From 8c416065c9018646f13847de9067a4f16ff89440 Mon Sep 17 00:00:00 2001
From: James Laska <jlaska@redhat.com>
Date: Wed, 22 Sep 2010 16:28:59 +0200
Subject: [PATCH 128/133] lvm: support for dynamic LVM SNAPSHOT root volume

I'm looking for a way to have a system with disposable storage that can be
rebooted and all filesystem changes are thrown away.  After reboot, the system
starts with a fresh root volume again.  The use case is for automated testing.
We run test scripts that could potentially not clean up after themselves.

This is almost like stateless, but the storage is local to the system (not
iSCSI, NFS or NBB).

1. Install Fedora 13 using default partition layout
  NOTE: modify the layout to leave extra room in the LVM volume group
2. Apply attached patch
3. Update grub.conf to enable dracut LVM snapshot support.  Add the following
boot arguments

 rd_LVM_SNAPSHOT=vg_test1055/lv_snap (note the VG name will depend on your
system).
 rd_LVM_SNAPSIZE= (optional, defaults to size of volume specified with by
rd_LVM_SNAPSHOT)

4. Adjust grub.conf and fstab to use LVM snapshot
 $ sed -i -e 's|lv_root|lv_snap|' /boot/grub/grub.conf
 $ sed -i -e 's|lv_root|lv_snap|' /etc/fstab
5. Reboot system

Expected results (no value provided for rd_LVM_SNAPSIZE):

  dracut: Starting plymouth daemon
  dracut: rd_NO_DM: removing DM RAID activation
  dracut: rd_NO_MD: removing MD RAID activation
  dracut: Removing existing LVM snapshot vg_test1055/lv_snap
  dracut: Logical volume "lv_snap" successfully removed
  dracut: No LVM snapshot size provided, using size of vg_test1055/lv_root (
9024.00m)
  dracut: Creating LVM snapshot vg_test1055/lv_snap  (  9024.00m)
  dracut: Logical volume "lv_snap" created
  dracut: Scanning devices sda2  for LVM logical volumes vg_test1055/lv_root
vg_test1055/lv_swap
  dracut: inactive Original '/dev/vg_test1055/lv_root' [8.81 GiB] inherit
  dracut: inactive '/dev/vg_test1055/lv_swap' [1.00 GiB] inherit
  dracut: inactive Snapshot '/dev/vg_test1055/lv_snap' [8.81 GiB] inherit
  dracut: Mounted root filesystem /dev/mapper/vg_test1055-lv_snap
  dracut: Loading SELinux policy
  dracut: Switching root

Expected results (rd_LVM_SNAPSIZE=100m):

  dracut: Starting plymouth daemon
  dracut: rd_NO_DM: removing DM RAID activation
  dracut: rd_NO_MD: removing MD RAID activation
  dracut: Removing existing LVM snapshot vg_test1055/lv_snap
  dracut: Logical volume "lv_snap" successfully removed
  dracut: Creating LVM snapshot vg_test1055/lv_snap  (100m )
  dracut: Rounding up size to full physical extent 128.00 MiB
  dracut: Logical volume "lv_snap" created
  dracut: Scanning devices sda2  for LVM logical volumes vg_test1055/lv_root
vg_test1055/lv_swap
  dracut: inactive Original '/dev/vg_test1055/lv_root' [8.81 GiB] inherit
  dracut: inactive '/dev/vg_test1055/lv_swap' [1.00 GiB] inherit
  dracut: inactive Snapshot '/dev/vg_test1055/lv_snap' [128.00 MiB] inherit
  dracut: Mounted root filesystem /dev/mapper/vg_test1055-lv_snap
  dracut: Loading SELinux policy
  dracut: Switching root
---
 modules.d/90lvm/lvm_scan.sh |   39 +++++++++++++++++++++++++++++++++++----
 1 files changed, 35 insertions(+), 4 deletions(-)

diff --git a/modules.d/90lvm/lvm_scan.sh b/modules.d/90lvm/lvm_scan.sh
index 784329e..8bf6727 100755
--- a/modules.d/90lvm/lvm_scan.sh
+++ b/modules.d/90lvm/lvm_scan.sh
@@ -6,6 +6,8 @@
 
 VGS=$(getargs rd_LVM_VG=)
 LVS=$(getargs rd_LVM_LV=)
+SNAPSHOT=$(getargs rd_LVM_SNAPSHOT=)
+SNAPSIZE=$(getargs rd_LVM_SNAPSIZE=)
 
 [ -d /etc/lvm ] || mkdir -p /etc/lvm
 # build a list of devices to scan
@@ -25,10 +27,17 @@ if [ ! -e /etc/lvm/lvm.conf ]; then
 	done;
 	echo '"r/.*/" ]';
 	echo '}';	  
-	# establish read-only locking
-	echo 'global {';
-	echo '    locking_type = 4';
-	echo '}';
+
+	# establish LVM locking
+    if [ -n $SNAPSHOT ]; then
+        echo 'global {';
+        echo '    locking_type = 1';
+        echo '}';
+    else
+        echo 'global {';
+        echo '    locking_type = 4';
+        echo '}';
+    fi
     } > /etc/lvm/lvm.conf
     lvmwritten=1
 fi
@@ -57,6 +66,28 @@ nopoll=$(
 	check_lvm_ver $maj $min $sub && \
 	    echo " --poll n ") 2>/dev/null )
 
+if [ -n "$SNAPSHOT" ] ; then
+    # HACK - this should probably be done elsewhere or turned into a function
+    # Enable read-write LVM locking
+    sed -i -e 's/\(^[[:space:]]*\)locking_type[[:space:]]*=[[:space:]]*[[:digit:]]/\1locking_type =  1/' ${initdir}/etc/lvm/lvm.conf
+
+    # Expected SNAPSHOT format "<orig lv name>:<snap lv name>"
+    ORIG_LV=${SNAPSHOT%%:*}
+    SNAP_LV=${SNAPSHOT##*:}
+
+    info "Removing existing LVM snapshot $SNAP_LV"
+    lvm lvremove --force $SNAP_LV 2>&1| vinfo
+
+    # Determine snapshot size
+    if [ -z "$SNAPSIZE" ] ; then
+        SNAPSIZE=$(lvm lvs --noheadings  --units m --options lv_size $ORIG_LV)
+        info "No LVM snapshot size provided, using size of $ORIG_LV ($SNAPSIZE)"
+    fi
+
+    info "Creating LVM snapshot $SNAP_LV ($SNAPSIZE)"
+    lvm lvcreate -s -n $SNAP_LV -L $SNAPSIZE $ORIG_LV 2>&1| vinfo
+fi
+
 if [ -n "$LVS" ] ; then
     info "Scanning devices $lvmdevs for LVM logical volumes $LVS"
     lvm lvscan --ignorelockingfailure 2>&1 | vinfo
-- 
1.7.3