2008-02-12 Josep Torra Valles <josep@fluendo.com> * src/gstmpegdemux.c: (gst_flups_demux_handle_dvd_event): Create a pad for video when the dvd event is handled, fixes dvdreadsrc/playbin pipelines. 2008-02-12 Josep Torra Valles <josep@fluendo.com> * src/gstmpegdemux.c: (gst_flups_demux_send_data), (gst_flups_demux_src_query), (gst_flups_demux_parse_pack_start), (gst_flups_demux_data_cb), (gst_flups_demux_change_state): * src/gstmpegdemux.h: Added base_time to deal with streams that have start time greater than 0. Changed the behaviour to continue demuxing when it's found an stream of unknown type, the other streams could be valid. Emit no more pads signal after two seconds of bitstream. 2008-02-11 Josep Torra Valles <josep@fluendo.com> * src/gstmpegdemux.c: (gst_flups_demux_sink_event), (gst_flups_demux_src_event), (gst_flups_demux_parse_pack_start): Fixes some typos and a memory leak. 2008-02-11 Josep Torra Valles <josep@fluendo.com> * src/gstmpegdemux.c: (gst_flups_demux_class_init), (gst_flups_demux_init), (gst_flups_demux_send_data), (gst_flups_demux_sink_event), (gst_flups_demux_src_event), (gst_flups_demux_src_query), (gst_flups_demux_parse_pack_start), (gst_flups_demux_parse_sys_head), (gst_flups_demux_parse_psm), (gst_flups_demux_resync), (gst_flups_demux_chain), (gst_flups_demux_change_state): * src/gstmpegdemux.h: * src/gstmpegtsdemux.c: (gst_fluts_stream_parse_pmt), (gst_fluts_demux_parse_stream): * src/gstpesfilter.c: (gst_pes_filter_init), (gst_pes_filter_uninit), (gst_pes_filter_parse), (gst_pes_filter_process), (gst_pes_filter_flush): * src/gstpesfilter.h: Code cleanup, removed an obsolete hack to resync with DTS. Added more accurate calcultion for position and duration using bytes/SCR interpolation. Added code to track the byte offset in the adapter. Added some comments on the code. Added/changed some GST_DEBUG info. 2008-02-04 Zaheer Abbas Merali <zaheerabbas at merali dot org> * src/gstmpegtsdemux.c: Be more stringent when wildly different pts comes in and drop packet if timestamp is far away from what it should be. 2008-02-02 Zaheer Abbas Merali <zaheerabbas at merali dot org> * src/gstmpegtsdemux.c: Use the correct unref methods! 2008-02-01 Zaheer Abbas Merali <zaheerabbas at merali dot org> * src/gstmpegtsdemux.c: Replace GST_PAD_PEER with gst_pad_get_peer. 2008-02-01 Zaheer Abbas Merali <zaheerabbas at merali dot org> * src/gstmpegtsdemux.c: Do not use gst_pad_peer_query() which was introduced in 0.10.15. 2008-01-31 Zaheer Abbas Merali <zaheerabbas at merali dot org> * src/gstmpegtsdemux.c: Run gst-indent. If a pid is PCR for more than one PMT or does not actually belong to a known program, still update when disconts/wraparounds occur. 2008-01-30 Zaheer Abbas Merali <zaheerabbas at merali dot org> * src/gstmpegtsdemux.c: Do not parse pmt if we're not interested, ie if program number is different to the one set by the property. 2008-01-26 Zaheer Abbas Merali <zaheerabbas at merali dot org> reviewed by: Zaheer Abbas Merali patch by: Alessandro Decina * src/gstmpegtsdemux.c: * src/gstmpegtsdemux.h: Add clocking and latency query handling to flutsdemux. 2008-01-22 Julien Moutte <julien@fluendo.com> * configure.ac: back to TRUNK. = release 0.10.14 === 2008-01-11 Wim Taymans <wim.taymans@collabora.co.uk> * src/gstmpegdemux.c: (gst_flups_demux_create_stream), (gst_flups_demux_send_data), (gst_flups_demux_mark_discont), (gst_flups_demux_handle_dvd_event), (gst_flups_demux_sink_event), (gst_flups_demux_parse_pack_start), (gst_flups_demux_data_cb), (gst_flups_demux_resync), (gst_flups_demux_is_pes_sync), (gst_flups_demux_chain), (gst_flups_demux_change_state): * src/gstmpegdemux.h: Separate discont handling from newsegment. Add basic support for reverse playback. 2008-01-10 Josep Torra Valles <josep@fluendo.com> * src/gstmpegdemux.c: (gst_flups_demux_resync): Avoid calling gst_adapter_peek_into/memcpy when the parser is in NEED_MORE_DATA behavior and not all required data is available. Speed improvement. 2008-01-03 Zaheer Abbas Merali <zaheerabbas at merali dot org> * src/gstmpegtsdemux.c: If wraparound detected in the PTS before detected in the PCR, then do not update base_time..it will be done when detected in the PCR. If PCR discont has been detected, only update base time of all the ES pids if the pid with the pcr is the actual pcr pid for this program. Encountered a ts that has 2 different ES pids with pcr appearing in adaptation field. This causes craziness as both will detect disconts and cause a double update. 2007-11-22 Zaheer Abbas Merali <zaheerabbas at merali dot org> * src/gstmpegtsdemux.c: Handle AC3 streams in DVB by checking streams with private type if the DVB_AC3 descriptor was found in the PMT table for that stream. Based on patch from: Thomas ( LazyT@gmx.net). See #69. 2007-11-21 Julien Moutte <julien@fluendo.com> * configure.ac: back to TRUNK. = release 0.10.13 === 2007-11-21 Julien MOUTTE <julien@moutte.net> * src/flutspmtstreaminfo.h: missing prototype. * src/gstmpegdemux.c: (gst_flups_demux_create_stream), (gst_flups_demux_parse_psm), (gst_flups_demux_chain): Implement PSM parsing to have complete info about the streams and support more formats than just MPEG2. (tested with H264 PS). * src/gstmpegtsdemux.c: (gst_fluts_activate_pmt), (fluts_demux_build_pmt_info): Fix build with -Werror -Wall. 2007-11-19 Zaheer Abbas Merali <zaheerabbas at merali dot org> * src/gstmpegtsdemux.c: Fix discont detection code. 2007-08-20 Zaheer Abbas Merali <zaheerabbas at merali dot org> * src/gstsectionfilter.c (gst_section_is_complete): Fix comparison of unsigned int - 3. 2007-08-20 Zaheer Abbas Merali <zaheerabbas at merali dot org> patch by: Alessandro Decina * src/gstmpegtsdemux.c: Remove "not meant to be committed" debug code. 2007-08-03 Zaheer Abbas Merali <zaheerabbas at merali dot org> * src/flutspmtinfo.c (PROP_DESCRIPTORS, fluts_pmt_info_class_init, fluts_pmt_info_init, fluts_pmt_info_finalize, fluts_pmt_info_get_property, fluts_pmt_info_add_descriptor): * src/flutspmtinfo.h (descriptors, streams, FluTsPmtInfo): * src/flutspmtstreaminfo.c (PROP_LANGUAGES, PROP_STREAM_TYPE, PROP_DESCRIPTORS, fluts_pmt_stream_info_class_init, fluts_pmt_stream_info_init, fluts_pmt_stream_info_finalize, fluts_pmt_stream_info_new, fluts_pmt_stream_info_add_language, fluts_pmt_stream_info_add_descriptor, fluts_pmt_stream_info_get_property): * src/flutspmtstreaminfo.h (stream_type, descriptors, FluTsPmtStreamInfo): * src/gstmpegtsdemux.c (private_template, gst_fluts_activate_pmt, gst_fluts_demux_parse_stream, fluts_demux_build_pmt_info): Patch from: Allesandro Decina Adds a descriptors property to the pmt info. Needed for handling CA with dvb outside of the demuxer. 2007-06-26 Zaheer Abbas Merali <zaheerabbas at merali dot org> * src/gstmpegdesc.c (gst_mpeg_descriptor_nth): Fix from: Alessandro Decina Fix obviously incorrect logic. 2007-06-07 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegdemux.c: * src/gstmpegtsdemux.c: Make the pad templates match the names of the pads produced. Closes: #49 (https://core.fluendo.com/gstreamer/trac/ticket/49) 2007-06-07 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegdemux.c: (gst_flups_demux_class_init), (gst_flups_demux_init): Make the default sync method be SCR rather than auto-switching, which seems broken. Fixes https://core.fluendo.com/gstreamer/trac/ticket/53 = release 0.10.12 === 2007-05-25 Christian Schaller <christian at fluendo dot com> * configure.ac: revery 0.10.10 requirement to 0.10.3 2007-04-05 Zaheer Abbas Merali <<zaheerabbas at merali dot org>> * src/gstmpegtsdemux.c (gst_fluts_demux_data_cb): Check for PMT_pid being a valid pid number before using it as an index. 2007-03-30 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegdemux.c: (gst_flups_demux_send_data), (gst_flups_demux_src_query): Fix my inverted logic in the query check. Fix the DTS/SCR sync switch logic so it doesn't switch to DTS if the SCR ends up slightly behind the DTS for whatever reason. 2007-03-30 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegdemux.c: (gst_flups_demux_src_query): See if upstream can answer duration queries in the desired format directly. 2007-03-29 Zaheer Abbas Merali <zaheerabbas at merali dot org> * src/gstmpegtsdemux.c (gst_fluts_demux_data_cb): Sanity-check the wraparound conditions. 2007-03-28 Zaheer Abbas Merali <zaheerabbas at merali dot org> * src/gstmpegtsdemux.c: (gst_fluts_demux_data_cb), (gst_fluts_demux_resync_cb), (gst_fluts_demux_is_reserved_PID), (gst_fluts_demux_get_stream_for_PID), (gst_fluts_stream_parse_pmt), (gst_fluts_demux_parse_adaptation_field): * src/gstmpegtsdemux.h: Handle disconts in pcr. 2007-03-22 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegdemux.c: (gst_flups_demux_src_query): Make sure to pass unknown queries upstream so they can be handled. 2007-02-28 Thomas Vander Stichele <thomas at apestaart dot org> * Makefile.am: * autogen.sh: * configure.ac: use new AG_GST 2007-02-21 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegdemux.c: (gst_flups_demux_src_event): Handle the case of setting stop time in a seek to -1, which indicates that playback should continue until the end of file. === release 0.10.11 === 2007-02-16 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegdefs.h: * src/gstmpegtsdemux.c: (gst_fluts_is_dirac_stream), (gst_fluts_stream_is_video), (gst_fluts_demux_fill_stream), (gst_fluts_demux_data_cb), (gst_fluts_stream_parse_pmt): * src/gstmpegtsdemux.h: * src/gstpesfilter.c: (gst_pes_filter_init), (gst_pes_filter_is_sync), (gst_pes_filter_parse): * src/gstpesfilter.h: Implement the new Dirac mapping based on a recognising a Registration Descriptor. Remove mention of Timecode 2007-01-25 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegtsdemux.c: (gst_fluts_demux_parse_transport_packet): Fix compilation on GStreamer < 0.10.6 by not using gst_adapter_take_buffer. === release 0.10.10 === 2006-12-19 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegtsdemux.c: Define GST_FLOW_IS_OK locally when not available (on GStreamer core < 0.10.7) 2006-12-19 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegtsdemux.c: Define GST_BUFFER_IS_DISCONT locally if it's not available (because we're compiling on an older GStreamer for example) === release 0.10.9 === 2006-11-23 Wim Taymans <wim@fluendo.com> * src/gstmpegdemux.c: (gst_flups_demux_send_data), (gst_flups_demux_handle_dvd_event), (gst_flups_demux_sink_event), (gst_flups_demux_parse_pack_start), (gst_flups_demux_data_cb), (gst_flups_demux_is_pes_sync), (gst_flups_demux_chain): Move code to mark streams as DISCONT to a function. Mark streams DISCONT when input buffer is discont and after a flush stop. 2006-11-14 Zaheer Abbas Merali <zaheerabbas at merali dot org> * src/gstmpegtsdemux.c: (gst_fluts_activate_pmt): Comment out pad removal. 2006-11-14 Zaheer Abbas Merali <zaheerabbas at merali dot org> * src/gstmpegtsdemux.c: (gst_fluts_demux_data_cb), Fix bug where packet arriving after wrap around but with pts before wrap around will set last_time. (fluts_demux_build_pmt_info): Use g_strndup instead of a for loop :) 2006-11-13 Zaheer Abbas Merali <zaheerabbas at merali dot org> * src/flutspmtstreaminfo.c: (fluts_pmt_stream_info_class_init), (fluts_pmt_stream_info_set_property), (fluts_pmt_stream_info_get_property): * src/flutspmtstreaminfo.h: Add a languages GValueArray to the PMT stream info. Useful for getting the languages covered by an elementary stream. * src/gstmpegdesc.h: Make macro for getting the language code more useful, a pointer to the first of the 3 characters is more useful than a guint32 of the 24 bytes. * src/gstmpegtsdemux.c: (fluts_demux_build_pmt_info): Add languages to the PMT stream info, if they exist. 2006-11-13 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegtsdemux.c: (gst_fluts_stream_parse_pmt): Fix typo that made all video streams be output with MPEG-2 caps, and all audio streams become MP3 2006-11-10 Zaheer Abbas Merali <zaheerabbas at merali dot org> * src/gstmpegtsdemux.c: (gst_fluts_demux_remove_pads), Send EOS before removing a pad. (gst_fluts_demux_data_cb): Handle case where pts has wrapped around already but we receive packets with pts of before the wrap around. 2006-11-10 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegtsdemux.c: (gst_fluts_demux_remove_pads), (gst_fluts_demux_data_cb), (gst_fluts_stream_parse_pmt), (gst_fluts_stream_parse_pat): * src/gstmpegtsdemux.h: Signal no-more-pads before removing pads, to make sure its clear we're starting a new chain. Re-activate the current PMT when it changes. Don't do wrap-around detection when the pts hasn't been specified in the PES packet. 2006-11-10 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegdemux.c: (gst_flups_demux_change_state): * src/gstmpegtsdemux.c: (gst_fluts_demux_reset), (gst_fluts_demux_remove_pads), (gst_fluts_activate_pmt), (gst_fluts_stream_parse_pmt), (gst_fluts_stream_parse_pat), (gst_fluts_demux_parse_stream), (fluts_demux_build_pmt_info): * src/gstpesfilter.c: (gst_pes_filter_init), (gst_pes_filter_uninit): * src/gstpesfilter.h: Simplify PES filter API to remove 'custom_adapter' field. Remove pads when changing to a new PMT. Should work for most cases, but may break when ES PIDS change type. Fix typo uniniting the section_filters. Ignore PMT's and PAT's where current_next_indicator = 0, as this indicates it is for the upcoming program. 2006-11-10 Zaheer Abbas Merali <zaheerabbas at merali dot org> * src/gstmpegtsdemux.c: (gst_fluts_demux_reset), Cleanup section filters. (gst_fluts_stream_parse_pmt), (gst_fluts_stream_parse_pat): Create stream for PMT even if program number is different to PMT's program number. If program number is set, only activate the PMT if program number is same as PMT's program number. Still needs work to make sure elementary streams' pads only get created if belonging to active PMT. 2006-11-09 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegtsdemux.c: (gst_fluts_activate_pmt), (gst_fluts_stream_parse_pmt): Make an activate_pmt function to expand shortly. 2006-11-09 Jan Schmidt <thaytan@mad.scientist.com> * src/flutspmtinfo.c: (fluts_pmt_info_class_init), (fluts_pmt_info_new), (fluts_pmt_info_get_property): * src/flutspmtinfo.h: * src/gstmpegtsdemux.c: (gst_fluts_demux_data_cb), (gst_fluts_demux_get_stream_for_PID), (gst_fluts_stream_parse_pmt), (gst_fluts_demux_parse_stream), (fluts_demux_build_pmt_info): * src/gstmpegtsdemux.h: Only issue pmt-info notifications when the PMT for the current program actually changes. 2006-11-09 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegtsdemux.c: (gst_fluts_demux_parse_transport_packet): Need to use gst_adapter_available instead of gst_adapter_available_fast. 2006-11-09 Zaheer Abbas Merali <zaheerabbas at merali dot org> * src/gstmpegdesc.h: Add a way of getting network name details from network name descriptor. * src/gstsectionfilter.c: (gst_section_filter_push): Add fixme for handling pusi correctly in all cases. 2006-11-09 Zaheer Abbas Merali <zaheerabbas at merali dot org> * src/gstmpegdesc.h: Add dvb mpeg descriptor tag definitions. 2006-11-09 Zaheer Abbas Merali <zaheerabbas at merali dot org> * src/gstmpegtsdemux.c: (gst_fluts_demux_parse_stream), Fix indentation hell. (fluts_demux_build_pmt_info): Pass PCR pid as the PCR pid when building the pmt info instead of the pmt pid. 2006-11-08 Zaheer Abbas Merali <zaheerabbas at merali dot org> * src/Makefile.am: * src/flumpegdemux.c: * src/gstmpegtsdemux.c: (gst_fluts_demux_get_stream_for_PID), (gst_fluts_stream_parse_pmt), (gst_fluts_stream_parse_pat), (gst_fluts_demux_parse_stream), (gst_fluts_demux_chain): * src/gstmpegtsdemux.h: * src/gstsectionfilter.c: * src/gstsectionfilter.h: Add section filter, which allows for sections to span across multiple transport stream packets. Make parsing functions use section filter. 2006-11-08 Jan Schmidt <thaytan@mad.scientist.com> * src/flutspmtstreaminfo.c: (fluts_pmt_stream_info_class_init), (fluts_pmt_stream_info_set_property), (fluts_pmt_stream_info_get_property): Actually implement 'pid' property on the FluTsPmtStreamInfo class 2006-11-08 Jan Schmidt <thaytan@mad.scientist.com> * src/Makefile.am: * src/flutspatinfo.c: (fluts_pat_info_class_init): * src/flutspmtinfo.c: (fluts_pmt_info_class_init), (fluts_pmt_info_init), (fluts_pmt_info_new), (fluts_pmt_info_finalize), (fluts_pmt_info_set_property), (fluts_pmt_info_get_property), (fluts_pmt_info_add_stream): * src/flutspmtinfo.h: * src/flutspmtstreaminfo.c: (fluts_pmt_stream_info_base_init), (fluts_pmt_stream_info_class_init), (fluts_pmt_stream_info_init), (fluts_pmt_stream_info_new): * src/flutspmtstreaminfo.h: * src/gstmpegtsdemux.c: (gst_fluts_demux_class_init), (gst_fluts_stream_parse_pmt), (gst_fluts_stream_parse_pat), (fluts_demux_build_pmt_info), (gst_fluts_demux_get_property): Add pmt-info property that provides a GObject with 'program-number', 'pcr-pid' and 'stream-info' properties. The 'stream-info' property is a GValueArray containing one entry per stream in the program. At the moment the objects provided by the GValueArray only provide a 'pid' property. 2006-11-08 Jan Schmidt <thaytan@mad.scientist.com> * src/flutspmtinfo.c: (fluts_pmt_info_new): * src/flutspmtinfo.h: * src/gstmpegtsdemux.c: (gst_fluts_demux_class_init), (gst_fluts_demux_parse_transport_packet), (fluts_demux_build_pat_info), (fluts_demux_build_pmt_info): Fix memory leaks in the pat-info property, and in buffers taken from the adapter. Disable the pmt-info property until it's implemented properly. 2006-11-07 Jan Schmidt <thaytan@mad.scientist.com> * src/Makefile.am: * src/flutspatinfo.c: (fluts_pat_info_new), (fluts_pat_info_base_init), (fluts_pat_info_class_init), (fluts_pat_info_init), (fluts_pat_info_set_property), (fluts_pat_info_get_property): * src/flutspatinfo.h: * src/flutspmtinfo.c: (fluts_pmt_info_base_init), (fluts_pmt_info_class_init), (fluts_pmt_info_init): * src/flutspmtinfo.h: * src/gstmpegtsdemux.c: (gst_fluts_demux_class_init), (gst_fluts_stream_parse_pat), (fluts_demux_build_pat_info), (fluts_demux_build_pmt_info), (gst_fluts_demux_get_property): Implement properties for informing the application about the PAT (Available programs) and PMT (Streams in the program) information, by presenting a GValueArray containing GObjects with readable properties. pat-info: GValueArray of objects with "program-no" and "pid" properties. pmt-info: stubbed out for now. Coming soon. 2006-11-07 Zaheer Abbas Merali <zaheerabbas at merali dot org> * src/gstmpegtsdemux.c: (gst_fluts_demux_data_cb): Fix wrap around check. 2006-11-07 Zaheer Abbas Merali <zaheerabbas at merali dot org> * src/gstmpegtsdemux.c: (gst_fluts_demux_send_new_segment), (gst_fluts_demux_data_cb), (gst_fluts_demux_get_stream_for_PID), (gst_fluts_stream_parse_pmt), (gst_fluts_demux_parse_stream): * src/gstmpegtsdemux.h: Handle pts wraparound in elementary streams by using a base time. 2006-11-07 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegdemux.h: * src/gstmpegtsdemux.c: (gst_fluts_demux_parse_stream), (gst_fluts_demux_parse_transport_packet): Use gst_adapter_take_buffer to use sub-buffering where possible and avoid copying elementary stream data. 2006-11-07 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegdemux.c: (gst_flups_demux_send_event), (gst_flups_demux_src_event): Fix some -Wextra compiler warnings about signed/unsigned comparisons and ignored values 2006-11-07 Zaheer Abbas Merali <zaheerabbas at merali dot org> * src/gstmpegtsdemux.c: (gst_fluts_demux_class_init), (gst_fluts_demux_init), (gst_fluts_demux_data_cb), (gst_fluts_stream_parse_pat), (gst_fluts_demux_parse_stream), (gst_fluts_demux_set_property), (gst_fluts_demux_get_property): * src/gstmpegtsdemux.h: New property: program-number This property allows app to set program number and so make flutsdemux ignore all programs except this one. Change some debug level GST_DEBUG to log level. 2006-11-03 Zaheer Abbas Merali <zaheerabbas at merali dot org> * src/gstmpegtsdemux.c: (gst_fluts_demux_parse_stream): Guard against datalen overflow. 2006-11-02 Wim Taymans <wim@fluendo.com> * src/gstmpegdemux.c: (gst_flups_demux_get_stream): * src/gstmpegtsdemux.c: (gst_fluts_demux_data_cb), (gst_fluts_demux_parse_adaptation_field), (gst_fluts_demux_parse_stream): Small cleanups, improve debugging. 2006-11-02 Zaheer Abbas Merali <zaheerabbas at merali dot org> * src/gstmpegtsdemux.c: (gst_fluts_demux_data_cb): Add debug on unrecognised startcodes. Fix bug where unknown stream id's cause running streams to fail with a not linked error. Thanks Wim for the fix. 2006-10-19 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegdemux.c: (gst_flups_demux_send_data): Missed a usage of applied_rate 2006-10-19 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegdemux.c: (gst_flups_demux_send_data), (gst_flups_demux_sink_event): Oops, fix the check so that _full API is used against 0.10.6 2006-10-19 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegdemux.c: (gst_flups_demux_send_data), (gst_flups_demux_sink_event): Add #if around new segment _full API usage, so that we can still build against GStreamer cores older than 0.10.6 === release 0.10.8 === 2006-10-06 Wim Taymans <wim@fluendo.com> * src/gstmpegtsdemux.c: (gst_fluts_demux_send_new_segment), (gst_fluts_demux_data_cb), (gst_fluts_demux_parse_stream): * src/gstmpegtsdemux.h: Combine flows instead of ignoring unlinked pads. 2006-10-06 Wim Taymans <wim@fluendo.com> * src/gstmpegtsdemux.c: (gst_fluts_demux_init), (gst_fluts_demux_resync): Handle sink events better. Handle DISCONT. Post an error when no streams were found when we receive EOS. 2006-10-06 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegdefs.h: * src/gstmpegdemux.c: (gst_flups_demux_create_stream), (gst_flups_demux_reset_psm), (gst_flups_demux_parse_pack_start): * src/gstmpegdemux.h: In the absence of a PSD table to tell us exactly which stream type is available, use a custom stream type value so we can output mpegversion=2 when encountering video in an MPEG-2 Pack, and mpegversion=1 if read from an MPEG-1 pack. This is the same behaviour as the gst-plugins-ugly mpeg demuxer does. * src/gstmpegtsdemux.c: (gst_fluts_demux_data_cb): Add extra debug line. 2006-10-04 Wim Taymans <wim@fluendo.com> * src/gstmpegtsdemux.c: (gst_fluts_demux_send_new_segment), (gst_fluts_stream_parse_pmt): Make sure we create a PCR stream so that we can use it to store the base_PCR in. 2006-09-28 Jan Schmidt <thaytan@mad.scientist.com> * src/gstpesfilter.c: (gst_pes_filter_parse): Fix the handling of bounded packets broken by recent changes. 2006-09-28 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegtsdemux.c: (gst_fluts_demux_parse_adaptation_field): Use Gst macros to access integers in byte arrays, rather than throwing a sigbus on architectures that don't support non-aligned access (like Sparc) 2006-09-28 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegdemux.c: (gst_flups_demux_data_cb): Add a couple of G_UNLIKELY's 2006-09-28 Zaheer Abbas Merali <zaheerabbas at merali dot org> * src/gstmpegtsdemux.c: (gst_fluts_demux_parse_adaptation_field): Fix potential overflow if private data length is unreasonably large. 2006-09-26 Wim Taymans <wim@fluendo.com> * src/gstmpegtsdemux.c: (gst_fluts_demux_base_init), (gst_fluts_demux_class_init), (gst_fluts_demux_init), (gst_fluts_demux_calc_crc32), (gst_fluts_stream_parse_pmt), (gst_fluts_stream_parse_pat), (gst_fluts_demux_set_property), (gst_fluts_demux_get_property): * src/gstmpegtsdemux.h: Added property check_crc to disable CRC checking. 2006-09-25 Wim Taymans <wim@fluendo.com> * src/gstmpegdemux.c: (gst_flups_demux_reset), (gst_flups_demux_handle_dvd_event), (gst_flups_demux_sink_event): Aliasing fixes. 2006-09-25 Jan Schmidt <thaytan@mad.scientist.com> * src/flumpegdemux.c: (plugin_init): * src/gstmpegdefs.h: * src/gstmpegdesc.h: * src/gstmpegtsdemux.c: (gst_fluts_demux_fill_stream): * src/gstpesfilter.c: Implement Dirac support 2006-09-21 Jan Schmidt <thaytan@mad.scientist.com> * src/flumpegdemux.c: * src/gstmpegdemux.c: (gst_flups_demux_sync_get_type), (gst_flups_demux_class_init), (gst_flups_demux_init), (gst_flups_demux_reset), (gst_flups_demux_create_stream), (gst_flups_demux_get_stream), (gst_flups_demux_send_data), (gst_flups_demux_send_event), (gst_flups_demux_handle_dvd_event), (gst_flups_demux_sink_event), (gst_flups_demux_src_event), (gst_flups_demux_src_query), (gst_flups_demux_reset_psm), (gst_flups_demux_parse_pack_start), (gst_flups_demux_parse_sys_head), (gst_flups_demux_resync_cb), (gst_flups_demux_data_cb), (gst_flups_demux_resync), (gst_flups_demux_is_pes_sync), (gst_flups_demux_chain), (gst_flups_demux_change_state), (gst_flups_demux_plugin_init): * src/gstmpegdesc.c: (gst_mpeg_descriptor_free), (gst_mpeg_descriptor_parse_1), (gst_mpeg_descriptor_parse), (gst_mpeg_descriptor_n_desc), (gst_mpeg_descriptor_find), (gst_mpeg_descriptor_nth): * src/gstmpegtsdemux.c: (gst_fluts_demux_class_init), (gst_fluts_demux_reset), (gst_fluts_demux_calc_crc32), (gst_fluts_demux_fill_stream), (fluts_is_elem_pid), (gst_fluts_demux_send_new_segment), (gst_fluts_demux_data_cb), (gst_fluts_demux_resync_cb), (gst_fluts_demux_is_reserved_PID), (gst_fluts_demux_get_stream_for_PID), (gst_fluts_stream_parse_cat), (gst_fluts_stream_parse_pmt), (gst_fluts_demux_parse_private_section), (gst_fluts_demux_parse_adaptation_field), (gst_fluts_stream_parse_pat), (gst_fluts_demux_is_PMT), (gst_fluts_demux_parse_stream), (gst_fluts_demux_resync), (gst_fluts_demux_chain), (gst_fluts_demux_change_state), (gst_fluts_demux_set_property), (gst_fluts_demux_get_property), (gst_fluts_demux_plugin_init): * src/gstpesfilter.c: (gst_pes_filter_init), (gst_pes_filter_init_adapter), (gst_pes_filter_uninit), (gst_pes_filter_set_callbacks), (gst_pes_filter_is_sync), (gst_pes_filter_parse), (gst_pes_filter_data_push), (gst_pes_filter_push), (gst_pes_filter_process), (gst_pes_filter_flush), (gst_pes_filter_drain): Run gst-indent over .c files. Whitespace changes only. 2006-09-21 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegtsdemux.c: (gst_fluts_demux_class_init), (gst_fluts_demux_set_property): Use strtol to read the numbers from the es-pids property string, so that PIDs in the 0x1234 hex form are interpreted automatically. Modify the property description to indicate this. 2006-09-21 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegtsdemux.c: (gst_fluts_demux_class_init), (gst_fluts_demux_init), (fluts_is_elem_pid), (gst_fluts_demux_send_new_segment), (gst_fluts_demux_data_cb), (gst_fluts_demux_get_stream_for_PID), (gst_fluts_stream_parse_pmt), (gst_fluts_demux_parse_adaptation_field), (gst_fluts_demux_parse_stream), (gst_fluts_demux_set_property), (gst_fluts_demux_get_property): * src/gstmpegtsdemux.h: * src/gstpesfilter.c: (gst_pes_filter_parse), (gst_pes_filter_data_push): Merge patch from Zaheer Abbas Merali (<zaheerabbas at merali dot org) with changes to add new 'es-pids' property for handling TS streams that have no PAT or PMT tables. 2006-09-21 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegtsdemux.c: (gst_fluts_demux_init), (gst_fluts_demux_calc_crc32), (gst_fluts_demux_send_new_segment), (gst_fluts_stream_parse_pmt), (gst_fluts_stream_parse_pat), (gst_fluts_demux_parse_stream), (gst_fluts_demux_resync): * src/gstpesfilter.c: (gst_pes_filter_parse), (gst_pes_filter_process): * src/gstpesfilter.h: Pre-allocate the PAT entries table at the size needed. Some whitespace changes. Move some recurring debug messages to LOG level and use *_OBJECT versions of the debug macros. Track unbounded packets using a separate gboolean instead of the pesfilter length field so they are handled correctly in all cases. 2006-08-22 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegdefs.h: * src/gstmpegdemux.c: (gst_flups_demux_create_stream), (gst_flups_demux_data_cb): Implement a custom stream type enum for handling raw AC3 private streams as produced by VDR * src/gstmpegdemux.h: Shrink the entries in the PSM table to gint16. 2006-08-08 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegdefs.h: * src/gstmpegdemux.c: (gst_flups_demux_reset), (gst_flups_demux_create_stream), (gst_flups_demux_handle_dvd_event), (gst_flups_demux_sink_event), (gst_flups_demux_reset_psm): * src/gstmpegdemux.h: * src/gstmpegtsdemux.c: (gst_fluts_demux_fill_stream): Partially implement handling of the language-codes event, compatible with existing GStreamer elements dvdreadsrc and dvdnavsrc. Rename ST_PS_DVD_SUBTITLE to ST_PS_DVD_SUBPICTURE 2006-06-23 Jan Schmidt <thaytan@mad.scientist.com> * configure.ac: Bump the nano back to CVS 2006-06-23 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegdemux.c: (gst_flups_demux_class_init), (gst_flups_demux_init), (gst_flups_demux_finalize), (gst_flups_demux_reset), (gst_flups_demux_change_state): * src/gstmpegdemux.h: * src/gstmpegtsdemux.c: (gst_fluts_demux_class_init), (gst_fluts_demux_init), (gst_fluts_demux_finalize), (gst_fluts_demux_reset), (gst_fluts_stream_parse_pmt), (gst_fluts_stream_parse_pat), (gst_fluts_demux_parse_stream), (gst_fluts_demux_change_state): * src/gstmpegtsdemux.h: Dynamically allocate our stream arrays to avoid object size going over GObject's 64kb limit on 64bit machines. Add cleanup of stream objects and pads when returning to READY or finalizing the element. === release 0.10.7 === 2006-05-19 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegdemux.c: (gst_flups_demux_data_cb): Ignore data for unknown streams instead of segfaulting. === release 0.10.6 === 2006-05-17 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegdemux.c: (gst_flups_demux_resync): Rework the resync code to exit quickly in the common case of immediately finding the sync point. * src/gstpesfilter.c: (gst_pes_filter_parse): Unbounded packets are only allowed for Video packets. In particular, padding streams are often 0 sized. === release 0.10.5 === 2006-05-14 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegdemux.c: (gst_flups_demux_data_cb): Make sure to reset the next_pts value so we don't output bogus timestamps remembered from other streams. * src/gstpesfilter.c: (gst_pes_filter_parse): Fix debug output 2006-05-12 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegdemux.c: (gst_flups_demux_change_state): * src/gstpesfilter.c: (gst_pes_filter_init), (gst_pes_filter_init_adapter), (gst_pes_filter_parse): * src/gstpesfilter.h: Only collect entire PES packets for Program Streams, not by default. 2006-05-12 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegdemux.c: (gst_flups_demux_send_data), (gst_flups_demux_data_cb), (gst_flups_demux_resync), (gst_flups_demux_chain): Debug output changes. Handle return values from gst_pes_filter_process. The first byte of ID_PRIVATE_STREAM_1 is usually a 'frames in this packet count'. It isn't the header length - changed the debug output. * src/gstpesfilter.c: (gst_pes_filter_parse): Add the GATHER_ENTIRE_PACKETS #define which makes PES filter collect an entire PES packet when the length is bounded before pushing it. Unbounded packets are pushed as available, as before. 2006-05-12 Jan Schmidt <thaytan@mad.scientist.com> * src/gstpesfilter.c: (gst_pes_filter_parse), (gst_pes_filter_push), (gst_pes_filter_process): The pes filter is not a GstObject - don't use the DEBUG_OBJECT macro 2006-05-11 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegdefs.h: Use gst_util_uint64_scale function. * src/gstmpegdemux.c: (gst_flups_demux_create_stream), (gst_flups_demux_send_data), (gst_flups_demux_parse_pack_start), (gst_flups_demux_parse_sys_head), (gst_flups_demux_data_cb), (gst_flups_demux_chain): * src/gstmpegdemux.h: Fix Bytes-Since-SCR calculation by tracking bytes fed into and removed from the adapter. Use sub-buffering instead of buffer copy for outgoing buffers. Don't bother creating buffers to send to not-linked pads until we're going to handle a discont and send a new-segment again. 2006-05-10 Jan Schmidt <thaytan@mad.scientist.com> * configure.ac: Bump core requirement to >= 0.10.5.1 for new NEWSEGMENT api. * src/gstmpegdemux.c: (gst_flups_demux_init), (gst_flups_demux_create_stream), (gst_flups_demux_send_data), (gst_flups_demux_sink_event): Copy applied_rate into outgoing newsegment events. Other small cleanups 2006-05-05 Wim Taymans <wim@fluendo.com> * src/gstmpegdemux.c: (gst_flups_demux_create_stream), (gst_flups_demux_get_stream), (gst_flups_demux_send_data), (gst_flups_demux_data_cb): Don't put \n in debug statements. Move some debug lines around where they make more sense. parse and debug the private1 header length. * src/gstmpegtsdemux.c: (gst_fluts_demux_send_new_segment): Stream time is 0 in the newsegment. 2006-05-05 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegtsdemux.c: (gst_fluts_demux_fill_stream): Add MPEG-4 AAC to the template caps. Add missing break statement that was adding an AAC pad incorrectly. 2006-05-04 Wim Taymans <wim@fluendo.com> * src/gstmpegdemux.c: (gst_flups_demux_resync): Turn a DEBUG into a LOG statement. * src/gstmpegtsdemux.c: (gst_fluts_demux_get_type), (gst_fluts_demux_base_init), (gst_fluts_demux_fill_stream), (gst_fluts_stream_parse_pmt): * src/gstmpegtsdemux.h: Add more caps for different stream types. Remove bogus src pad template. * src/gstpesfilter.c: (gst_pes_filter_parse): Handle errors in the unbounded PES case better. Add some more debug. === release 0.10.4 === 2006-04-17 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegdemux.c: (gst_flups_demux_send_data), (gst_flups_demux_sink_event), (gst_flups_demux_parse_pack_start): When receiving a new-segment in TIME format, use it as the base_time. Reset scr_adjust on a discont. Massage the automatic sync-method method 2006-04-12 Wim Taymans <wim@fluendo.com> * src/gstmpegdemux.c: (gst_flups_demux_chain): Don't flush twice when we did not sync to a PES syncword. Also only flush out 3 bytes as the 4th byte could be the beginning of a new syncword and we don't want to flush that byte. === release 0.10.3 === 2006-03-21 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegdemux.c: (gst_flups_demux_src_event): Allow seeks in formats other than time, if they are acceptable upstream. 2006-03-13 Wim Taymans <wim@fluendo.com> * src/gstmpegtsdemux.c: (gst_fluts_demux_fill_stream), (gst_fluts_stream_parse_pat): Name source pads more unique based on stream PID. Mark previously unknown PIDs as PMT when parsing the PAT. 2006-03-13 Wim Taymans <wim@fluendo.com> * TODO: * src/gstmpegtsdemux.c: (gst_fluts_demux_send_new_segment), (gst_fluts_demux_get_stream_for_PID), (gst_fluts_stream_parse_pmt): Set version numbers to undefined for PAT and PMT when the stream is created. 2006-03-13 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegtsdemux.c: (gst_fluts_demux_get_stream_for_PID), (gst_fluts_demux_is_PMT): * src/gstmpegtsdemux.h: Fix up some trivial crashers 2006-02-21 Wim Taymans <wim@fluendo.com> * src/gstmpegdesc.c: (gst_mpeg_descriptor_parse): Implemented some helper functions. * src/gstmpegdesc.h: Added more descriptor parsing. * src/gstmpegtsdemux.c: (gst_fluts_stream_parse_pmt), (gst_fluts_stream_parse_pat): Don't parse PAT/PMT if the version number did not change. 2006-02-21 Wim Taymans <wim@fluendo.com> * src/gstmpegdefs.h: * src/gstmpegdemux.c: (gst_flups_demux_create_stream), (gst_flups_demux_reset_psm): * src/gstmpegtsdemux.c: (gst_fluts_demux_fill_stream), (gst_fluts_demux_send_new_segment): Changed some defines. 2006-02-21 Wim Taymans <wim@fluendo.com> * src/gstmpegtsdemux.c: (gst_fluts_demux_send_new_segment), (gst_fluts_demux_parse_adaptation_field), (gst_fluts_demux_parse_stream), (gst_fluts_demux_parse_transport_packet): Get the correct PCR_PID from the current PMT. Reverse args to newsegment. * src/gstmpegtsdemux.h: Add adaptation field values. 2006-02-20 Wim Taymans <wim@fluendo.com> * src/Makefile.am: * src/gstmpegdefs.h: * src/gstmpegdemux.c: (gst_flups_demux_send_data): * src/gstmpegdesc.c: * src/gstmpegdesc.h: * src/gstmpegtsdemux.c: (gst_fluts_demux_init), (gst_fluts_demux_data_cb), (gst_fluts_demux_is_reserved_PID), (gst_fluts_demux_get_stream_for_PID), (gst_fluts_stream_parse_cat), (gst_fluts_stream_parse_pmt), (gst_fluts_demux_parse_private_section), (gst_fluts_demux_parse_adaptation_field), (gst_fluts_stream_parse_pat), (gst_fluts_demux_is_PMT), (gst_fluts_demux_parse_stream), (gst_fluts_demux_parse_transport_packet), (gst_fluts_demux_resync): * src/gstmpegtsdemux.h: Reworked a bit so that PMT/PAT are local to the streams. Create streams when found in the file even when we don't know what they are yet, this allows us to keep PCR for them. First pass at implementing descriptors parsing. Generate correct newsegment for new streams. 2006-02-09 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegtsdemux.c: Comment out gst_fluts_demux_parse_private_section to appease -Werror until the function is actually used anywhere. === release 0.10.2 === === release 0.10.1 === 2006-02-06 Jan Schmidt <thaytan@mad.scientist.com> * src/gstmpegdefs.h: * src/gstmpegdemux.c: (gst_flups_demux_sync_get_type), (gst_flups_demux_class_init), (gst_flups_demux_init), (gst_flups_demux_set_property), (gst_flups_demux_get_property), (gst_flups_demux_send_data), (gst_flups_demux_parse_pack_start), (gst_flups_demux_data_cb), (gst_flups_demux_change_state): * src/gstmpegdemux.h: Implement AUTO sync method that selects SCR or DTS based sync after each seek, and make it the default. 2006-01-24 Wim Taymans <wim@fluendo.com> * src/gstmpegdemux.c: (gst_flups_demux_sync_get_type), (gst_flups_demux_get_type), (gst_flups_demux_base_init), (gst_flups_demux_class_init), (gst_flups_demux_init), (gst_flups_demux_get_property), (gst_flups_demux_create_stream), (gst_flups_demux_get_stream), (gst_flups_demux_send_data), (gst_flups_demux_send_event), (gst_flups_demux_sink_event), (gst_flups_demux_src_event), (gst_flups_demux_src_query), (gst_flups_demux_parse_pack_start), (gst_flups_demux_parse_sys_head), (gst_flups_demux_resync_cb), (gst_flups_demux_data_cb), (gst_flups_demux_resync), (gst_flups_demux_is_pes_sync), (gst_flups_demux_chain), (gst_flups_demux_change_state): * src/gstmpegdemux.h: Added property to sync on SCR or DTS. Reworked discont handling a bit. 2006-01-17 Wim Taymans <wim@fluendo.com> * TODO: Updated. * src/gstmpegtsdemux.c: (gst_fluts_demux_init), (gst_fluts_demux_data_cb), (gst_fluts_demux_get_stream), (gst_fluts_demux_parse_pmt), (gst_fluts_demux_parse_pat), (gst_fluts_demux_find_pmt), (gst_fluts_demux_parse_transport_packet), (gst_fluts_demux_resync), (gst_fluts_demux_change_state): * src/gstmpegtsdemux.h: Use more common names such as PAT/PMT/CAT. 2006-01-17 Wim Taymans <wim@fluendo.com> * TODO: Updated TODO 2006-01-17 Wim Taymans <wim@fluendo.com> * src/gstmpegtsdemux.c: (gst_fluts_demux_fill_stream), (gst_fluts_demux_data_cb), (gst_fluts_demux_parse_program_map), (gst_fluts_demux_parse_adaptation_field), (gst_fluts_demux_parse_program_association), (gst_fluts_demux_find_pm), (gst_fluts_demux_find_es), (gst_fluts_demux_parse_transport_packet), (gst_fluts_demux_resync), (gst_fluts_demux_chain): Propagate GstFlowReturn upstream. Check crc32 values before attempting to decode a packet. 2006-01-17 Wim Taymans <wim@fluendo.com> * src/gstmpegdemux.c: (gst_flups_demux_parse_pack_start): Check some more marker bits. * src/gstmpegtsdemux.c: (gst_fluts_demux_get_stream), (gst_fluts_demux_parse_transport_packet): Remove some useless function. 2006-01-16 Wim Taymans <wim@fluendo.com> * src/Makefile.am: * src/gstmpegdefs.h: Move some common code to defs. * src/gstmpegdemux.c: (gst_flups_demux_send_data), (gst_flups_demux_send_newsegment), (gst_flups_demux_reset_psm), (gst_flups_demux_parse_pack_start), (gst_flups_demux_parse_sys_head): * src/gstmpegdemux.h: Use PES filter. Check some more markers. * src/gstmpegtsdemux.c: (gst_fluts_demux_init), (gst_fluts_demux_fill_stream), (gst_fluts_demux_data_cb), (gst_fluts_demux_get_stream), (gst_fluts_demux_push_pes), (gst_fluts_demux_parse_ca_section), (gst_fluts_demux_parse_program_map), (gst_fluts_demux_parse_private_section), (gst_fluts_demux_parse_adaptation_field), (gst_fluts_demux_parse_program_association), (gst_fluts_demux_find_pm), (gst_fluts_demux_find_es), (gst_fluts_demux_is_pes_payload), (gst_fluts_demux_parse_transport_packet): * src/gstmpegtsdemux.h: Parse PAT/PM and use them to map PID to ES streams. * src/gstpesfilter.c: * src/gstpesfilter.h: Separate the PES parser and use it in TS and PS demuxing. 2006-01-13 Wim Taymans <wim@fluendo.com> * src/gstmpegdefs.h: * src/gstmpegdemux.c: (gst_flups_demux_parse_pack_start): Move constants to defs. Calculate adjust based on orignal scr, not adjusted one. 2006-01-13 Wim Taymans <wim@fluendo.com> * src/gstmpegdemux.c: (gst_flups_demux_sink_event), (gst_flups_demux_src_event), (gst_flups_demux_parse_pack_start), (gst_flups_demux_chain), (gst_flups_demux_change_state): * src/gstmpegdemux.h: Send newsegment based on SCR instead of converted byte position. 2006-01-12 Wim Taymans <wim@fluendo.com> * src/gstmpegtsdemux.c: (gst_fluts_demux_parse_adaption_field): Parse some more stuff. 2006-01-12 Wim Taymans <wim@fluendo.com> * src/gstmpegdemux.c: (gst_flups_demux_sink_event): And reset byte counter after a flush. 2006-01-12 Wim Taymans <wim@fluendo.com> * src/gstmpegdemux.c: (gst_flups_demux_parse_pack_start), (gst_flups_demux_parse_sys_head), (gst_flups_demux_parse_pes): * src/gstmpegdemux.h: Adjust PTS/DTS/SCR instead of pushing out newsegment on discontinuities. * src/gstmpegtsdemux.c: (gst_fluts_demux_init), (gst_fluts_demux_resync), (gst_fluts_demux_chain), (gst_fluts_demux_change_state): * src/gstmpegtsdemux.h: Some cleanups. 2006-01-12 Wim Taymans <wim@fluendo.com> * src/gstmpegtsdemux.c: (gst_fluts_demux_parse_program_map), (gst_fluts_demux_parse_private_section), (gst_fluts_demux_parse_adaption_field), (gst_fluts_demux_parse_program_association), (gst_fluts_demux_is_pes_payload), (gst_fluts_demux_parse_transport_packet): PES packets have no pointer. 2006-01-12 Wim Taymans <wim@fluendo.com> * src/gstmpegdemux.c: (gst_flups_demux_init), (gst_flups_demux_create_stream), (gst_flups_demux_get_stream), (gst_flups_demux_parse_sys_head), (gst_flups_demux_parse_pes), (gst_flups_demux_resync), (gst_flups_demux_is_pes_sync), (gst_flups_demux_header_parse), (gst_flups_demux_data_push), (gst_flups_demux_chain), (gst_flups_demux_change_state): * src/gstmpegdemux.h: Prepare for PES parser separation. * src/gstmpegtsdemux.c: (gst_fluts_demux_init), (gst_fluts_demux_parse_transport_packet): Parse some more stuff. 2006-01-11 Wim Taymans <wim@fluendo.com> * src/gstmpegdemux.c: (gst_flups_demux_parse_pack_start), (gst_flups_demux_parse_sys_head), (gst_flups_demux_parse_pes): Parse some more stuff. 2006-01-10 Wim Taymans <wim@fluendo.com> * src/gstmpegdemux.c: (gst_flups_demux_parse_pes): Parse but not use some more stuff. === release 0.10.0 === 2005-12-28 Jan Schmidt <thaytan@mad.scientist.com> * configure.ac: Bump to 0.10.0 2005-12-09 Andy Wingo <wingo@pobox.com> * src/gstmpegtsdemux.h: * src/gstmpegtsdemux.c: * src/gstmpegdemux.h: * src/gstmpegdemux.c: * src/gstmpegdefs.h: * src/flumpegdemux.c: Add copyright headers. * COPYING: Use a reflowed version from the mozilla distribution. * LEGAL: Reflow. === release 0.9.7 === 2005-12-02 Jan Schmidt <thaytan@mad.scientist.com> * configure.ac: Bump for release 2005-12-02 Julien MOUTTE <julien@moutte.net> * configure.ac: Switch to 0.10. 2005-11-22 Wim Taymans <wim@fluendo.com> * src/gstmpegdemux.c: (gst_flups_demux_send_data), (gst_flups_demux_sink_event), (gst_flups_demux_send_newsegment): Fix for API changes. 2005-11-21 Michael Smith <msmith@fluendo.com> * src/gstmpegdemux.c: (gst_flups_demux_sink_event): Don't take STREAM_LOCK in sink event handlers any more. 2005-11-18 Thomas Vander Stichele <thomas at apestaart dot org> * configure.ac: back to TRUNK === release 0.9.5 === 2005-11-14 Thomas Vander Stichele <thomas at apestaart dot org> * configure.ac: releasing 0.9.5, matching GStreamer 0.9.5 2005-10-04 Thomas Vander Stichele <thomas at apestaart dot org> * Makefile.am: * gst-fluendo-mpegdemux.spec.in: releasing 0.1.3, matching GStreamer 0.9.3 2005-09-02 Thomas Vander Stichele <thomas at apestaart dot org> * src/Makefile.am: * src/flmpegdemux.c: * src/flumpegdemux.c: * src/gstmpegdemux.c: (gst_flups_demux_base_init), (gst_flups_demux_class_init), (gst_flups_demux_create_stream), (gst_flups_demux_send_data), (gst_flups_demux_send_newsegment), (gst_flups_demux_reset_psm), (gst_flups_demux_parse_pack_start), (gst_flups_demux_parse_pes), (gst_flups_demux_resync), (gst_flups_demux_chain), (gst_flups_demux_change_state): * src/gstmpegdemux.h: * src/gstmpegtsdemux.c: (gst_fluts_demux_base_init), (gst_fluts_demux_class_init), (gst_fluts_demux_create_stream), (gst_fluts_demux_parse_pes), (gst_fluts_demux_parse_transport_packet), (gst_fluts_demux_resync), (gst_fluts_demux_chain), (gst_fluts_demux_change_state): * src/gstmpegtsdemux.h: clean up build and borgify 2005-09-02 Thomas Vander Stichele <thomas at apestaart dot org> * configure.ac: put back -Werror * src/gstmpegtsdemux.c: (gst_flts_demux_init), (gst_flts_demux_create_stream), (gst_flts_demux_send_data), (gst_flts_demux_reset_psm), (gst_flts_demux_parse_pes), (gst_flts_demux_push_pes), (gst_flts_demux_parse_transport_packet): Fix compiler warnings 2005-09-02 Thomas Vander Stichele <thomas at apestaart dot org> * configure.ac: * gst-fluendo-mpegdemux.spec.in: * src/Makefile.am: fix up build a little 2005-08-29 Wim Taymans <wim@fluendo.com> * Makefile.am: * README: * TODO: * autogen.sh: * configure.ac: * gst-fluendo-mpegdemux.spec.in: * src/Makefile.am: Cleanup and prepare build env.
