0.1 Initial release 1.0 - Change net scale from absolute to relative, with option to revert to absolute (-nsa --net-scale-absolute). SVN: - Improve response time when switching screens. - Battery status monitoring courtesy of Pieter De Wit - Detect if Network interface is incorrect and disable netscreen. Resolves 100% cpu issue reported by Guy Dierx. SVN 504: - Bottom row information rotation switched with the L5 key - 3 additional CPU graph variants switched with the L4 key (at this moment for multi core processors only) - New default CPU Screen (at this moment for multi core processors only) - Display unicore graphs only on the CPU screen with the option -u (--unicore) SVN 505: - Bugfix: Render bottom line on the Memory Screen once SVN 509: - Temperature sensors depends on the lmsensors sysfs filesystem SVN 510: - Temperature sensor's autodetect - Force user sensor id with the option -s id (The id should point to sysfs path /sys/class/hwmon/hwmon[id]/device/temp1_input) SVN 511: - Improve sensor's autodetect - Clean up SVN 512: - CPU Screens variants for uni core processors - CPU frequency info (if available) - Battery Screen is enabled if available - Clean up SVN 513: - Improve bottom line and keywatch logic SVN 514: - Many fixes, clean up - Changed version to 1.90 - CPU Frequency use proper sysfs variable - New Summary Screen indicators - Network current traffic info in the bottom line - Refactor CPU variants into separates additional screens: Summary, CPU and CPU Freq. - New Fan Speed Screen - After change screen cycle the info bar content is set to the screen default one. - Net Screen scaling is now controlled with the L4 key - Force start temperature sensor id with the option -t id (The id should point to sysfs path /sys/class/hwmon/hwmon[id]/...) - Force start fan speed sensor id with the option -f id (The id should point to sysfs path /sys/class/hwmon/hwmon[id]/...) - Force to show temperature [id] in place of the maximal one on the Summary Screen with the option ie -gt 1 (the id should point to sysfs path /sys/class/hwmon/hwmon../device/temp[id]_input) - On the Fan / Temp Screen Current sensor is controlled with the L4 key (on systems with more then one sensor only). - Every Screen has his own mode now (except Swap, Memory and Battery Screen) SVN 515 (1.90): - Fixed temperature / fan sensor lost - Fixed screen cycle SVN 516: - Refactored temperature and fan speed - share the logic SVN 517: - Improve Bat Screen deactivation logic (now is it similar to SVN 515: Fixed temperature / fan sensor lost) SVN 518 (1.91): - Fix Summary, Freq and CPU Screens for some variants of the cpu cores number - Improve Summary Screen SVN 519 - Change default mode for Freq and Summary Screen - Improve Summary Screen for cpus with more then 7 cores SVN 520 (1.9.2) - Disable monitoring CPUs frequencies with the option -df - Improve Summary Screen without CPUs frequencies