbps # 3: 2.5 or 5.0 Gbps # 5: 2.5 or 10.0 Gbps # 7: 2.5 or 5.0 or 10.0 Gbps # 2,4,6,8-14 Reserved # Default 15: set to PortInfo:LinkSpeedSupported force_link_speed 15 # The subnet_timeout code that will be set for all the ports # The actual timeout is 4.096usec * 2^<subnet_timeout> subnet_timeout 18 # Threshold of local phy errors for sending Trap 129 local_phy_errors_threshold 0x08 # Threshold of credit overrun errors for sending Trap 130 overrun_errors_threshold 0x08 # # PARTITIONING OPTIONS # # Partition configuration file to be used partition_config_file /etc/ofed/partitions.conf # Disable partition enforcement by switches no_partition_enforcement FALSE # # SWEEP OPTIONS # # The number of seconds between subnet sweeps (0 disables it) sweep_interval 10 # If TRUE cause all lids to be reassigned reassign_lids FALSE # If TRUE forces every sweep to be a heavy sweep force_heavy_sweep FALSE # If TRUE every trap will cause a heavy sweep. # NOTE: successive identical traps (>10) are suppressed sweep_on_trap TRUE # # ROUTING OPTIONS # # If TRUE count switches as link subscriptions port_profile_switch_nodes FALSE # Name of file with port guids to be ignored by port profiling port_prof_ignore_file (null) # Routing engine # Multiple routing engines can be specified separated by # commas so that specific ordering of routing algorithms will # be tried if earlier routing engines fail. # Supported engines: minhop, updn, file, ftree, lash, dor routing_engine (null) # Connect roots (use FALSE if unsure) connect_roots FALSE # Use unicast routing cache (use FALSE if unsure) use_ucast_cache FALSE # Lid matrix dump file name lid_matrix_dump_file (null) # LFTs file name lfts_file (null) # The file holding the root node guids (for fat-tree or Up/Down) # One guid in each line root_guid_file (null) # The file holding the fat-tree compute node guids # One guid in each line cn_guid_file (null) # The file holding the node ids which will be used by Up/Down algorithm instead # of GUIDs (one guid and id in each line) ids_guid_file (null) # The file holding guid routing order guids (for MinHop and Up/Down) guid_routing_order_file (null) # SA database file name sa_db_file (null) # # HANDOVER - MULTIPLE SMs OPTIONS # # SM priority used for deciding who is the master # Range goes from 0 (lowest priority) to 15 (highest). sm_priority 15 # If TRUE other SMs on the subnet should be ignored ignore_other_sm FALSE # Timeout in [msec] between two polls of active master SM sminfo_polling_timeout 10000 # Number of failing polls of remote SM that declares it dead polling_retry_number 4 # If TRUE honor the guid2lid file when coming out of standby # state, if such file exists and is valid honor_guid2lid_file FALSE # # TIMING AND THREADING OPTIONS # # Maximum number of SMPs sent in parallel max_wire_smps 32 # The maximum time in [msec] allowed for a transaction to complete transaction_timeout 200 # Maximal time in [msec] a message can stay in the incoming message queue. # If there is more than one message in the queue and the last message # stayed in the queue more than this value, any SA request will be # immediately returned with a BUSY status. max_msg_fifo_timeout 10000 # Use a single thread for handling SA queries single_thread FALSE # # MISC OPTIONS # # Daemon mode daemon TRUE # SM Inactive sm_inactive FALSE # Babbling Port Policy babbling_port_policy FALSE # # Event Plugin Options # event_plugin_name (null) # # Node name map for mapping node's to more descriptive node descriptions # (man ibnetdiscover for more information) # node_name_map_name (null) # # DEBUG FEATURES # # The log flags used log_flags 0x03 # Force flush of the log file after each log message force_log_flush FALSE # Log file to be used log_file /var/log/opensm.log # Limit the size of the log file in MB. If overrun, log is restarted log_max_size 0 # If TRUE will accumulate the log over multiple OpenSM sessions accum_log_file TRUE # The directory to hold the file OpenSM dumps dump_files_dir /var/log/ # If TRUE enables new high risk options and hardware specific quirks enable_quirks FALSE # If TRUE disables client reregistration no_clients_rereg FALSE # If TRUE OpenSM should disable multicast support and # no multicast routing is performed if TRUE disable_multicast FALSE # If TRUE opensm will exit on fatal initialization issues exit_on_fatal TRUE # console [off|local] console off # Telnet port for console (default 10000) console_port 10000 # # QoS OPTIONS # # Enable QoS setup qos FALSE # QoS policy file to be used qos_policy_file /etc/ofed/qos-policy.conf # QoS default options qos_max_vls 0 qos_high_limit -1 qos_vlarb_high (null) qos_vlarb_low (null) qos_sl2vl (null) # QoS CA options qos_ca_max_vls 0 qos_ca_high_limit -1 qos_ca_vlarb_high (null) qos_ca_vlarb_low (null) qos_ca_sl2vl (null) # QoS Switch Port 0 options qos_sw0_max_vls 0 qos_sw0_high_limit -1 qos_sw0_vlarb_high (null) qos_sw0_vlarb_low (null) qos_sw0_sl2vl (null) # QoS Switch external ports options qos_swe_max_vls 0 qos_swe_high_limit -1 qos_swe_vlarb_high (null) qos_swe_vlarb_low (null) qos_swe_sl2vl (null) # QoS Router ports options qos_rtr_max_vls 0 qos_rtr_high_limit -1 qos_rtr_vlarb_high (null) qos_rtr_vlarb_low (null) qos_rtr_sl2vl (null) # Prefix routes file name prefix_routes_file /etc/ofed/prefix-routes.conf # # IPv6 Solicited Node Multicast (SNM) Options # consolidate_ipv6_snm_req FALSE