Replied: Sat, 04 Sep 1999 09:11:46 +0200 Replied: "dev " Return-Path: POPmail X-Envelope-From: <Ola@Sigurdson.SE> X-Envelope-To: <hessler@wi-inf.mhessler.de> X-Delivery-Time: 936100367 Received: from hsun6.wi-inf.uni-essen.de (hsun6.wi-inf.uni-essen.de [132.252.52.7]) by post.webmailer.de (8.9.3/8.8.7) with ESMTP id NAA17635 for <hessler@wi-inf.mhessler.de>; Tue, 31 Aug 1999 13:52:43 +0200 (MET DST) Received: from abaco.to.com (abaco.to.com [194.221.235.40]) by hsun6.wi-inf.uni-essen.de (8.8.8/8.8.8) with ESMTP id NAA08801 for <hessler@wi-inf.uni-essen.de>; Tue, 31 Aug 1999 13:53:23 +0200 (MET DST) Received: from Sigurdson.SE (t4o79p57.telia.com [62.20.201.177]) by abaco.to.com (8.9.1/8.9.1) with ESMTP id NAA11117 for <hessler@isdn4linux.de>; Tue, 31 Aug 1999 13:53:48 +0200 Received: from Sigurdson.SE (IDENT:ola@ws001019.warholm.sigurdson.se [192.168.1.19]) by Sigurdson.SE (8.9.3/8.9.3) with ESMTP id NAA03344 for <hessler@isdn4linux.de>; Tue, 31 Aug 1999 13:52:39 +0200 Sender: ola@Sigurdson.SE Message-ID: <37CBC1FF.B5B1535D@Sigurdson.SE> Date: Tue, 31 Aug 1999 13:52:31 +0200 From: Ola Sigurdson <Ola@Sigurdson.SE> Organization: OS System X-Mailer: Mozilla 4.08 [en] (X11; I; Linux 2.2.12-i686-SMP i686) MIME-Version: 1.0 To: Matthias Hessler <hessler@isdn4linux.de> Subject: GSM over V.110 to Linux (Re: V.110) References: <199908282216.AAA02037@mathes.mhessler.de> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hello, Matthias Hessler wrote: > I have good news for you: I think the FAQ is lying, and actually, > V.110 is supported now. However, since I have not tried it, and it's > not widly used (and has been implemented not too long ago), I don't > know how to configure it, and how well it works. But have a look for > yourself - the code is in isdn_v110.c. Ok, thanks (I should of course have checked the latest kernel first... I was running 2.2.9). > I'll correct the FAQ - thanks for the catch! And I'm happy on any > feedback how well it works for you... Works! (See below) Please find enclosed the pppd (async ppp, *not* sync) config file that works for us. Feel free to use it in the FAQ. If I get the time I'll revise it and submit it as a mini-HOWTO. For now, it is at the current URL: http://www.oltom.com/Linux/Docs/GSM%20over%20V.110%20Mini-HOWTO.txt /Ola Sigurdson -- Email: Ola@Sigurdson.SE Office tel: +46 46 37 01 24 ------------------------------------------------------------------- http://www.oltom.com/Linux/Docs/GSM%20over%20V.110%20Mini-HOWTO.txt ------------------------------------------------------------------- V.110 works very well for incoming GSM connections from a Palm Pilot! (After some detective work for V.110 and service parameters.) Observe that the GSM operator must have a V.110 enable net for this to work. The main benefit compared to traditional GSM-data is that connection setup is much faster. Also transmission delay and error rate is slightly lower with V.110 In non-V.110 GSM the data call is routed through the operator's net to a modem-pool. From there the call goes out as an ordinary anlogue call over the PSTN to the dial-in server. For V.110 GSM the data call goes to the operator's switch, is converted to V.110 and routed over ISDN to the dial-in ISDN-card. Call setup and data transfer is digital end-to-end. GSM over V.110 Micro-HOWTO: ------------------------------------------------------------------------------ Get a kernel with V.110 and ISDN-support. 2.2.12 works for us. Test your ISDN setup according to /usr/src/Documentation/isdn/* Use the standard async PPP daemon on an /dev/ttyIx device. Example config files are provided below. The main trick to get GSM and V.110 working is the S19=0 register setting. (The isdn4l code sets it to 197 by default. Is this correct?) The config has been tested with the Swedish Comviq (Tele2) operator, Palm III, Option Snap-On adapter, Eicon Diva 2.01 PCI, Redhat 6.0, Kernel 2.2.12. Possibly other operators or hardware require different settings. Note the "noccp" and "require-pap" option that disables compression and CHAP, which the Palm III cannot handle. If you use devices that can handle these protocols, remove the corresponding options. Parameters to change according to local setup: ---------------------------------------------- /dev/ttyI0 Device you want to use for incoming GSM calls. If unsure, leave it. 0123456789 Your MSN for incoming GSM calls. DialInIP:PalmIP IP address of ppp interface on dialin server, IP address that should be assigned to Palm device. (If you use symbolic instead of numeric names they must be defined in the DNS.) palm Name for finding secret for Palm device in /etc/ppp/pap-secrets dialin Name for finding secret for Palm device in /etc/ppp/pap-secrets PASSWORD Your PPP PAP password ---------- /etc/ppp/options.ttyI0 ------------- /dev/ttyI0 lock connect '/usr/sbin/chat -t 1 "" "AT&F" "OK" "AT&E0123456789&R9600S19=0S0=1" "OK"' idle 300 persist passive crtscts modem DialInIP:PalmIP nodefaultroute proxyarp ms-dns 192.168.0.1 noccp noipx auth require-pap remotename palm name dialin ----- /etc/ppp/pap-secrets --------------------- palm dialin PASSWORD PalmIP ----- /etc/inittab ----------------------------- I0:35:respawn:/usr/sbin/pppd /dev/ttyI0 nodetach # nodetach required for things started from init ------ Modem init string for Palm ------------- AT&FX4+CBST=71,0,1
